| Author |
Message |
skitzlux
Joined: Sun Jun 07, 2009 11:30 pm Posts: 301 Location: bris
|
 Posted: Wed Feb 24, 2010 1:31 am |
|
|
im wanting to know what i will need to put the wt dash into my narrow track do i need a new wiring harness for it aswel and if there are any other things i need thanks in advance
and i know i need the dash
|
|
|
|
 |
want33s

az supporter
Joined: Fri Nov 16, 2007 10:30 pm Posts: 8135 Location: Sunshine Coast Qld
|
 Posted: Wed Feb 24, 2010 1:53 am |
|
You need a WT dash and you'll also need an NT car...........
All mounts, heater etc is same but you will need at least a WT under dash loom or preferably the entire WT loom... The under dash loom plugs into the rest of the wiring behind the glovebox.
|
|
|
|
 |
ZookiMonsta
Joined: Sun Aug 23, 2009 11:30 pm Posts: 1625 Location: Jimboomba
|
 Posted: Wed Feb 24, 2010 3:39 am |
|
|
Sounds pretty easy, I replaced a 1L dash with a NT. It
took a lil more than NT - WT.
_________________ Own a weird looking coily sh!tbox!
|
|
|
|
 |
bazook

az supporter
Joined: Sat Jul 12, 2008 11:30 pm Posts: 1082 Location: brisbane logan
|
 Posted: Wed Feb 24, 2010 6:37 am |
|
|
i think you need the wiring harness to i think from the wt
|
|
|
|
 |
ninjadaniel
Joined: Sun Jun 07, 2009 11:30 pm Posts: 365 Location: Brisbane
|
 Posted: Wed Feb 24, 2010 1:25 pm |
|
i just did this in my car, the NT loom is nearly the same as the WT but the plugs are different, you can put the NT loom in behind the WT dash but you will need to remove the backing from the speedo cluster and place it on the back of the WT dash (a few little plastic knobs need to be cut off) then all your gauges will work!.
Alternatively if you are doing what i did and swapping an entire engine conversion, wiring & dash over... its a VERY simple job. You will also need the steel bar that sits behind the dash as it has different mounts, steering collumn is the same and should fit, you may need to remove steering wheel and drop the collumn down/out to make the job easier for you.
ABC auto gear currently have a WT soft top with dash & steer bar etc, they quoted me $50 including the wiring.

|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13004 Location: Melbourne
|
 Posted: Wed Feb 24, 2010 10:12 pm |
|
|
I can't add any tech to this thread (except that it's not that hard) but why on earth would anyone want to put the WT dash in a NT? The NT dash is miles more attractive (its less bulky and the three centre round vents are awesome for mounting gauges) and practical with the removable radio pod slung under it.
I could imagine wanting to go from WT to NT or from WT to coil, but I wouldn't put a WT dash in anything.
Steve.
|
|
|
|
 |
skitzlux
Joined: Sun Jun 07, 2009 11:30 pm Posts: 301 Location: bris
|
 Posted: Thu Feb 25, 2010 2:19 am |
|
|
ive just got the old steel dash with the cluster there i just wanna get a newer dash for it so my girlfriend feels like shes in a newer car not a old shit tin
|
|
|
|
 |
want33s

az supporter
Joined: Fri Nov 16, 2007 10:30 pm Posts: 8135 Location: Sunshine Coast Qld
|
 Posted: Thu Feb 25, 2010 3:40 am |
|
skitzlux wrote: ive just got the old steel dash with the cluster there i just wanna get a newer dash for it so my girlfriend feels like shes in a newer car not a old shit tin
OH KAY THEN...
You never said that before... Steel dash is 1.0 litre and is a whole different story to 1.3 NT or WT.
|
|
|
|
 |
skitzlux
Joined: Sun Jun 07, 2009 11:30 pm Posts: 301 Location: bris
|
 Posted: Thu Feb 25, 2010 11:22 pm |
|
|
my mistake well yeh i have a steel dash and want something newer to put in it is it a mission to do or should they bolt up
|
|
|
|
 |
want33s

az supporter
Joined: Fri Nov 16, 2007 10:30 pm Posts: 8135 Location: Sunshine Coast Qld
|
 Posted: Fri Feb 26, 2010 12:23 am |
|
|
Steel dash, IE 1.0 litre, is welded in and is a big job to convert to 1.3 dash but not impossible if you have the skills.
|
|
|
|
 |
bogfrog

az supporter
Joined: Mon Dec 29, 2008 10:30 pm Posts: 596 Location: Mt Evelyn Vic
|
 Posted: Fri Feb 26, 2010 3:04 am |
|
Steel Dashes Rock!
Why would you bother? just throw in a Tacho on the top right hand side and you can mount as many gauges as you want right along the whole face of the rest of the dash all the way to the passenger side if you want? 
_________________ Bitumen...Another waste of public funds!
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9715 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Fri Feb 26, 2010 5:54 pm |
|
Does a newer dash make a car new?
Tell her to get a tit job and a facelift. Then she will be newer.. 
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
skitzlux
Joined: Sun Jun 07, 2009 11:30 pm Posts: 301 Location: bris
|
 Posted: Sun Feb 28, 2010 1:04 am |
|
|
shes bought me this seirra and the one before it and i want to make it a bit nicer for her cos shes bought me the locker and axels helped me with the rest of putting it all together shes done so much and its the one thing she wants changed
this is my missus i dont think shes needs a boob job or face lift
You do not have the required permissions to view the files attached to this post.
|
|
|
|
 |
MrRocky
Joined: Thu Dec 17, 2009 10:30 pm Posts: 4731 Location: perth
|
 Posted: Sun Feb 28, 2010 1:43 am |
|
skitzlux wrote: this is my missus i dont think shes needs a boob job or face lift
Need more pics to cum to a conclusion on that one, preferably with less clothes and more zooom  oh yeah
_________________ ...
|
|
|
|
 |
foolsp33d
Joined: Tue Mar 11, 2008 10:30 pm Posts: 2123 Location: Deep Inside Jamies Mouth
Vehicle: Clown Car..
|
 Posted: Sun Feb 28, 2010 2:31 am |
|
I must not type explicit comments, I must not type explicit comments I must not type explicit comments I must type some explicit comments..
just like a zook im sure its even better with the top off
fwiw My missus has a steel dash in the HT to,im considering covering it with fun fur for her  *flame suit is on and prepped*
**not to this extent thou!

_________________ Roads... Where we're going we dont need Roads....
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13004 Location: Melbourne
|
 Posted: Sun Feb 28, 2010 11:57 pm |
|
|
Swapping out the steel dash will be an enormous PITA. The big problem is that everything behind the dash is different because the relationship between the steering column and pedals is different with the steel dash cars because they have unboosted brakes.
Also, the heater box won't swap because the tunnel is a different size.... it just goes on and on.
Steve.
|
|
|
|
 |
|