auszookers.com • View topic

Board index » Shift It And Find It » Getting rid of stuff

Wrecking Coily

Page 1 of 1

[ 23 posts ]

Print view

Previous topic | Next topic

Author

Message

tuffcoily

Joined: Wed Dec 16, 2009 10:30 pm
Posts: 306
Location: Gold coast

Posted: Thu Mar 16, 2017 12:52 pm

Plenty of parts available 159000 klms I am keeping doors and front clip,

Some of the parts still available,
Door trims
Front and rear diffs
Transfer case
Motor 1.3
Tub
Chassis
Front and rear seats
Dash
Suspension arms also have some jimny ones
Fuel tank dents in bottom
Complete exhaust
Steering box
Panhards
Seat belts
Accelerator cable
Steering column also have jimny one with steering wheel
Etc message with what you need.

tanked

Joined: Sat Jul 04, 2015 2:34 pm
Posts: 201
Vehicle: 89 suzuki sierra

Posted: Thu Mar 16, 2017 5:53 pm

how much for transfer and is it stock type?

tuffcoily

Joined: Wed Dec 16, 2009 10:30 pm
Posts: 306
Location: Gold coast

Posted: Thu Mar 16, 2017 6:54 pm

Standard coily chain driven transfer $40 condition unknown but think it is ok
Also have a couple of standard wide track transfers

HarryHoudini

Joined: Fri Jul 01, 2011 12:34 am
Posts: 356
Location: Northern NSW Australia.
Vehicle: Coily.

Posted: Thu Mar 16, 2017 8:41 pm

Motor, Ok? & price.

Edit...$400,i will run it past my brother but we have other options at this stage.Thanks for quick reply.

_________________
Regards All from far Northern NSW.

Last edited by HarryHoudini on Thu Mar 16, 2017 8:58 pm, edited 1 time in total.

tuffcoily

Joined: Wed Dec 16, 2009 10:30 pm
Posts: 306
Location: Gold coast

Posted: Thu Mar 16, 2017 8:44 pm

Good low klm motor $400

tuffcoily

Joined: Wed Dec 16, 2009 10:30 pm
Posts: 306
Location: Gold coast

Posted: Fri Mar 17, 2017 10:07 am

$300 for the engine if you come get it out of my shed this weekend comes with carby, dizzy with leads, exhaust manifold and good clutch and flywheel

HarryHoudini

Joined: Fri Jul 01, 2011 12:34 am
Posts: 356
Location: Northern NSW Australia.
Vehicle: Coily.

Posted: Fri Mar 17, 2017 1:38 pm

Ok,see PM.

_________________
Regards All from far Northern NSW.

kenzook

Joined: Sun Nov 30, 2014 2:54 pm
Posts: 153
Location: gold coast
Vehicle: 98 sierra coily

Posted: Sun Mar 19, 2017 8:19 am

do u have stock/stock height coils?

tuffcoily

Joined: Wed Dec 16, 2009 10:30 pm
Posts: 306
Location: Gold coast

Posted: Sun Mar 19, 2017 9:16 am

No only jimny ones but they might do the trick they are in it now welcome to come and have a look at how it sits

suzukikid

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Posted: Sun Mar 19, 2017 10:27 am

What you after for door trims? And can you be bothered posting them?

_________________
back in a built sierra!

kenzook

Joined: Sun Nov 30, 2014 2:54 pm
Posts: 153
Location: gold coast
Vehicle: 98 sierra coily

Posted: Sun Mar 19, 2017 4:01 pm

tuffcoily wrote:

No only jimny ones but they might do the trick they are in it now welcome to come and have a look at how it sits

nah ive got a set of stock jimny. thanks anyway.

tuffcoily

Joined: Wed Dec 16, 2009 10:30 pm
Posts: 306
Location: Gold coast

Posted: Tue Mar 21, 2017 8:50 pm

$200 for the door trims but dont really have time to do postage.

suzukikid

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Posted: Wed Mar 22, 2017 5:27 pm

No worries worth a try

_________________
back in a built sierra!

greenzook89

az supporter

Joined: Sun Sep 06, 2009 11:30 pm
Posts: 2591
Location: Ipswich
Vehicle: LJ80V-II, SJ40, SJ40T, RS415

Posted: Thu Mar 23, 2017 11:29 am

How much for acclerator cable? Can organise Skippy to come and get it.

_________________

31zook wrote:

Makes me want something similar

VitNick

Joined: Sun Feb 03, 2013 8:47 am
Posts: 302
Vehicle: 92 WT Sierra

Posted: Sat Mar 25, 2017 8:39 am

Still have the tank? And same here can organise shipping to pick up

tuffcoily

Joined: Wed Dec 16, 2009 10:30 pm
Posts: 306
Location: Gold coast

Posted: Mon Mar 27, 2017 8:16 am

Think i have 2 accelerator cables $20 each
Still have the tank bottom is pretty dented up and has small pin hole could be welded and still used $20

BribieCoily

newbie

Joined: Wed Jul 26, 2017 4:31 pm
Posts: 1
Vehicle: 98 sierra

Posted: Wed Jul 26, 2017 4:38 pm

How much for the front and rear seats if you still have them? I will need them with sliders and rear floor catch and rear belts thanks. Jim

Racer2304

Joined: Sat Sep 07, 2013 8:51 pm
Posts: 8
Vehicle: 1982 sierra rusted

Posted: Sun Sep 03, 2017 6:22 pm

Hi got any parts left?

Marn

Joined: Fri Nov 13, 2015 9:08 am
Posts: 34
Vehicle: sj80

Posted: Sun Jan 14, 2018 6:44 am

Do you still have this? Im chasing a complete wiring loom

mitchell_bertram

Joined: Mon Nov 28, 2011 2:11 am
Posts: 5
Location: brisbane, qld

Posted: Mon May 14, 2018 9:24 am

Bit of a long shot but got any parts left?
After a rear diff

greavesyzook

Joined: Fri Apr 01, 2016 9:22 pm
Posts: 359
Location: Victoria "south Gippsland"
Vehicle: 1992 suzuki sierra hardtop

Posted: Mon May 14, 2018 10:04 am

mitchell_bertram wrote:

Bit of a long shot but got any parts left?
After a rear diff

he hasnt been online since may 2017

mitchell_bertram

Joined: Mon Nov 28, 2011 2:11 am
Posts: 5
Location: brisbane, qld

Posted: Mon May 14, 2018 10:59 am

greavesyzook wrote:

mitchell_bertram wrote:

Bit of a long shot but got any parts left?
After a rear diff

he hasnt been online since may 2017

No worries.
Thanks

suzukitas

Joined: Wed Aug 26, 2015 10:48 pm
Posts: 245
Vehicle: sc100 se416 mightyboy

Posted: Sun May 20, 2018 11:35 pm

Ive got some SJ80 parts if anyone requires some. Brad 0437097475

_________________
Why make your Suzuki like a Vitara, Just get one.

Page 1 of 1

[ 23 posts ]

Board index » Shift It And Find It » Getting rid of stuff

Who is online

Users browsing this forum: No registered users and 37 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum