| Author |
Message |
thesupervisor
Joined: Sat Jul 30, 2011 12:14 am Posts: 193 Location: perth
|
 Posted: Mon Nov 07, 2011 8:58 am |
|
|
so i have a 2,5 v6 gv it feels like the spark is breaking down on low rpm not sure how to test the coil pack indervidualy?
and any one know where to get some good priced new ones?
|
|
|
|
 |
bazook

az supporter
Joined: Sat Jul 12, 2008 11:30 pm Posts: 1082 Location: brisbane logan
|
 Posted: Mon Nov 07, 2011 11:45 am |
|
get a spark plug and put the coil on it,make sure you earth out the plug on something on the motor, and also make sure you dont touch the sparky end  turn it over and you should see a nice blue spark if you used a new plug out of the box 
_________________ josh AKA Bazook
|
|
|
|
 |
thesupervisor
Joined: Sat Jul 30, 2011 12:14 am Posts: 193 Location: perth
|
 Posted: Wed Nov 09, 2011 10:48 am |
|
|
|
 |
thesupervisor
Joined: Sat Jul 30, 2011 12:14 am Posts: 193 Location: perth
|
 Posted: Wed Nov 09, 2011 10:51 am |
|
|
|
 |
bazook

az supporter
Joined: Sat Jul 12, 2008 11:30 pm Posts: 1082 Location: brisbane logan
|
 Posted: Wed Nov 09, 2011 10:56 am |
|
|
they look the same
_________________ josh AKA Bazook
|
|
|
|
 |
fordem
Joined: Mon Apr 19, 2010 11:30 pm Posts: 2656 Location: Georgetown, Guyana
Vehicle: APK416, A6G415, A6N415
|
 Posted: Wed Nov 09, 2011 11:20 am |
|
|
Be careful with look the same - Suzuki used two different coil packs which are externally identical, the connector is the way to tell them apart - it can be 2- or 3-pin.
The 2-pin style were used on the early J18's, J20's & H20's, the cut off year was I believe '97 - the 3-pin style is used on the later vesions of the above mentioned engines, the J23's and the H25's & H27's.
The 3-pin coil packs have an ignitor transistor, the 2-pin coils packs are used with a separate ignitor module mounted on the firewall.
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Wed Nov 09, 2011 11:24 am |
|
|
my 97 build j20a runs the later 3 pin
_________________ You're just hating because you don't understand
|
|
|
|
 |
Fatzook

az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
 Posted: Wed Nov 09, 2011 11:25 am |
|
atari4x4 wrote: my 97 build j20a runs the later 3 pin
Same.
_________________ 2013 GV 1998 SV420 ute
|
|
|
|
 |
thesupervisor
Joined: Sat Jul 30, 2011 12:14 am Posts: 193 Location: perth
|
 Posted: Wed Nov 09, 2011 12:20 pm |
|
|
mine are 3 pin 99 model
so is this a good price?
im suprised some smart person hasnt made a replacment from another model thats cheaper and easier to obtain and hopefully more performance type
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Wed Nov 09, 2011 12:29 pm |
|
yeah good price, just the quality of the actual coil is unknown.... i guess you can be the Guinea Pig
suzukistore sell the just the probes for that sort of money
_________________ You're just hating because you don't understand
|
|
|
|
 |
|