| Author |
Message |
CompTruck
Joined: Mon Sep 21, 2009 11:30 pm Posts: 299 Location: brisbane northside
|
 Posted: Wed Jul 06, 2011 10:09 am |
|
|
hi guys. just thinking about what size winch to get for my sierra. few ideas going on.
im thinking about getting a 12000lbs one. my reasoning is incase i have to pull one of the big trucks out of some mud or something. dont wanna be stuck there with a say 6000lbs one to suit my car but no good for others.
|
|
|
|
 |
CompTruck
Joined: Mon Sep 21, 2009 11:30 pm Posts: 299 Location: brisbane northside
|
 Posted: Wed Jul 06, 2011 10:09 am |
|
|
will it weight my front down too much?
|
|
|
|
 |
mongrelzook
Joined: Mon Jun 27, 2011 11:55 am Posts: 144 Location: brisbane
Vehicle: 96 sj70+80 tintop sierra
|
 Posted: Wed Jul 06, 2011 10:19 am |
|
|
Might just pull yours straight to the bigger 4by instead of pulling them out
|
|
|
|
 |
DropBear8
Joined: Tue Oct 19, 2010 12:00 pm Posts: 556 Location: Perth
|
 Posted: Wed Jul 06, 2011 10:26 am |
|
mongrelzook wrote: Might just pull yours straight to the bigger 4by instead of pulling them out
What i was thinking to.
I think they say a safe bet is two times the weight of your own car.
_________________ screwdriver's on ur head impale DropBears 
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13007 Location: Melbourne
|
 Posted: Wed Jul 06, 2011 10:27 am |
|
|
6k is plenty- they are fast and light. 12k winches are big and slow.
I think I'm putting a 9k in mine, but only because I own it, i'd buy a 6k if I was spending my money
Steve
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Wed Jul 06, 2011 10:28 am |
|
|
9000lb
_________________ You're just hating because you don't understand
|
|
|
|
 |
Jasen
Joined: Wed Apr 21, 2010 11:30 pm Posts: 86 Location: Toowoomba
|
 Posted: Wed Jul 06, 2011 10:29 am |
|
Remember, you have a pissy little zook chassis that this winch is going to be connected to. I would rather have a 6000lb (possibly 9000lb at most imo) that'll happily/safely recover ME. I'd rather have my smaller winch run out of power than tearing my front end out tryin to recover a full-size 4wd with a bigger winch.
Just my 2c of course 
|
|
|
|
 |
CompTruck
Joined: Mon Sep 21, 2009 11:30 pm Posts: 299 Location: brisbane northside
|
 Posted: Wed Jul 06, 2011 10:30 am |
|
|
sound reasoning. yer 12000 be too big lol
|
|
|
|
 |
CompTruck
Joined: Mon Sep 21, 2009 11:30 pm Posts: 299 Location: brisbane northside
|
 Posted: Wed Jul 06, 2011 10:31 am |
|
|
how much does a 1990 model sierra weigh? mine would be abit lighter but replaced that weight with bigger tyres and roll cage
|
|
|
|
 |
Fatzook

az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
 Posted: Wed Jul 06, 2011 10:31 am |
|
|
6-8000lb.
_________________ 2013 GV 1998 SV420 ute
|
|
|
|
 |
monley

az supporter
Joined: Wed Nov 24, 2010 7:58 am Posts: 11092 Location: Mandurah.W.A.
Vehicle: 84 LWB NT
|
 Posted: Wed Jul 06, 2011 10:37 am |
|
|
_________________ Tell my arse, he actually gives a crap!
|
|
|
|
 |
zuk_244
Joined: Sun Jun 28, 2009 11:30 pm Posts: 170 Location: Wangaratta, Vic
|
 Posted: Wed Jul 06, 2011 10:40 am |
|
|
12000 would be over kill. id go about a 8000 Tigerz11 just because the 6000 only has 20mtrs of cable and the 8000 has 30mtrs (See KPD4x4 in the auszookers business directory for prices).
If you want to pull out big trucks get yourself a winch extension strap and a snatch block. You hook the extension strap with the snatch block to the Patrol (or whatever) then run your winch rope for your sierra through the snatch block then to a tree. That way halve the load is on the zook and the other half is on the tree. Even better butt the bullbar of the zook upto a tree to so it doesnt just drag you along. (if you have enough trees around)
|
|
|
|
 |
ajsr

