| Author |
Message |
TryHard
Joined: Thu May 13, 2010 1:49 am Posts: 1041 Location: Perth
|
 Posted: Wed Apr 13, 2011 9:05 am |
|
ok well now that my car will be duel locked soon .. and my trans/gearbox / difs are full of water i am going to change all the oils ... now my question is does anyone know a good oil what do u use.. iv been useing some brand called Nulon .. i think its a pritty cheap brand any sugestion to what is best thanks 
|
|
|
|
 |
bohuler

az supporter
Joined: Wed Nov 10, 2010 9:18 am Posts: 1376 Location: Avonsleigh, Victoria
|
 Posted: Wed Apr 13, 2011 9:10 am |
|
with a locker you want to use a lim slip oil, personally i used penrite lim slip, i think its and 80/90, but seeing i have an open atm, havn't used it for about 3 years 
_________________ Life's short, fiddle with your willy while you can
|
|
|
|
 |
CairnsZook

az supporter
Joined: Tue Jul 18, 2006 11:30 pm Posts: 872 Location: West Coast
Vehicle: Zookless
|
 Posted: Wed Apr 13, 2011 9:10 am |
|
The brand of oil won't matter if you don't put breathers on your diffs, g-box and t-case...
They'll just fill up with water again 
|
|
|
|
 |
TryHard
Joined: Thu May 13, 2010 1:49 am Posts: 1041 Location: Perth
|
 Posted: Wed Apr 13, 2011 9:55 am |
|
CairnsZook wrote: The brand of oil won't matter if you don't put breathers on your diffs, g-box and t-case... They'll just fill up with water again 
haha yer thats a must do haha 
|
|
|
|
 |
TryHard
Joined: Thu May 13, 2010 1:49 am Posts: 1041 Location: Perth
|
 Posted: Wed Apr 13, 2011 9:55 am |
|
bohuler wrote: with a locker you want to use a lim slip oil, personally i used penrite lim slip, i think its and 80/90, but seeing i have an open atm, havn't used it for about 3 years 
tought so  thanks wasnt sure if i should use lim slip oil ..  .. what about gear box trans ?
|
|
|
|
 |
swifty_ano
Joined: Tue Jun 29, 2010 4:17 am Posts: 1664 Location: Brisbane, QLD
|
 Posted: Wed Apr 13, 2011 10:06 am |
|
|
Can you use Lim Slip in an Open?
|
|
|
|
 |
boostedbrick

az supporter
Joined: Tue Jun 29, 2010 7:44 am Posts: 2003 Location: Brisbane
Vehicle: 2018 DMAX
|
 Posted: Wed Apr 13, 2011 10:09 am |
|
TryHard wrote: bohuler wrote: with a locker you want to use a lim slip oil, personally i used penrite lim slip, i think its and 80/90, but seeing i have an open atm, havn't used it for about 3 years  tought so  thanks wasnt sure if i should use lim slip oil ..  .. what about gear box trans ?
Dont use lim slip... I change my oils so often that i use the cheapest 80/90 i can find... Whice nowdays is that Repco 5ltr stuff for gearbox/transfer and castrol lim slip for diffs..
|
|
|
|
 |
mnemonix

az supporter
Joined: Sun Aug 16, 2009 11:30 pm Posts: 1409 Location: Newcastle NSW
Vehicle: '96 LWB trayback
|
 Posted: Wed Apr 13, 2011 10:12 am |
|
|
I use the same Penrite Hypoid 80w-90 in diffs/gearbox/transfer. Never had an issue.
_________________ Twin charged twin cam twin locked webwheeler
|
|
|
|
 |
CairnsZook

az supporter
Joined: Tue Jul 18, 2006 11:30 pm Posts: 872 Location: West Coast
Vehicle: Zookless
|
 Posted: Wed Apr 13, 2011 10:31 am |
|
boostedbrick wrote: ... I change my oils so often that i use the cheapest 80/90 i can find...
Exactly
Using an expensive oil and thinking it will last longer is a false economy. Especially if it becomes contaminated with water/mud/grit/sand/whatever.
Fit breathers and change your lube oils regularly and the internal parts and seals will all last significantly longer.
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Wed Apr 13, 2011 11:21 am |
|
|
there was a thread a while back with info on using an oil with the right GL number for the box, you need one that is GL4 for the box and GL5 for the rest, so you dont toast teh syncros
|
|
|
|
 |
Taylor74
Joined: Fri Dec 24, 2010 10:26 am Posts: 198 Location: Perth WA
|
 Posted: Wed Apr 13, 2011 11:47 am |
|
|
Just make sure you use a 75w80 or castrol vmx 80 in your gear box. The syncros will work much better if you do. The rest 80w90 as cheep as you can get
_________________ Suzuki is my way of life.
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Wed Apr 13, 2011 5:40 pm |
|
royce wrote: there was a thread a while back with info on using an oil with the right GL number for the box, you need one that is GL4 for the box and GL5 for the rest, so you dont toast teh syncros
Castrol EPX80W90 is GL5 rated but designed for transaxle gearboxes, so can be used for synchros too
|
|
|
|
 |
zuk85
Joined: Sun Jul 05, 2009 11:30 pm Posts: 656 Location: Sunshine coast
Vehicle: 07 vvt jimny
|
 Posted: Wed Apr 13, 2011 6:31 pm |
|
Taylor74 wrote: Just make sure you use a 75w80 or castrol vmx 80 in your gear box. The syncros will work much better if you do. The rest 80w90 as cheep as you can get
i can vouch for this stuff just put it in my jimny and the shifting it sooooo much easier cant believe the difference it made.
_________________ sorry CHOP
Jimny's Are taking Over
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Wed Apr 13, 2011 10:09 pm |
|
zuk85 wrote: Taylor74 wrote: Just make sure you use a 75w80 or castrol vmx 80 in your gear box. The syncros will work much better if you do. The rest 80w90 as cheep as you can get i can vouch for this stuff just put it in my jimny and the shifting it sooooo much easier cant believe the difference it made.
Did you use the VMX80?
|
|
|
|
 |
swifty_ano
Joined: Tue Jun 29, 2010 4:17 am Posts: 1664 Location: Brisbane, QLD
|
 Posted: Thu Apr 14, 2011 6:18 am |
|
|
Ok sorry for the hijack.
When I bought my car I got given 2L of "castrol rear axle LSX90" oil.
Is this sustable for a 1996 vitara with open diffs?
Is 2l enough?
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Thu Apr 14, 2011 6:27 am |
|
|
The LS means Limited Slip, so your oil is designed for a limited slip diff. Having said that, it won't adversely effect the diff, and being a 90W is about right
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Thu Apr 14, 2011 6:33 am |
|
|
ive go that in mine, 2l will do the rear diff easy enough
|
|
|
|
 |
swifty_ano
Joined: Tue Jun 29, 2010 4:17 am Posts: 1664 Location: Brisbane, QLD
|
 Posted: Thu Apr 14, 2011 6:37 am |
|
|
Yeah it says Limited slip on the bottle... Don't wanna let it go to waste.
So roughly 2l per diff?
Thanks fellas!
|
|
|
|
 |
swifty_ano
Joined: Tue Jun 29, 2010 4:17 am Posts: 1664 Location: Brisbane, QLD
|
 Posted: Thu Apr 14, 2011 6:38 am |
|
|
Can I use it in my front?
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Thu Apr 14, 2011 7:18 am |
|
swifty_ano wrote: Can I use it in my front?
Yep
|
|
|
|
 |
|