auszookers.com • View topic - 110amp alt? look here

Board index » Talking About Stuff » Suzuki Talk

110amp alt? look here

Page 1 of 1

[ 11 posts ]

Print view

Previous topic | Next topic

Author

Message

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Mon Oct 10, 2011 5:05 am

ok so i got sick of tightening up my alt belt over the last few months.. and the last time i did it i noticed the alt was on a bit of a angle.

so i decided to pull it out today for a look...

the issue is, the stock alt takes 2 bolts one from either side..
the falcon alt is done with just one..
the bottom bolt was about as tight as you would want it, given that its in a big ally housing, i didn't have to lever on it but some force was defently required.

i have orded a new mount (thanks jas) and will put a crush tube in it to stop the issue in the future..

i will add, i only put this alt in a few months ago! as my old one died from over tightening the bottom bolt :roll:

ironic.

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

buzbox

Joined: Thu Jul 16, 2009 11:30 pm
Posts: 3600
Location: Wollongong NSW
Vehicle: LWB Sierra & XL7

Posted: Mon Oct 10, 2011 5:34 am

It's not that bad.. :lol:

Use a high tensile bolt, that should help too.

_________________
'92 Vitara & Camper trailer

zooky08

az supporter

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Posted: Mon Oct 10, 2011 6:52 am

Was the bolt a tight fit in the hole at the beginning?

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Mon Oct 10, 2011 7:42 am

When I put the 110 alternator in my Sierra,
I never had to touch it again,
no adjustin was ever needed,
I used a Barina water pump, so kept the multi rib belt.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Mon Oct 10, 2011 8:22 am

yeah the mount was drilled out.. to 10mm so the fit was near perfect.

coilers run multi rib from factory

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Mon Oct 10, 2011 8:57 am

jonno_racing wrote:

yeah the mount was drilled out.. to 10mm so the fit was near perfect.

coilers run multi rib from factory

I'm still learning all this modern stuff :lol:

The vit may get a 110 when this one croaks.
Not a lot of room in there tho.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Mon Oct 10, 2011 8:59 am

Just turn the bolt around....

_________________
I used to be indecisive,
now I'm not so sure.....

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Mon Oct 10, 2011 9:13 am

shepped it.

_________________
You're just hating because you don't understand

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Mon Oct 10, 2011 11:17 am

steak_knife wrote:

Just turn the bolt around....

go get under a g13 sierra any will do and tell me why that won't work. not q bad idea tho lol

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

11_evl

Joined: Tue Apr 10, 2007 11:30 pm
Posts: 846
Location: logan reserve, Brisb

Posted: Mon Oct 10, 2011 6:42 pm

i use 2 bolts on the bottom with my falcon alt setup, neva had an issue.
but yes running with one bolt will require a crush tube

_________________
92 sierra, 40" treps, full hydro, F&R steer, 106"W

Jackson

Joined: Mon Apr 04, 2011 5:56 am
Posts: 559
Location: Newcastle
Vehicle: Yellow Ute

Posted: Tue Oct 11, 2011 6:43 am

jonno_racing wrote:

steak_knife wrote:

Just turn the bolt around....

go get under a g13 sierra any will do and tell me why that won't work. not q bad idea tho lol

STEKKY is giving you advice Jonno.

SO

Page 1 of 1

[ 11 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 319 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum