| Author |
Message |
hobble
Joined: Tue Jul 05, 2011 10:52 pm Posts: 52 Location: brisbane
|
 Posted: Thu Dec 01, 2011 4:41 am |
|
|
Hi guys my rear diff run dry of oil and now the crown wheel is no good are the gears in the front diff the same as i would like to take the front crown wheel and pinon and put them in the rear
any help would be great
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Thu Dec 01, 2011 4:43 am |
|
|
What car are we talking about?
|
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Thu Dec 01, 2011 4:59 am |
|
Scrawn wrote: What car are we talking about?
It's probably "his" car

|
|
|
|
 |
hobble
Joined: Tue Jul 05, 2011 10:52 pm Posts: 52 Location: brisbane
|
 Posted: Thu Dec 01, 2011 5:31 am |
|
|
sorry its a sierra ute with 1992 sierra wt diffs in it
|
|
|
|
 |
SierraDan

az supporter
Joined: Fri Feb 04, 2011 10:55 pm Posts: 9348 Location: Newcastle
Vehicle: G13BB Jimny
|
 Posted: Thu Dec 01, 2011 5:43 am |
|
|
Yep you can.
_________________ mlm
|
|
|
|
 |
hobble
Joined: Tue Jul 05, 2011 10:52 pm Posts: 52 Location: brisbane
|
 Posted: Thu Dec 01, 2011 9:10 am |
|
|
|
 |
want33s

az supporter
Joined: Fri Nov 16, 2007 10:30 pm Posts: 8134 Location: Sunshine Coast Qld
|
 Posted: Thu Dec 01, 2011 9:14 am |
|
|
Front centre will go in rear ONLY if it has 26 spline side gears fitted.
I wouldn't recommend fitting a WT front centre to the rear as they are a 2 pinion setup, not as strong as the 4 pinion rear.
NT run a 4 pinion front.
|
|
|
|
 |
hobble
Joined: Tue Jul 05, 2011 10:52 pm Posts: 52 Location: brisbane
|
 Posted: Thu Dec 01, 2011 9:32 am |
|
|
i have a arb air looker in the rear but just want to take the front crownwheels and pinnon to the back trying not to spend to much as i have just done the gti engine convertion rebuilt the gear box moneys a bit low now so a swap is the best way i think thanks guys for your help means a lot
thanks
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Thu Dec 01, 2011 10:54 am |
|
|
It will work if you put the locker back in the back.
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
|