| Author |
Message |
LWK96
Joined: Wed Apr 06, 2016 9:28 pm Posts: 20 Location: Melton, VIC
Vehicle: 1996 Vitara JX
|
 Posted: Wed Jun 01, 2016 9:16 pm |
|
|
Hey all, Installed my Spartan locker and steel diff housing in my vit on the weekend, took it for its first drive today. Put it in 4wd with the hubs locked and it is extremely hard to steer. Like I mean ridiculous. A mate has one exactly the same but with power steer. He said his is really stiff in 4wd too even with power steer. Just wondering if anyone has the same thing happen and if it's normal! Thanks in advance! LK
|
|
|
|
 |
J--A--C--K
Joined: Tue Jan 10, 2012 3:48 am Posts: 253 Location: melbourne
|
 Posted: Wed Jun 01, 2016 9:41 pm |
|
|
Locked fronts bring the suck with steering. It's normal, hence why a lot of people say to save up for selectable lockers in the front end. And 99% of your driving won't require a front locker.
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Thu Jun 02, 2016 7:12 am |
|
|
My lock rite front is very easy to steer
|
|
|
|
 |
LWK96
Joined: Wed Apr 06, 2016 9:28 pm Posts: 20 Location: Melton, VIC
Vehicle: 1996 Vitara JX
|
 Posted: Thu Jun 02, 2016 12:31 pm |
|
|
Cheers all! Will take it for a few runs and see how it goes. As long as all wheels are driving I will deal with it! Haha
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Thu Jun 02, 2016 2:07 pm |
|
|
They can be stiff to unlock when first fitted, mine was. Once oil got around it freed up. Mine works best on thinner oil, it is less good with thicker diff oils.
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13007 Location: Melbourne
|
 Posted: Thu Jun 02, 2016 2:15 pm |
|
|
Sounds like it isn't unlocking.
|
|
|
|
 |
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
 Posted: Thu Jun 02, 2016 8:48 pm |
|
|
When he says its hard to steer its bloody hard to steer! I would say 3 times worse then my sierra on 34s.... will it free up or whats the go it deffinatly isnt unlocking
|
|
|
|
 |
christover1

az supporter
Joined: Tue Jul 15, 2008 11:30 pm Posts: 8203 Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB
|
 Posted: Thu Jun 02, 2016 9:03 pm |
|
|
Possibly left in the cup washers, not allowing enough room for the mechanism yo slide
|
|
|
|
 |
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
 Posted: Sat Jun 04, 2016 2:13 pm |
|
|
There deffinatly out.... went out last night its deffinatly not unlocking withch is better then it being open i guess haha
Will continue the build and come back to it when his got some free time
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13007 Location: Melbourne
|
 Posted: Sat Jun 04, 2016 3:08 pm |
|
|
Ow. That's going to be hard on the CV's.
|
|
|
|
 |
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
 Posted: Sat Jun 04, 2016 3:48 pm |
|
|
Id reckon! The presure it takes to steer im amazed it hasnt bent a steering arm!
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Tue Jun 07, 2016 7:20 pm |
|
|
sounds like it hasn't been set up correctly..... pull it out and bring it over.
|
|
|
|
 |
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
 Posted: Tue Jun 14, 2016 10:37 am |
|
|
Bloke has done all my diffs for years... it will get pulled out again once the build is done was put back together after a frustrating morning of about 6 diffs merging into 1 haha
|
|
|
|
 |
|