az supporter
Joined: Sun Dec 28, 2008 10:30 pm Posts: 3712 Location: melb
|
 Posted: Wed Jul 06, 2011 11:09 am |
|
Gwagensteve wrote: 6k is plenty- they are fast and light. 12k winches are big and slow.
I think I'm putting a 9k in mine, but only because I own it, i'd buy a 6k if I was spending my money
Steve
thought you didn't belive in winches 
|
|
|
|
 |
zooky08

az supporter
Joined: Fri Nov 27, 2009 10:30 pm Posts: 3426 Location: imbil/gympie. qld
Vehicle: 03 Jimny
|
 Posted: Wed Jul 06, 2011 11:13 am |
|
monkey wrote: x3
I would just leave the patrols there 
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13007 Location: Melbourne
|
 Posted: Wed Jul 06, 2011 11:32 am |
|
ajsr wrote: Gwagensteve wrote: 6k is plenty- they are fast and light. 12k winches are big and slow.
I think I'm putting a 9k in mine, but only because I own it, i'd buy a 6k if I was spending my money
Steve thought you didn't belive in winches 
I don't, but it's sitting in the shed... What's a guy to do?
Steve
|
|
|
|
 |
stockman

az supporter
Joined: Thu Nov 05, 2009 10:30 pm Posts: 5319 Location: Canberra
Vehicle: 4wd
|
 Posted: Wed Jul 06, 2011 11:33 am |
|
|
Use it as a paper weight!
_________________ Watch out or you'll get sued.
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Wed Jul 06, 2011 11:53 am |
|
|
Ive always thought bigger was better. I had a 12,000lb winch on my old sierra. didnt weigh that much more that a 9000lb. I used it more times pulling othere unstuck than on myself. Either way a 12000 is hardly gonna struggle on a pissy sierra.
_________________ B4T
Built by me to be driven like a rental
|
|
|
|
 |
nato78

az supporter
Joined: Fri Apr 09, 2010 11:30 pm Posts: 1504 Location: Auckland, NZ
Vehicle: Yamaha scooter, 50cc
|
 Posted: Wed Jul 06, 2011 6:02 pm |
|
|
Got my tradies catalog in the mail today, supercheap has their 9500lb winch on sale again for $315
|
|
|
|
 |
rick1970
Joined: Sun Jul 04, 2010 9:39 pm Posts: 303 Location: Dungowan
|
 Posted: Wed Jul 06, 2011 7:12 pm |
|
The 9000lb Premier winch on the front of my zook seems to do ok. Only went this big as the price was right, ie free 
|
|
|
|
 |
canberramav
Joined: Mon Jun 01, 2009 11:30 pm Posts: 643 Location: Canberra
|
 Posted: Wed Jul 06, 2011 8:02 pm |
|
|
I would get a warn high mount.
Others are mostly painfully slow. Invest in some rope as well to reduce alot of weight.
Warns are basically the pick of the lot and you should get one for around $1000 second hand + or - a bit.
|
|
|
|
 |
TryHard
Joined: Thu May 13, 2010 1:49 am Posts: 1041 Location: Perth
|
 Posted: Thu Jul 07, 2011 12:59 am |
|
anyone know any websites etc places that selll 6000lb winch's thanks 
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Thu Jul 07, 2011 1:07 am |
|
TryHard wrote: anyone know any websites etc places that selll 6000lb winch's thanks 
dank, KPD4x4, AZ business directory
_________________ You're just hating because you don't understand
|
|
|
|
 |
turbo_deo
Joined: Mon Oct 11, 2010 5:14 am Posts: 542 Location: Newcastle
Vehicle: Work van
|
 Posted: Thu Jul 07, 2011 1:18 am |
|
atari4x4 wrote: TryHard wrote: anyone know any websites etc places that selll 6000lb winch's thanks  dank, KPD4x4, AZ business directory
X2 very easy to deal with
_________________ Swb softie spoa cromo front -50 beadlocks 6.5s 
|
|
|
|
 |
mnemonix

