| Author |
Message |
slowsierra
Joined: Sat May 23, 2009 11:30 pm Posts: 415 Location: Greenbank, QLD
Vehicle: 89'SWBsierra&84'LWBsierra
|
 Posted: Tue Jun 28, 2011 7:33 pm |
|
|
hi guys,
i am having a problem with my power steering on my sierra. here are a few details on the setup. i have a '91'sierra with a baleno engine and vitara power steering mounted via a BenT adpt kit. so the problem is it seems to build up resistance as i turn the the wheel to steer then it goes easy then builds again etc this happens a couple of times as go around a corner/turn the steering wheel. i am stumped on the problem. i am thinking of getting new hoses installed just to narrow down the list. i have bleed the system (jacked the front up and turned the wheels from lock to lock a few time). any help will be greatly apprecated.
thanks greg
|
|
|
|
 |
rick1970
Joined: Sun Jul 04, 2010 9:39 pm Posts: 303 Location: Dungowan
|
 Posted: Tue Jun 28, 2011 8:00 pm |
|
|
|
 |
94BAZOOKA
Joined: Mon Jan 17, 2011 8:40 am Posts: 537 Location: central coast NSW
|
 Posted: Tue Jun 28, 2011 8:06 pm |
|
|
Are the lines the right way ?
_________________ F#%ING [P] PLATER
|
|
|
|
 |
hutch

az supporter
Joined: Sun Nov 30, 2008 10:30 pm Posts: 1213 Location: SW Bris
|
 Posted: Tue Jun 28, 2011 8:26 pm |
|
|
what did you do with the steering shaft from the wheel to the PS box? Did you replace it with the coily one? What is the condition of the rag joint?
_________________ 255 characters
|
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Tue Jun 28, 2011 8:37 pm |
|
|
|
 |
want33s

az supporter
Joined: Fri Nov 16, 2007 10:30 pm Posts: 8134 Location: Sunshine Coast Qld
|
 Posted: Tue Jun 28, 2011 8:42 pm |
|
|
Shagged uni's in the steer shaft?
|
|
|
|
 |
31zook
Joined: Tue Mar 24, 2009 10:30 pm Posts: 9242 Location: maito
Vehicle: <3 Edna <3
|
 Posted: Tue Jun 28, 2011 10:51 pm |
|
|
the steering slop adjuster is too tight? Is it when your steering wheel get to one point only or is it all different places on the steering wheel?
|
|
|
|
 |
Hybrid

az supporter
Joined: Mon Apr 21, 2008 11:30 pm Posts: 1095 Location: Bulimba, Brisbane
Vehicle: '92 Sierra
|
 Posted: Tue Jun 28, 2011 11:01 pm |
|
|
x 2 to rubber rag joint or binding uni's. I've had both after doing my PS.
|
|
|
|
 |
oozuk
Joined: Sun Aug 16, 2009 11:30 pm Posts: 1452 Location: bethania QLD
|
 Posted: Tue Jun 28, 2011 11:06 pm |
|
|
Did you bleed he power steering system when you installed it? Could have air still in the system. Does the pump groan when you loose power steering ?
_________________ building a bling zook .......will it ever be finis
|
|
|
|
 |
Jasen
Joined: Wed Apr 21, 2010 11:30 pm Posts: 86 Location: Toowoomba
|
 Posted: Wed Jun 29, 2011 7:45 am |
|
oozuk wrote: Did you bleed he power steering system when you installed it? Could have air still in the system. Does the pump groan when you loose power steering ?
He said he has bled it, but I was thinking the same as u oozuk. When you installed the ps lines - you don't have any lines that go above the reservoir or have high spots where air could still be trapped?
|
|
|
|
 |
slowsierra
Joined: Sat May 23, 2009 11:30 pm Posts: 415 Location: Greenbank, QLD
Vehicle: 89'SWBsierra&84'LWBsierra
|
 Posted: Sun Jul 03, 2011 8:17 pm |
|
you picked it like a dirty nose Want33's. i had a spare steering shaft/uni so it was an easy fix.
thank you all for your input i checked everything else while i was there. and re bleed the system. tested it out at ripleys was going great til my mate blew his CV. when will people learn not every car can follow a sierra 
|
|
|
|
 |
|