| Author |
Message |
Jack jr
Joined: Mon Jul 08, 2019 9:57 am Posts: 198
Vehicle: Suzuki sierras
|
 Posted: Sat Oct 26, 2019 8:41 am |
|
|
G'day you can't get air lockers for 1l axles can you? if not will nt 1.3 axles bolt straight into a 1l? Cheers Jack
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13007 Location: Melbourne
|
 Posted: Sat Oct 26, 2019 8:58 am |
|
|
No and no almost sort of.
You can get auto lockers for 1.0 axles.
To swap to 1.3 axles you’ll need u bolts, spring plates, and a way of sorting driveshaft or transfer flanges. It’s worthwhile if you go WT, not really worth it if you stay narrow track.
|
|
|
|
 |
Jack jr
Joined: Mon Jul 08, 2019 9:57 am Posts: 198
Vehicle: Suzuki sierras
|
 Posted: Sat Oct 26, 2019 1:45 pm |
|
|
thanks steve why is wt worth it but nt not?
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13007 Location: Melbourne
|
 Posted: Sat Oct 26, 2019 3:49 pm |
|
|
Because the cost and work to do the job is basically the same for WT or NT, but NT axles have less aftermarket support, and you don't gain the stability, tyre clearance or steering clearance that WT axles offer.
When my car still had 1.0 axles under it I welded the rear and put 1.3 NT front axles in it. It ran fine like that with 34" tyres on it until I went to WT sierra axles.
if you have the budget to go to airlocker(s) go WT, 26 spline front and rear lockers both front and rear.
|
|
|
|
 |
Jack jr
Joined: Mon Jul 08, 2019 9:57 am Posts: 198
Vehicle: Suzuki sierras
|
 Posted: Sat Oct 26, 2019 4:01 pm |
|
|
will wt housings be more likely to bend under a nt? and would standard nt axles snap with 30/31s and lockers? thanks for all the help Cheers Jack
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13007 Location: Melbourne
|
 Posted: Sat Oct 26, 2019 4:21 pm |
|
|
No. jumping the car, especially in sand, will bend front housings. It's otherwise not a significant problem.
Rear won't be a problem up to about 33" tyres, but it's definitely possible to break a front CV with 31's and lockers. It's not uncommon. there are no off the shelf NT 26 spline inner axles to work wth aftermarket cromo CV's.
31's will be all over your inner guards and shock mounts if you stay narrow track.
|
|
|
|
 |
Jack jr
Joined: Mon Jul 08, 2019 9:57 am Posts: 198
Vehicle: Suzuki sierras
|
 Posted: Sat Oct 26, 2019 5:08 pm |
|
|
could you run 700 16s on a nt
|
|
|
|
 |
Jack jr
Joined: Mon Jul 08, 2019 9:57 am Posts: 198
Vehicle: Suzuki sierras
|
 Posted: Sat Oct 26, 2019 5:16 pm |
|
|
when putting 1.3 axles in can you put reduction gears in a 1l transfer case or do you have to swap to a 1.3 transfer as well? Cheers Jack.
|
|
|
|
 |
MrRocky
Joined: Thu Dec 17, 2009 10:30 pm Posts: 4731 Location: perth
|
 Posted: Sat Oct 26, 2019 8:06 pm |
|
|
|
 |
sideways

az supporter
Joined: Fri Oct 29, 2010 1:53 pm Posts: 5935 Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.
|
 Posted: Sun Oct 27, 2019 10:40 am |
|
|
If it's a light switch 1l transfer then you can fit crawler gears. Most crawlers gears reuse the 1.3l low range output gear so you may have to source one of those. Gears like the 6.4s or 6.5s replace all the gears in the transfer so it doesn't matter there.
If it's a non switched transfer then you're fucked and you've got to swap it out.
|
|
|
|
 |
303zuke

az supporter
Joined: Wed Aug 19, 2009 11:30 pm Posts: 2447
Vehicle: LJ50V, SJ70
|
 Posted: Mon Oct 28, 2019 11:09 pm |
|
|
|
 |
Jack jr
Joined: Mon Jul 08, 2019 9:57 am Posts: 198
Vehicle: Suzuki sierras
|
 Posted: Tue Oct 29, 2019 6:18 pm |
|
|
Whats an auto locker like to live with? I've been reading and they seem to be a love or hate thing. Cheers Jack.
|
|
|
|
 |
Brenno
Joined: Thu Apr 22, 2010 11:30 pm Posts: 996 Location: Hobart
|
 Posted: Tue Oct 29, 2019 8:37 pm |
|
|
|
 |
fordem
Joined: Mon Apr 19, 2010 11:30 pm Posts: 2656 Location: Georgetown, Guyana
Vehicle: APK416, A6G415, A6N415
|
 Posted: Tue Oct 29, 2019 10:27 pm |
|
Jack jr wrote: Whats an auto locker like to live with? I've been reading and they seem to be a love or hate thing. Cheers Jack. Is the car used on road?
|
|
|
|
 |
Jack jr
Joined: Mon Jul 08, 2019 9:57 am Posts: 198
Vehicle: Suzuki sierras
|
 Posted: Wed Oct 30, 2019 3:13 pm |
|
|
|
 |
greenzook89

az supporter
Joined: Sun Sep 06, 2009 11:30 pm Posts: 2591 Location: Ipswich
Vehicle: LJ80V-II, SJ40, SJ40T, RS415
|
 Posted: Thu Oct 31, 2019 9:44 pm |
|
Jack jr wrote: yes it will be. If you drive on road go air, I used to daily my coily with a Spool, then drove my leafy to wheeling with a spool, now I just trailer it to parks and travel in the luxury of a tow car. having a spool/weldy/auto in the rear is cool at first but really gets to you after a while.
_________________ 31zook wrote: Makes me want something similar
|
|
|
|
 |
|