az supporter
Joined: Sun Aug 16, 2009 11:30 pm Posts: 1409 Location: Newcastle NSW
Vehicle: '96 LWB trayback
|
 Posted: Thu Jul 07, 2011 2:28 am |
|
|
I had a warn 6000lb on mine for years. a 20year old pig of a thing It was slowww, but it never failed to recover me.
Done well over 100 self recoveries at a guess and always got the job done.
I've recently upgraded to a tigerz 10,000 through Dank. Mainly for the benefits of rope plus a higher retrieve speed under load.
With any winch, make sure your mounts spread the load through the chassis and don't rely on the factory bar mounting points.
|
|
|
|
 |
zooky08

az supporter
Joined: Fri Nov 27, 2009 10:30 pm Posts: 3426 Location: imbil/gympie. qld
Vehicle: 03 Jimny
|
 Posted: Thu Jul 07, 2011 2:35 am |
|
 just got my 9000lb
Dank is great too deal with
Thanks dan
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Thu Jul 07, 2011 2:36 am |
|
Built4thrashing wrote: Ive always thought bigger was better. I had a 12,000lb winch on my old sierra. didnt weigh that much more that a 9000lb. I used it more times pulling othere unstuck than on myself. Either way a 12000 is hardly gonna struggle on a pissy sierra.
No, but if you are truly, properly stuck and you have an overrated winch you're gonna tear a Sierra in half...
_________________ I want my old sig back 
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Thu Jul 07, 2011 7:26 am |
|
Ben_Sierra wrote: Built4thrashing wrote: Ive always thought bigger was better. I had a 12,000lb winch on my old sierra. didnt weigh that much more that a 9000lb. I used it more times pulling others unstuck than on myself. Either way a 12000 is hardly gonna struggle on a pissy sierra. No, but if you are truly, properly stuck and you have an overrated winch you're gonna tear a Sierra in half...
I winched some stupid heavy loads in my sierra where i had to chain myself to a tree and it never did ny chasis damage. 12000lb winch stalled out pulling a submerged 80series out of a river. All it did was bend the tongue on the tow bar. I know a sierra chasis is not very thick but if its mounted properly and not just relying on the 4 holes in the end of the chasis you shouldnt have a problem.

_________________ B4T
Built by me to be driven like a rental
|
|
|
|
 |
ajsr

az supporter
Joined: Sun Dec 28, 2008 10:30 pm Posts: 3712 Location: melb
|
 Posted: Thu Jul 07, 2011 7:27 am |
|
Ben_Sierra wrote: Built4thrashing wrote: Ive always thought bigger was better. I had a 12,000lb winch on my old sierra. didnt weigh that much more that a 9000lb. I used it more times pulling othere unstuck than on myself. Either way a 12000 is hardly gonna struggle on a pissy sierra. No, but if you are truly, properly stuck and you have an overrated winch you're gonna tear a Sierra in half...
what a load of crap ben
|
|
|
|
 |
monley

az supporter
Joined: Wed Nov 24, 2010 7:58 am Posts: 11092 Location: Mandurah.W.A.
Vehicle: 84 LWB NT
|
 Posted: Thu Jul 07, 2011 7:30 am |
|
zooky08 wrote: :woohoo:  just got my 9000lb Dank is great too deal with Thanks dan
I hope mine turns up soon 
_________________ Tell my arse, he actually gives a crap!
|
|
|
|
 |
zooky08

az supporter
Joined: Fri Nov 27, 2009 10:30 pm Posts: 3426 Location: imbil/gympie. qld
Vehicle: 03 Jimny
|
 Posted: Thu Jul 07, 2011 7:46 am |
|
monkey wrote: zooky08 wrote: :woohoo:  just got my 9000lb Dank is great too deal with Thanks dan I hope mine turns up soon  I sent him a pm asking when the winches were ready. Then it turned up today. Not sure when dank sent it, but I wasn't exspecting it so fast. You should get it pretty quick
I even had to test it out, I couldnt wait 
|
|
|
|
 |
|