[Bennyzarb]

Hayy people I have a 92 Sierra with 31s extended shackles and 2in lifted ome springs I am after a 2 in body lift where can I get some should I make them and what do I need to do it
Do I need to adjust steering arm or not

[Gwagensteve]

Just buy one from Just Cruzin:

http://www.auszookers.com/index.php?nam ... ic&t=15518

You can't make one without a lathe - socket bolts have to be fabricated.

Steve.

[Bennyzarb]

Yea I am a panel beater and can get everything from work but not shaw if I should I am a bit lazy and I would just like to buy them and do the body lift at work will I need to make a steel spacer for the steering shaft

[steak_knife]

Bennyzarb wrote:

Yea I am a panel beater and can get everything from work but not shaw if I should I am a bit lazy and I would just like to buy them and do the body lift at work will I need to make a steel spacer for the steering shaft

Not with the kit from the link above, has a new thicker rag joint in it..

[Bennyzarb]

Ahh ok

[Gwagensteve]

I've installed HEAPS of sierra BL's (used to make them when I had access to a lathe) and never needed a steering spacer at 2" BL.

To clarify, Bennyzarb, you have to bore out and tap a thread into 16mm bolt creating a socket bolt. Just Cruzin's are very nicely made, and the cost of his kit is low enough that making the bolts yourself doesn't make any sense.

Steve.

[Bennyzarb]

Ahh ok I spoke to my local wrecker and they make body lifts for sierras and want $800 installed they said they make the blocks out of 50 mm steel and bend the shifter and put a longer steering shaft in out of an older Suzuki but the just cruzin one sounds better cause I get to keep $600 for some transfer gears what do youse think of this body lift they make?

[steak_knife]

Bennyzarb wrote:

Ahh ok I spoke to my local wrecker and they make body lifts for sierras and want $800 installed they said they make the blocks out of 50 mm steel and bend the shifter and put a longer steering shaft in out of an older Suzuki but the just cruzin one sounds better cause I get to keep $600 for some transfer gears what do youse think of this body lift they make?

I'm not a fan of body lift, but his are top shelf, if I had to lift I'd use his...

[jimbo_jones]

Ive used Just Cruzin's body lift kit and can say its top knotch

[Bennyzarb]

Ahh ok