[Fatzook]

Does a 220mm wheelbase extension sound like alot?

[Rusho]

Fatzook wrote:

Does a 220mm wheelbase extension sound like alot?

No

[Fatzook]

Rusho wrote:

Fatzook wrote:

Does a 220mm wheelbase extension sound like alot?

No

30mm front, 190mm rear.

[Joe]

So if your making it longer does that mean your making the tray longer?

[Fatzook]

Joe wrote:

So if your making it longer does that mean your making the tray longer?

Tray is already longer. I hate trays that finish flush with the chassis, and refuse to build them. The tray currently finishes 300mm behind the chassis, so even after a 150mm chassis extension, the tray will be long enough.


The idea is to fit a front shaft in the rear, and I've guestimated that is about 190mm longer.

[tombutt]

tray was always going to be long try to get fatzook to build a short tray you would have more hope of him finishing camo 1 or 2

[Fatzook]

tombutt wrote:

tray was always going to be long try to get fatzook to build a short tray you would have more hope of him finishing camo 1 or 2

Hahahaha dickhead

[Rusho]

tombutt wrote:

tray was always going to be long try to get fatzook to build a short tray you would have more hope of him finishing camo 1 or 2

You forgot Camo 3....it's finished


......nearly

[Fatzook]

Rusho wrote:

tombutt wrote:

tray was always going to be long try to get fatzook to build a short tray you would have more hope of him finishing camo 1 or 2

You forgot Camo 3....it's finished

Swaybar?

[atari4x4]

Fatzook wrote:

tombutt wrote:

tray was always going to be long try to get fatzook to build a short tray you would have more hope of him finishing camo 1 or 2

Hahahaha dickhead

[Rusho]

Fatzook wrote:

Rusho wrote:

tombutt wrote:

tray was always going to be long try to get fatzook to build a short tray you would have more hope of him finishing camo 1 or 2

You forgot Camo 3....it's finished

Swaybar?

Forgot about that

[Fatzook]

This tray is still short, but at the moment there is about 450mm from rear of tyre to rear of tray.



You can see the sunken floor in the middle of the tray. The rear cross bar will be the raised, relocated upper shock mount also.

[Bucketload]

I’m impressed, except that hammer is way too small.

[Fatzook]

Bucketload wrote:

I’m impressed, except that hammer is way too small.

Lots of time with the grinder means less time with the hammer

There are atleast 50 hand notched sections of tube on the tray, and counting. I think the hammer was used to remove the old tray, which was a square slab to carpet hovering over 4 legs, held in place with bird shit.

[matt.scorgie]

yeah old tray was horrible i bought it like that

[remydog05]

Will this be CCDA Fatzook?
The reason I ask is because the drawings they have on there website dont really suit a trayback, softtop from what I can figure.

http://www.ccda4wd.com.au/images/Rollov ... 060428.pdf

[Rusho]

I think this is a freestyle tray remydog... The only plans involved are in Pete's gorilla shaped head

[Fatzook]

remydog05 wrote:

Will this be CCDA Fatzook?
The reason I ask is because the drawings they have on there website dont really suit a trayback, softtop from what I can figure.

http://www.ccda4wd.com.au/images/Rollov ... 060428.pdf

Can't see why not. The design principles are the same. The materials used qualify. The only thing missing is the taxi bar.....

[055ETH]

looks alot better in person(the tray) After visiting yesterday and talking to pete i got in my work truck and felt incredably broker after all the talk about exo cages and chassis extensions...and After seeing what a 4age does to stock transfer gears i am definalty puttign reduction ones in..

Thanks for all the usefull info you hacve passed on man.... oh and i'll pick up the kl71 for your vit either tomorrow arvo or thursday and drop it round

[Fatzook]

055ETH wrote:

Thanks for all the usefull info you hacve passed on man.... oh and i'll pick up the kl71 for your vit either tomorrow arvo or thursday and drop it round

No worries. see ya when I see ya.

[Damo]

Geez Pete, you started out doing a tray now you have a laundry list as long as your arm!

You should rename yourself Scope Creep Fabrication

[Fatzook]

Damo wrote:

Geez Pete, you started out doing a tray now you have a laundry list as long as your arm!

You should rename yourself Scope Creep Fabrication

I was thinking something with the phrase 'move the goal posts', but its just not catchy enough

[Damo]

Fatzook wrote:

Damo wrote:

Geez Pete, you started out doing a tray now you have a laundry list as long as your arm!

You should rename yourself Scope Creep Fabrication

I was thinking something with the phrase 'move the goal posts', but its just not catchy enough

I am a marketing genius

[just_cruizin]

as long as whatever you come up with is closely followed by

"it'll be reflected in the invoice"

don't suppose it matters.

[Fatzook]

just_cruizin wrote:

as long as whatever you come up with is closely followed by

"it'll be reflected in the invoice"

don't suppose it matters.

Hahahahahahahaaaaaaaaaaaaaaaaaa !!!!!

[Fatzook]

Few pics from last week. I will paint and skin the tray after the rear suspension is completed. I hate scratches





You can see the old tray to the right.

[Scrawny]

Wow! I see what you mean about all those bends doing your head in!

I look forward to seeing what magic you can perform for me in the next few months!!

[Mattmorgo]

Shit yeah those lines around the tire looks good

[Rusho]

[atari4x4]

if only he worked this quick on his own projects