[89_tintop]

as the topic sais.. what do people use and what do people find to be the best in the transfer case

[hutch]

Did u put the 6.5 gears in yourself. I need to do mine soon. Any tips?
I was gonna run the standard castrol 80/90.

[want33s]

Standard recommended transfer oil is the go. Castrol VMX80...

[Gwagensteve]

I run heavy weight Redline shockproof in mine.

IMHO normal 80/90W is fine though.

Steve.

[shep]

i have vmx80 with about 200ml of moreys.

[want33s]

$15-$20 for Castrol or $100-$150+ for Redline.

[89_tintop]

Hey hutch
no I didn't install them myself.. Got them already in a box. So I have no idea.. They are suppose to be fairly easy to install..

Cheers guys for the response.. I just wasn't sure if they run some special oil
in them..

Moreys?? Is it similar to gearbox treatment??

[shep]

moreys is just an additive, because it is so hot here i recon gear oil needs a bit of help.

[ajsr]

i use 80% moreys 20% 90w gear oil

[twitchy]

Simple......... Penrite.

[hutch]

shep wrote:

with about 200ml of moreys.

Is that to keep the seals soft?

[shep]

i don't think it affects the seals, it is a oil stabiliser.

[89_tintop]

will i put the transfer into the car.. i ended using a 80/90 and some moreys..
am amazed at how low low range now is... it blew me away... the best mod by far.. and got them for a steel..
$300 and some time to sought out why his car wouldnt start after an engine conversion (took me 5 minutes) blown fuse and fusible link.. hehehe

[shep]

i recon gearing is the most important mod that can be done to a sierra.