| Author |
Message |
dave91
Joined: Sun Mar 27, 2011 11:37 pm Posts: 411 Location: Brisbane
|
 Posted: Mon Jun 27, 2011 12:09 am |
|
Just wanting to know if its possible to cut the 'high part' off a high top? I'm guessing that the frame runs through there so i wouldnt be able to, but just wondering
Dave
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Mon Jun 27, 2011 12:12 am |
|
|
I wouldnt.
You could possibly cut it off and reweld a normal top, but way too much work.
It would be easier to do a straight full body swap.
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
want33s

az supporter
Joined: Fri Nov 16, 2007 10:30 pm Posts: 8134 Location: Sunshine Coast Qld
|
 Posted: Mon Jun 27, 2011 12:43 am |
|
|
Removing the roof skin from a Hitop and replacing with a tintop is possible but is a lot more work than cutting the whole turret through the pillars.
|
|
|
|
 |
RIKSTR

az supporter
Joined: Sun Apr 26, 2009 11:30 pm Posts: 1278 Location: Canberra
|
 Posted: Mon Jun 27, 2011 1:13 am |
|
|
What are you trying to achive?
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Mon Jun 27, 2011 1:17 am |
|
A low top 
_________________ I want my old sig back 
|
|
|
|
 |
Fatzook

az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
 Posted: Mon Jun 27, 2011 2:08 am |
|
Dave,
Just live with it. The hi-tops are quirky, but cool IMO. And they make it easier to get a couple 6' tall blonde supermodels in the back 
_________________ 2013 GV 1998 SV420 ute
|
|
|
|
 |
tanshi

az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
 Posted: Mon Jun 27, 2011 2:10 am |
|
Fatzook wrote: Dave, Just live with it. The hi-tops are quirky, but cool IMO. And they make it easier to get a couple 6' tall blonde supermodels in the back 
or just soft top it 
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13007 Location: Melbourne
|
 Posted: Mon Jun 27, 2011 2:31 am |
|
|
At which point you'd still want to do a body swap. Cut the roof off a hardtop and the body gets VERY floppy. There's a lot more strength in a soft top tub around the cowl and B pillar.
There's no way to low-roof a high-roof without cutting up another tub - much easier to do a body swap.
Steve.
|
|
|
|
 |
nato78

az supporter
Joined: Fri Apr 09, 2010 11:30 pm Posts: 1504 Location: Auckland, NZ
Vehicle: Yamaha scooter, 50cc
|
 Posted: Mon Jun 27, 2011 3:35 am |
|
|
Leave it high, otherwise you just have another hardtop or soft top. Modified hightops are rare, so you will have something a bit unique
|
|
|
|
 |
2stroker
Joined: Sun Sep 07, 2008 11:30 pm Posts: 2689 Location: North Brisbane
|
 Posted: Mon Jun 27, 2011 5:36 am |
|
nato78 wrote: Leave it high, otherwise you just have another hardtop or soft top. Modified hightops are rare, so you will have something a bit unique
Thank goodness
|
|
|
|
 |
dave91
Joined: Sun Mar 27, 2011 11:37 pm Posts: 411 Location: Brisbane
|
 Posted: Mon Jun 27, 2011 6:43 am |
|
|
_________________ Every problem can be solved with a Ratchet.
|
|
|
|
 |
tanshi

az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
 Posted: Mon Jun 27, 2011 6:48 am |
|
|
the owner was on here for a while.
he bought my lockright to put in it.
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Mon Jun 27, 2011 6:54 am |
|
|
I'd be a bit worried about a Sierra with 2 Million kms on the clock...
_________________ I want my old sig back 
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Mon Jun 27, 2011 6:57 am |
|
|
thats Mr_Ron's Hightop
_________________ You're just hating because you don't understand
|
|
|
|
 |
dave91
Joined: Sun Mar 27, 2011 11:37 pm Posts: 411 Location: Brisbane
|
 Posted: Mon Jun 27, 2011 7:04 am |
|
|
is it any good??
_________________ Every problem can be solved with a Ratchet.
|
|
|
|
 |
shep
Joined: Thu Mar 29, 2007 11:30 pm Posts: 14498 Location: Here there everywhere
Vehicle: A manly awesome man jimny
|
 Posted: Mon Jun 27, 2011 7:12 am |
|
dave91 wrote: is it any good??
has aircon 
_________________ JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP
|
|
|
|
 |
dave91
Joined: Sun Mar 27, 2011 11:37 pm Posts: 411 Location: Brisbane
|
 Posted: Mon Jun 27, 2011 7:21 am |
|
|
thats a plus, but i cant picture a sierra's power output with the a/c turned on bahahaha
how hard is it to fix rust?
_________________ Every problem can be solved with a Ratchet.
|
|
|
|
 |
ajsr

az supporter
Joined: Sun Dec 28, 2008 10:30 pm Posts: 3712 Location: melb
|
 Posted: Mon Jun 27, 2011 7:23 am |
|
|
hitops are the coolest model made by a 1000%
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Mon Jun 27, 2011 7:37 am |
|
ajsr wrote: hitops are the coolest model made by a 1000%
As long as they don't have the ugly square headlights and the wrong badge

