It is currently Fri Jul 31, 2026 2:56 pm
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 10 posts ] 
Author Message

Offline

Joined: Fri Feb 25, 2011 9:28 am
Posts: 12
Location: Warragamba NSW

Post Posted: Sat Mar 19, 2011 11:00 pm 
Reply with quote Top  
Hoping someone in auszookers world can help us with aproblem with our sj50 nt Sierra. We recently installed new heavy duty 2" lift springs and shocks in the car and put all new wheels and tyres on it (15x7 sunnies)
we have the car back on the ground and for some reason the drivers sideis currently sitting 1" lower than the passengers side. Can anyone point us in the direction that could be causing this?

 Profile  

Offline
User avatar

Joined: Thu Apr 26, 2007 11:30 pm
Posts: 282
Location: Sydney

Post Posted: Sat Mar 19, 2011 11:05 pm 
Reply with quote Top  
Did you fit springs to correct sides , drivers side will be higher than passenger , as they assume there will be a driver only most of the time , Cheers Paul.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Aug 07, 2009 11:30 pm
Posts: 3159
Location: gold coast

Post Posted: Sat Mar 19, 2011 11:06 pm 
Reply with quote Top  
is it the same front and rear or does it lean down to one corner?

was it like that,straight away or sagged over a period of time?

_________________
http://auszookers.com/index.php?name=Forums&file=v

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Post Posted: Sat Mar 19, 2011 11:33 pm 
Reply with quote Top  
Check the numbers on the springs, see if there is a different letter on one pair.
Like MART said, they assume it is only the driver most of the time in the car, because no one else would be seen dead in a Sierra.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Post Posted: Sat Mar 19, 2011 11:43 pm 
Reply with quote Top  
Yep. Left and a right side spring.

I would be caught dead in a sierra..

_________________
BlueSuzy wrote:
I'm over the G16b's.

 Profile  

Offline

Joined: Fri Feb 25, 2011 9:28 am
Posts: 12
Location: Warragamba NSW

Post Posted: Sun Mar 20, 2011 9:40 am 
Reply with quote Top  
MART (paul)
Both front springs are marked "SUZI 5L-F" and Rear marked "SUZI 4+1R-RH & LH" and in the right spots. We assume front ones are in right position as well.
89 Tin top
Yes it is the same front & back. When springs were fitted everything was OK after driving out the drive way and back in, drivers side now 20mm lower both front and back.
lump-a-charcoal (see MART)
BlueSuzy - only way to be (in a sierra)

 Profile  

Offline
User avatar

Joined: Sun Mar 22, 2009 10:30 pm
Posts: 1273
Location: Whangarei,N.Z.

Post Posted: Sun Mar 20, 2011 6:50 pm 
Reply with quote Top  
Try swapping front springs maybe? If that doesn't work I'd look at adding a leaf to the drivers side. :wink:

 Profile  

Offline

Joined: Fri Feb 25, 2011 9:28 am
Posts: 12
Location: Warragamba NSW

Post Posted: Mon Mar 21, 2011 6:13 am 
Reply with quote Top  
Don't know if any of this helps. We measured the height from the floor to the bottom centre of our wheel arches with the old springs and wheels and tyres on it. We are guessing the old springs were the original standard items as they had 3 leaves front and 3 leaves rear, the new ones are 5 all round. The old tyres were Khumo AT 205 70/15 on 15x5.5 rims. The new tyres are Yokohama Geolander 205 70/15 on 15x7 rims.
The measurements are as follows
Passengers front 734 -> 805
Passengers rear 780 -> 845
Drivers front 732 -> 800
Drivers rear 780 -> 845
so at the time we lowered it off the stands with the new rims it was pretty close to level (with a 2" spring and shock lift)
Now the Drivers side has dropped front 790 rear 830. The passengers side is identical to when it was first dropped.
A photo of the car is attached to this post.


You do not have the required permissions to view the files attached to this post.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Post Posted: Mon Mar 21, 2011 8:06 am 
Reply with quote Top  
If You have a difflock, or LSD, springs can wind up on tight turns.
It may go down again after driving.

If springs came from OverSeas, they could be wrong sides for our zooks.
Time may get them all softened up,
and could be fine after being used well.

christover

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

 Profile  

Offline

Joined: Fri Feb 25, 2011 9:28 am
Posts: 12
Location: Warragamba NSW

Post Posted: Mon Mar 21, 2011 9:22 am 
Reply with quote Top  
No worries. Thanks for all your input. As we won't be registering for a while, we'll leave it and see if it beds down.

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 365 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours