[shep]

Does anyone have any pics of the assembled kits. About to fit them to a spare housing and can't see how it all goes together.

[shep]

Slowly getting there with zero info. So far have had to mod every part including the diff housing.

Does the original wheelbearing get used or is the axle now supported by the diff centre and the centre bearing in the stub axle

[Gwagensteve]

Original wheel bearing should be discarded - that's what makes the axle fully floating.

Steve.

[shep]

Bugger. Ball was right.

Cheers

[31zook]

Im unsure on which model you recieved but if you go through my build thread you will see all that i had to modify

[ball]

shep wrote:

Bugger. Ball was right.

Cheers

[shep]

31zook wrote:

Im unsure on which model you recieved but if you go through my build thread you will see all that i had to modify

Most of the issues I have had so far involve fitting it around the abs bits. The kit must have been for a non abs diff.
Even down to one of the stub axle bolts hitting the lumpy bit on the diff where the sensor goes.

[shep]

Not a chance that this kit can be fitted to a jimny with abs. But pissed off that I have wasted money and time on it

[alien]

On the up side, at least you can re-sell it to re-coup costs?

[tanshi]

yeah that's a shame, it can be pretty hard to get the bolt to clear but ive managed it with mine. just need to mill a bit out of the floater adapter on mine to clear the abs bung

[shep]

I have everything fitting except for the abs ring. Cbf making new axles.

[shep]

What choices are there for rear disks on a abs jimny? Don't really care to much about full floater.

Are there any actual kits that fit and use Nissan callipers?