_________________ I want my old sig back 
|
|
|
|
 |
jonno_racing

az supporter
Joined: Wed Apr 15, 2009 11:30 pm Posts: 8164 Location: Tassie
Vehicle: suzuki
|
 Posted: Mon Jun 27, 2011 7:40 am |
|
|
a guy i used to wheel with back when i was like 18 had a well set up high top with a shelf up the top for sleeping bags and stuff... was cool.
_________________ Do cool stuff, Put it on the internet Sierra build, Jimny build https://www.youtube.com/user/redzook1
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Mon Jun 27, 2011 7:43 am |
|
tanshi wrote: Fatzook wrote: Dave, Just live with it. The hi-tops are quirky, but cool IMO. And they make it easier to get a couple 6' tall blonde supermodels in the back  or just soft top it 
I seem to remember a certain high top to soft top conversion that went horribly wrong. Just keep it a high top if you buy it
|
|
|
|
 |
shep
Joined: Thu Mar 29, 2007 11:30 pm Posts: 14498 Location: Here there everywhere
Vehicle: A manly awesome man jimny
|
 Posted: Mon Jun 27, 2011 7:45 am |
|
Scrawn wrote: tanshi wrote: Fatzook wrote: Dave, Just live with it. The hi-tops are quirky, but cool IMO. And they make it easier to get a couple 6' tall blonde supermodels in the back  or just soft top it  I seem to remember a certain high top to soft top conversion that went horribly wrong. Just keep it a high top if you buy it
was that the islandvitara jobbie
_________________ JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP
|
|
|
|
 |
dave91
Joined: Sun Mar 27, 2011 11:37 pm Posts: 411 Location: Brisbane
|
 Posted: Mon Jun 27, 2011 7:59 am |
|
|
i reckon this one looks pretty tank, but it needs a tfer case and some rust fixed though
_________________ Every problem can be solved with a Ratchet.
|
|
|
|
 |
Fatzook

az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
 Posted: Mon Jun 27, 2011 8:07 am |
|
I like it too! WT diff, transfer and some small rust repairs. Thats a nice short list 
_________________ 2013 GV 1998 SV420 ute
|
|
|
|
 |
ajsr

az supporter
Joined: Sun Dec 28, 2008 10:30 pm Posts: 3712 Location: melb
|
 Posted: Mon Jun 27, 2011 8:11 am |
|
Ben_Sierra wrote: ajsr wrote: hitops are the coolest model made by a 1000% As long as they don't have the ugly square headlights and the wrong badge  
racist 
|
|
|
|
 |
dave91
Joined: Sun Mar 27, 2011 11:37 pm Posts: 411 Location: Brisbane
|
 Posted: Mon Jun 27, 2011 8:11 am |
|
|
is it expensive to repair rust? I've got a few mates who are boilermakers, would they be able to fix this kind of thing, or is a specialised type of job?
_________________ Every problem can be solved with a Ratchet.
|
|
|
|
 |
Fatzook

az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
 Posted: Mon Jun 27, 2011 8:12 am |
|
dave91 wrote: is it expensive to repair rust? I've got a few mates who are boilermakers, would they be able to fix this kind of thing, or is a specialised type of job?
Easy as. Pics of rust? Where is the rust?
_________________ 2013 GV 1998 SV420 ute
|
|
|
|
 |
dave91
Joined: Sun Mar 27, 2011 11:37 pm Posts: 411 Location: Brisbane
|
 Posted: Mon Jun 27, 2011 8:21 am |
|
|
no pics yet but ill get some when i look at it. There's a little spot in the bottom corner of the door and one of the wells, and a spot in the drivers floor
_________________ Every problem can be solved with a Ratchet.
|
|
|
|
 |
Fatzook

az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
 Posted: Mon Jun 27, 2011 8:24 am |
|
|
Doors are easy to replace ( $100 each) If you repair them they will still need paint.
Any floor rust can be repaired so laong as its not in all of the seams.
_________________ 2013 GV 1998 SV420 ute
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Mon Jun 27, 2011 8:26 am |
|
shep wrote: Scrawn wrote: tanshi wrote: Fatzook wrote: Dave, Just live with it. The hi-tops are quirky, but cool IMO. And they make it easier to get a couple 6' tall blonde supermodels in the back  or just soft top it  I seem to remember a certain high top to soft top conversion that went horribly wrong. Just keep it a high top if you buy it was that the islandvitara jobbie
Yep 
|
|
|
|
 |
|