[jeddog01]

Thinking of fitting a G16b engine from a baleno into my jimny and just wondering apart from the adapator kit what other mods need to be done ... cheers

[Gwagensteve]

Tried a search? I think there might be a couple of threads about this in the good tech section.

See what you can find

[GraphicX]

as steve said do a search, tons of info on it & if you aren't willing to research it a bit you probably shouldn't undertake it.

short list;
- cam ring or cam will need to be swapped
- brackets will need to be cut &/or ground & drilled
- injectors will need to be swapped
- longer belt & some hoses used
- oil pick up cut & welded
- possibly drill & tap a crank bearing cap

probably a lot of other little things i can't recall.