ZookiDave wrote:
hey, can anyone offer any advice on how i can get the new fuel pump to fit in my 95 sierra 1.3 carb, it is identical to the original but it just wont go in far enough. is there a trick to this or just real fiddly
please respond asap
cheers
ZUKPWR
Wind the eng over by hand, make sure the ing is OFF, grab the fan blade`s as close to the pulley as you can & turn it to the passenger side, also check that the insulator is not still on the old pump.
Wind in the eng over is just getting the pump lobe of the cam to a different pos....