auszookers.com • View topic - Dint on dear bumper

Board index » Talking About Stuff » Suzuki Talk

Dint on dear bumper - PROBLEM!

Page 1 of 1

[ 16 posts ]

Print view

Previous topic | Next topic

Author

Message

vitz97

Joined: Tue Oct 06, 2009 10:30 pm
Posts: 13
Location: Brisbane

Posted: Mon Nov 09, 2009 1:59 am

I was at uni the other day and walked out to notice my car was slightly forward (parked) - was really odd. Looked around the rear bumper and realised some idiot back into me (most likely another 4WD with a hard rear bumper). No major damange thank god because the idiot didnt stick around and wait for me!

Anyway, I just went to open my back door and i couldnt open it. When the idiot backed into me, the plastic bumper had no where else to go but bent upwards and is pretty much blocking me from opening the rear door. Is there any way I can remove the bump myself?

*sorry if you cant see properly*

bigrig91

Joined: Mon May 11, 2009 11:30 pm
Posts: 1308
Location: Redcliffe
Vehicle: 96 LWB Vit, 2.5L powerhouse

Posted: Mon Nov 09, 2009 2:02 am

hair dryer and a hammer will do it. :twisted:

_________________
1997 Sierra, daily driver, 60mm coils, 2 inch body

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Mon Nov 09, 2009 2:05 am

Take the bumper off and make a tube bar for it :twisted:

Joe

I live here!

Joined: Sat Jul 04, 2009 11:30 pm
Posts: 49041
Location: Rockingham W.A
Vehicle: JB74

Posted: Mon Nov 09, 2009 2:07 am

bigrig91 wrote:

hair dryer and a hammer will do it. :twisted:

_________________
Joe likes boobs ( . )( . ) ( ° )( ° )

Junior_91

Joined: Tue Mar 17, 2009 10:30 pm
Posts: 1084
Location: Ipswich

Posted: Mon Nov 09, 2009 2:13 am

ScrawnC wrote:

Take the bumper off and make a tube bar for it :twisted:

_________________
TWIN LOCK IT & JUST DRIVE!

vitz97

Joined: Tue Oct 06, 2009 10:30 pm
Posts: 13
Location: Brisbane

Posted: Mon Nov 09, 2009 2:16 am

joseph wrote:

bigrig91 wrote:

hair dryer and a hammer will do it. :twisted:

Shame I got no hair dryer - How is it possible my sister doesn't have a hair dryer but has a straightener?

Junior_91 wrote:

ScrawnC wrote:

Take the bumper off and make a tube bar for it :twisted:

Would love to but im somewhat useless with materials and lack of tools.

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Mon Nov 09, 2009 2:30 am

vitz97 wrote:

joseph wrote:

bigrig91 wrote:

hair dryer and a hammer will do it. :twisted:

Shame I got no hair dryer - How is it possible my sister doesn't have a hair dryer but has a straightener?

[quote="Junior_91"]

Just hit with a hammer then!! :wink:

You have a sister?? :lol:

_________________
I used to be indecisive,
now I'm not so sure.....

coilyzook

Joined: Sun Aug 23, 2009 11:30 pm
Posts: 125
Location: central coast, NSW

Posted: Mon Nov 09, 2009 2:44 am

nah take the bumper off, boil the jug and pour hot water into it, let it heat up and then pour the water out and then go at it with a hammer

i did that the other day with my coily's front bumper and it worked a charm

bigrig91

Joined: Mon May 11, 2009 11:30 pm
Posts: 1308
Location: Redcliffe
Vehicle: 96 LWB Vit, 2.5L powerhouse

Posted: Mon Nov 09, 2009 2:46 am

i have a really good looking and practical rear bumper here for sale if your keen.,polished alloy

_________________
1997 Sierra, daily driver, 60mm coils, 2 inch body

Saam

az supporter

Joined: Mon Jun 12, 2006 11:30 pm
Posts: 2068
Location: Sunshine Coast

Posted: Mon Nov 09, 2009 2:50 am

take it apart straighten the bracket behind, then borrow a heat gun and watch it pop back out

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Mon Nov 09, 2009 2:57 am

Saam wrote:

take it apart straighten the bracket behind, then borrow a heat gun and watch it pop back out

That sound great saam, but where's the HAMMER!!!!! :twisted:

_________________
I used to be indecisive,
now I'm not so sure.....

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Mon Nov 09, 2009 3:24 am

bigrig91 wrote:

i have a really good looking and practical rear bumper here for sale if your keen.,polished alloy

will it fit a vitara? :roll:

_________________
You're just hating because you don't understand

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Mon Nov 09, 2009 3:26 am

atari4x4 wrote:

bigrig91 wrote:

i have a really good looking and practical rear bumper here for sale if your keen.,polished alloy

will it fit a vitara? :roll:

You call me a post whore!! :roll:

_________________
I used to be indecisive,
now I'm not so sure.....

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Mon Nov 09, 2009 3:41 am

steknig wrote:

atari4x4 wrote:

bigrig91 wrote:

i have a really good looking and practical rear bumper here for sale if your keen.,polished alloy

will it fit a vitara? :roll:

You call me a post whore!! :roll:

you are the one & only post whore, aka quote master steknife.... pompoms

_________________
You're just hating because you don't understand

11_evl

Joined: Tue Apr 10, 2007 11:30 pm
Posts: 846
Location: logan reserve, Brisb

Posted: Mon Nov 09, 2009 11:11 am

steknig wrote:

vitz97 wrote:

joseph wrote:

bigrig91 wrote:

hair dryer and a hammer will do it. :twisted:

Shame I got no hair dryer - How is it possible my sister doesn't have a hair dryer but has a straightener?

Junior_91 wrote:

Just hit with a hammer then!! :wink:

You have a sister?? :lol:

you can use her straightener to fix your bumper!!!

_________________
92 sierra, 40" treps, full hydro, F&R steer, 106"W

vitz97

Joined: Tue Oct 06, 2009 10:30 pm
Posts: 13
Location: Brisbane

Posted: Mon Nov 09, 2009 7:53 pm

11_evl wrote:

steknig wrote:

vitz97 wrote:

joseph wrote:

bigrig91 wrote:

hair dryer and a hammer will do it. :twisted:

Shame I got no hair dryer - How is it possible my sister doesn't have a hair dryer but has a straightener?

Junior_91 wrote:

Just hit with a hammer then!! :wink:

You have a sister?? :lol:

you can use her straightener to fix your bumper!!!

Classic! I used hot water and broke the head of the hammer (although it was very old) - slipped straight off, slightly missing my head! Some minor damage under. Ill take the bumper off and post up some pics

Page 1 of 1

[ 16 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 381 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum