[TALLEN7]

Hi everyone, is anyone on here from WA that can wire in a G16B into a sj70, i'm having heaps of issues.

Been using warbirds guide but things don't seem to be adding up, I may even have the wrong ECU and/or wiring harness.

Thanks in advance, Tom.

[MrRocky]

What g16b motor is it ?
Im in wa and can do full plug and play baleno g16b harness but dont do the vitara g16 ones.

[rexhunta]

The warbirds manual only covers series 1 vitara, not series 2 which runs a different loom/ecu/afm/injectorloom.

[TALLEN7]

rexhunta wrote:

The warbirds manual only covers series 1 vitara, not series 2 which runs a different loom/ecu/afm/injectorloom.

I'm starting to think that's my issue. it must be a series 2 as i have the 5 pin afm and the injector loom doesn't match up what so ever with his write up, I also have a 2 pin dizzy

Is it still possible to do the conversion?

[TALLEN7]

rexhunta wrote:

The warbirds manual only covers series 1 vitara, not series 2 which runs a different loom/ecu/afm/injectorloom.

I'm thinking that's what my issue is, would you know if the swap is still possible, would i just need an obd2 diagram and work it out from there or do i need to swap components over?

Thanks for the replies.

[TALLEN7]

WHY ARENT MY REPLIES BEING POSTED!!!!!!!!!

[henno]

TALLEN7 wrote:

WHY ARENT MY REPLIES BEING POSTED!!!!!!!!!

Turn the volume down; new members join a moderation queue that needs to be approved.

[rexhunta]

I've done both series Vitara, the 2nd series being easier then the first. Depending on how literate you are with wiring diagrams, I can put up the ecu pinouts for the 2nd series. You'll have the hotwire AFM if it is, and the smaller Dizzy cap.

edit :

series 1 is the 5 pin AFM that is the vane type.
series 2 is the hotwire afm which is 3 pin.