auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

will they fit ?

Page 1 of 1

[ 17 posts ]

Print view

Previous topic | Next topic

Author

Message

tobeszook

az supporter

Joined: Sun Sep 26, 2010 7:38 am
Posts: 453
Location: Drysdale Vic

Posted: Mon Aug 29, 2011 10:19 am

Hey i have got a coily with a 2''sus and a 2''body lift do you think 32/10.5/r15s will fit ?

ZookFan

Joined: Mon Feb 14, 2011 6:19 am
Posts: 3978
Location: Brisbane,samford,QLD
Vehicle: 92 Sierra Tin Top, 3 X LJ 81's

Posted: Mon Aug 29, 2011 10:20 am

should do

want 33's has a similar set up and he runs 33's :wink:

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Posted: Mon Aug 29, 2011 10:21 am

Yes and no, you'll need some hammering and bumpstop spacing.

Steve

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Mon Aug 29, 2011 10:28 am

This one was in our club a while back.
It ran 31's I think.
gwagensteve would know more detail

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

neofitou

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 1088
Location: Melbourne
Vehicle: 00 Jimny, 63 Haffy

Posted: Mon Aug 29, 2011 10:32 am

Hammertime!

Rusho

Tubby Elfsdong

Joined: Sun Aug 02, 2009 11:30 pm
Posts: 6501
Location: Northside, Brisbane
Vehicle: Coily Sierra

Posted: Mon Aug 29, 2011 10:33 am

I just crammed 31's under my coily with said amount of lift. I reacon I'll be struggling for it not to rub without decent massaging with a hammer and bump stop alterations

_________________
Shep is a closet jimny lover!!!!

tobeszook

az supporter

Joined: Sun Sep 26, 2010 7:38 am
Posts: 453
Location: Drysdale Vic

Posted: Mon Aug 29, 2011 10:44 am

thanks

ZookFan

Joined: Mon Feb 14, 2011 6:19 am
Posts: 3978
Location: Brisbane,samford,QLD
Vehicle: 92 Sierra Tin Top, 3 X LJ 81's

Posted: Mon Aug 29, 2011 10:46 am

Gwagensteve wrote:

Yes and no, you'll need some hammering and bumpstop spacing.

Oh I thought I had forgotten somthing! :oops:

Steve

Bucket

az supporter

Joined: Mon Nov 30, 2009 10:30 pm
Posts: 2191
Location: Vic
Vehicle: SJ50 hardtop!

Posted: Mon Aug 29, 2011 10:56 am

My mate has 31" silverstonea on his coily with 2" sus and 2" body. Clears them nicely. There also on a very deep dished rim

_________________
NT SJ50

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Mon Aug 29, 2011 10:58 am

I has 31's with 2" spring lift. Clears them nicely

_________________
mlm

stockman

az supporter

Joined: Thu Nov 05, 2009 10:30 pm
Posts: 5319
Location: Canberra
Vehicle: 4wd

Posted: Mon Aug 29, 2011 11:00 am

I has 31's with 1.5" spring lift and beat guards. Clears them nicely

_________________
Watch out or you'll get sued.

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Mon Aug 29, 2011 11:02 am

stockman wrote:

I has 31's with 1.5" spring lift and beat guards. Clears them nicely

But your zook fell on it's head

_________________
mlm

zooker

az supporter

Joined: Sun Aug 06, 2006 11:30 pm
Posts: 596
Location: Queanbeyan

Posted: Mon Aug 29, 2011 11:45 am

My old zook. 32x11.5 on 8" rims. Cleared with 2" BL, 2" springs, guards hammered in and front diff moved 22mm forward

_________________
Member of C.O.R 4x4

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Posted: Mon Aug 29, 2011 12:06 pm

You guys aren't helping with the leaf tech. Coilers run a wider axle and different roll centre and scrub radius - they don't fit tyres the same way.

The Red HT with the 'pedes on it ran a custom Koni-based suspension kit, 2" BL, and about 20mm of bumpstop spacing, with hammered seams. Bumper outrigger had to go. Wheels were ROH Trak II on a stock vitara offset, from memory.

I don't know the measurements of 31" 'pedes but it's fair to assume a 32" tyre should be a bit bigger, so bumpstop spacing and more hammering would be required. Wheel offset will be critical.

Steve.

hooki

az supporter

Joined: Mon Jul 21, 2008 11:30 pm
Posts: 1785
Location: perth, WA
Vehicle: 85' LWB Sierra, 01' S15

Posted: Mon Aug 29, 2011 12:47 pm

My old coily - 31's, 2inch spring, 2inch body lift and slight hammering.

The 31's cleared alright but i'd say you will need to so some serious hammering or maybe even some cutting. Gearing wasn't great with the 31's in low but if you sort that out i can't see it being to hard fitting 32's.

_________________
79' LJ80 (sold) :(
95' & 97' sierra (sold)

zooker

az supporter

Joined: Sun Aug 06, 2006 11:30 pm
Posts: 596
Location: Queanbeyan

Posted: Mon Aug 29, 2011 1:01 pm

My bad, missed the coily bit. Good luck with it then :peaceout:

_________________
Member of C.O.R 4x4

tobeszook

az supporter

Joined: Sun Sep 26, 2010 7:38 am
Posts: 453
Location: Drysdale Vic

Posted: Mon Aug 29, 2011 7:53 pm

thanks boys

Page 1 of 1

[ 17 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 69 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum