It is currently Wed Jul 29, 2026 2:04 am
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 11 posts ] 
Author Message

Offline
az supporter
az supporter
User avatar

Joined: Sat Apr 30, 2011 6:02 am
Posts: 38
Location: Whyalla

Post Posted: Fri Dec 02, 2011 4:56 am 
Reply with quote Top  
G'day

Just after some help in what part of the diff you belive to have failed.
Video has full details

http://www.youtube.com/watch?v=F0dGHvQPigg&sns=em


Cheers
Liam

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 4003
Location: Brisbane

Post Posted: Fri Dec 02, 2011 4:59 am 
Reply with quote Top  
Well I would pull the axles out, then remove the diff and then we will all know. :-)
I'm beting side / spider gears or pinion gear or crown wheel. :-) ooh could be bearing. That's about all that is in there so I must win.

_________________
[quote="royce"] I wouldnt mind insulating my rear

 Profile  

Offline
I live here!
I live here!
User avatar

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Post Posted: Fri Dec 02, 2011 5:34 am 
Reply with quote Top  
Spider gears are fine. Run the car in gear (2WD) up on the axle stands and stick ya head under (with or without camera) and tell us where the noise is coming from.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Apr 30, 2011 6:02 am
Posts: 38
Location: Whyalla

Post Posted: Fri Dec 02, 2011 6:02 am 
Reply with quote Top  
The noise is coming from the diff pumpkin and towards the end of the passenger side axle tube.

 Profile  

Offline
I live here!
I live here!
User avatar

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Post Posted: Fri Dec 02, 2011 6:03 am 
Reply with quote Top  
Pull it out and have a look then. If it's damaged then you gotta get it out anyway

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Post Posted: Fri Dec 02, 2011 7:12 am 
Reply with quote Top  
Carrier bearings

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

 Profile  

Offline
User avatar

Joined: Sat May 10, 2008 11:30 pm
Posts: 3273
Location: melbourne

Post Posted: Fri Dec 02, 2011 7:56 am 
Reply with quote Top  
zooky08 wrote:
Carrier bearings


ahhhh.....no.



That is 1.03 minutes I will never get back........ :roll:




Pull things apart and it will be obvious what is wrong.

_________________
builder of custom road legal zooks......and stuff.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 4003
Location: Brisbane

Post Posted: Fri Dec 02, 2011 8:00 am 
Reply with quote Top  
joeblow wrote:
zooky08 wrote:
Carrier bearings


ahhhh.....no.



That is 1.03 minutes I will never get back........ :roll:




Pull things apart and it will be obvious what is wrong.


That's what I was trying to say :wink:

_________________
[quote="royce"] I wouldnt mind insulating my rear

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Post Posted: Fri Dec 02, 2011 11:01 am 
Reply with quote Top  
I didn't even watch the clip :lol:

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Apr 17, 2010 11:30 pm
Posts: 1588
Location: Gracemere, QLD
Vehicle: '94 suzuki maruti

Post Posted: Fri Dec 02, 2011 8:38 pm 
Reply with quote Top  
when both wheels are in the air and the cars in gear and you have an open centre (no locker), when you spin one wheel the other should spin the opposite direction.

liamhh wrote:
The noise is coming from the diff pumpkin and towards the end of the passenger side axle tube.


have you checked wheel bearings?. while the cars on the stands still with the wheel in the air, grab both the top and bottom of the wheel and try to wiggle it , see how much play it has...

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Apr 30, 2011 6:02 am
Posts: 38
Location: Whyalla

Post Posted: Sat Dec 03, 2011 1:45 am 
Reply with quote Top  
Found the problem, diffs fine it's a stuffed wheel bearing making all the noise. My moment of stupidity wandering why my wheels wear spinning of the ground in gear. Should of done the bearing when I replaced the axle seals.

Thanks for the help

Cheers
Liam

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

Jump to:  


Who is online

Users browsing this forum: Google [Bot] and 61 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours