auszookers.com • View topic - bad 1.3 transfercase

Board index » Talking About Stuff » Suzuki Talk

bad 1.3 transfercase

Page 1 of 1

[ 16 posts ]

Print view

Previous topic | Next topic

Author

Message

neilss

Joined: Sun Sep 20, 2009 11:30 pm
Posts: 72
Location: adel

Posted: Mon Sep 21, 2009 9:21 pm

g'day all im abit of a newbie and was after some help. my sierra transfercase is making abit of a rattle when im not accelerating ( for example rolling down hills) and it slips out of 4h when going over bumps some times, are they easy to fix or better off buying a second hand one.
cheers

lump_a_charcoal

az supporter

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Posted: Mon Sep 21, 2009 9:56 pm

If it is rooted it would be easier to buy a second hand one with a 3 month warranty.

I'll buy your stuffed one if you go that way...

jakeyr

Joined: Wed Sep 09, 2009 11:30 pm
Posts: 93
Location: perth

Posted: Mon Sep 21, 2009 10:05 pm

i got a price from a wreaker on a second hand one $550. i bit pricy i thought, could it just be the bearings have worn?

hutch

az supporter

Joined: Sun Nov 30, 2008 10:30 pm
Posts: 1214
Location: SW Bris

Posted: Mon Sep 21, 2009 10:13 pm

jakeyr wrote:

i got a price from a wreaker on a second hand one $550. i bit pricy i thought, could it just be the bearings have worn?

I got a price today $350 MINDEN wreckers but they dont have one

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Mon Sep 21, 2009 10:59 pm

hutch wrote:

jakeyr wrote:

i got a price from a wreaker on a second hand one $550. i bit pricy i thought, could it just be the bearings have worn?

I got a price today $350 MINDEN wreckers but they dont have one

So why would thay give a price???

_________________
I used to be indecisive,
now I'm not so sure.....

BJPK

Joined: Thu Feb 19, 2009 10:30 pm
Posts: 786
Location: perth

Posted: Mon Sep 21, 2009 11:02 pm

550 seems a bit steep.
even by perth standards.

lump_a_charcoal

az supporter

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Posted: Mon Sep 21, 2009 11:02 pm

Around $350 is pretty standard these days for a good second hand jobbie.

jakeyr

Joined: Wed Sep 09, 2009 11:30 pm
Posts: 93
Location: perth

Posted: Mon Sep 21, 2009 11:23 pm

just wondering how much are the bearing kits?

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Mon Sep 21, 2009 11:32 pm

jakeyr wrote:

just wondering how much are the bearing kits?

Low Range Offroad

neilss

Joined: Sun Sep 20, 2009 11:30 pm
Posts: 72
Location: adel

Posted: Tue Sep 22, 2009 1:37 am

are all the 1.3 cases interchangeable?

lump_a_charcoal

az supporter

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Posted: Tue Sep 22, 2009 1:51 am

Yes

neilss

Joined: Sun Sep 20, 2009 11:30 pm
Posts: 72
Location: adel

Posted: Tue Sep 22, 2009 1:57 am

mine has the hand brake on the back of the case and the one im looking at doesn't so does the hand brake drum bolt onto the other case

lump_a_charcoal

az supporter

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Posted: Tue Sep 22, 2009 2:04 am

Should do, are the cases the same shape?
Some flange swapping may be in order...

neilss

Joined: Sun Sep 20, 2009 11:30 pm
Posts: 72
Location: adel

Posted: Tue Sep 22, 2009 8:36 pm

they look the same shape, has anyone on here done this before that is swapped there nt transfer case with a wt transfer case

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8135
Location: Sunshine Coast Qld

Posted: Tue Sep 22, 2009 10:31 pm

NT and WT cases are identical.
The NT handbrake drum will bolt onto the WT transfer and the NT flanges will go straight on as well.

neilss

Joined: Sun Sep 20, 2009 11:30 pm
Posts: 72
Location: adel

Posted: Tue Sep 22, 2009 11:31 pm

ok cheers

Page 1 of 1

[ 16 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 103 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum