[sogone]

Where is the ground for the fuel sender? I've only got one wire that is the sender signal wire that runs up into the body loom then into the guage cluster. I've checked all the earths for the guage cluster and body yet my guage still isn't working. I'm assuming the sender needs an earth.

[Damo]

sogone wrote:

Where is the ground for the fuel sender? I've only got one wire that is the sender signal wire that runs up into the body loom then into the guage cluster. I've checked all the earths for the guage cluster and body yet my guage still isn't working. I'm assuming the sender needs an earth.

It's probably earthed through the body of the sender.

[sogone]

Mmmm. Odd. It all appears to be earthed and everything connecte.

[Damo]

No reading, or incorrect reading?

Some good tech here.

[sogone]

It was working semi fine, had a problem with reading at all. So I did the fix that you linked. Made sure it all connected properly and was gunk free. Assembled. Then changed the body over to the tin top, wired up my 1.6 baleno and a few other things. Now it won't work. Just sits on the very bottom.