[bogga]

Any recommendations on a after market brake proportioning valve, 2 line into one.

Set up with vit vented front discs, sierra discs rear with ADD floater kit, sierra MC.

[Gwagensteve]

I use the one from low range offroad. (I think it's a Wilwood part) Works very well.

You might find the Sierra MC a little small - pedal might be a but low/long.

Easy enough to swap to a larger cylinder like a forester 15/16

Steve.

[bogga]

Was looking at the lror one.
Is the Forester good as bolt in?

[Gwagensteve]

Yes - just need a pushrod mod. Theres a couple of different diameters so you can tune pedal feel to suit. Because I'm unboosted I've swapped down from the 1 1/16" GT MC to a regular 15/16 forester MC, but with a booster I don't think that's necessary. They're cheap enough and plentiful from a pull it yourself wrecker.

[bogga]

Thanks Steve

[BlueSuzy]

I think mine is a spidertrax one. There's many different brands.

My front brake circuit is separate to my rear

[Gwagensteve]

I think all narrow tracks are front/rear split.

I reckon nearly all valves come from wilwood, the reseller just puts them in their own bag.

[THE_DICTATOR]

SJ50 wide track are front rear as well