It is currently Sun Jul 26, 2026 9:03 am
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 5 posts ] 
Author Message

Offline

Joined: Thu Sep 01, 2011 11:48 pm
Posts: 814
Location: kinglake, VIC

Post Posted: Sun Mar 26, 2017 2:18 pm 
Reply with quote Top  
Setting up the steering on my front diff.

Coils lux diffs 60 steering.

The steering arm is inline with the panhard at the diff but up at the pitman it is 30mm lower centre to centre, basically the bar thickness out.

Is this going to cause big issues with bump steer or is it acceptable?

Its about as close as i can get it withe the diff and arms all wanting to be in the same spot.


Cheers!

Edited to make sense

_________________
I love lamp

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Post Posted: Sun Mar 26, 2017 9:29 pm 
Reply with quote Top  
You will want them parallel.

It probably won't make much of a difference. If its for onroad, Try get it perfect.

_________________
BlueSuzy wrote:
I'm over the G16b's.

 Profile  

Offline

Joined: Sat Jul 18, 2009 11:30 pm
Posts: 2372
Location: Ballarat, VIC

Post Posted: Mon Mar 27, 2017 6:51 am 
Reply with quote Top  
+1
Ideally parallel.
Lower the pin at the diff 30mm if you can.

To be honest, even at 30mm out the steering will be significantly better than a leaf sierra.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Oct 29, 2010 1:53 pm
Posts: 5935
Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.

Post Posted: Mon Mar 27, 2017 12:51 pm 
Reply with quote Top  
I don't think it really matters, most 4wds don't have them lined up anyway. Obviously parallel is ideal though.

Unless you fitted the panhard backwards (chassis end passengers side) it's always going to be a million miles better than just leaf springs which obviously work on a vertical axis as opposed to the arc of the drag link. I've never driven a leaf sprung car where bump steer was an issue.

 Profile  

Offline
User avatar

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Post Posted: Mon Mar 27, 2017 4:12 pm 
Reply with quote Top  
See how this:

sideways wrote:
it's always going to be a million miles better than just leaf springs which obviously work on a vertical axis as opposed to the arc of the drag link.


and this

Quote:
I've never driven a leaf sprung car where bump steer was an issue.


Seemingly contradict each other?

Yet, bumpsteer is real and an issue in 4WD's with a panhard rod, and in some road cars.

That's because bumpsteer isn't as much of an issue in leaf spring cars because there's always plenty of lateral movement in the springs and bushes.

Sure if you bounce a leaf car up and down the steering wheel swings freely, but if you hold the steering wheel and someone bounces the car, there's very little force behind that movement. but put an out of phase panhard on a car and you'll get real force in the steering.

Remember too that in motion, the steering damper, damping of the damper, and the design of the power steering box will try to lock the steering up and you'll get bump steer as the suspension fights the steering. But there's very little force to fight the steering in a leaf car.

Hope that makes sense.

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

Jump to:  


Who is online

Users browsing this forum: Google [Bot] and 33 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours