Hey all I have a g16a in my sierra all is going well in the world until I randomly broke a rocker arm, which then did other damage... Love it

. Anyways new cam gear, new cam belt, another rocker arm and camshaft later all is back together. while I was waiting for cam gear i pulled the head and valves and pistons didnt make contact so that was a win.
I have lined everything up.
Flywheel tdc through the timing mark at the gearbox and the pulled the spark plug to confirm yep all is tdc there
tdc on Camshaft via the little mark on the cam gear all good so far, the lobes on the camshaft are facing down in a v pattern to the head
Distributor, pretty close no bolt in it so can move it around
Has fuel via elec fuel pump and weber carby
So far so good right, this is where the awesome begins, there is no bang, at all

, its turning over like there is no spark,
Checked coil yep lots of spark, checked leads yep spark, checked leads with plugs in them spark. There is compression, and with the exhaust manifold off it can see puffs of fuel coming from the exhaust ports.....Need some help i am doing my head in there is a carton of beer or $50 your choice if someone wants to come to Redbank plains to get it running for me.
