| Author |
Message |
Bugsta
Joined: Fri Oct 30, 2009 10:30 pm Posts: 1754 Location: North Brisbane
|
 Posted: Sun Nov 15, 2009 1:19 am |
|
|
I'm sure you've all seen the ads in the 4WD Action magazine and on the DVD for Staun tyre deflators.
They seem to be rather high priced at round $80 a set, a little cheaper on ebay.
Are the other/cheaper brands any good. ARB, etc?
I reckon I'd want a set in the range 5 - 30PSI.
What experience have you guys had with them here?
Do they have PSI markings on the side for easy adjustment or what?
_________________ If you can read this, please tip me back over
|
|
|
|
 |
lump_a_charcoal

az supporter
Joined: Wed Feb 28, 2007 10:30 pm Posts: 4454 Location: Botany, NSW
Vehicle: MY2019 Jimny
|
 Posted: Sun Nov 15, 2009 1:22 am |
|
|
Get the ARB one, it is fast and easy to use.
Aside from that, Stauns are very temperamental - I have some but never use them.
I use a bush ranger type, it is a tyre guage and deflator in one.
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Sun Nov 15, 2009 1:23 am |
|
|
I set mine years ago, I screw them on, the tyres go down, I go on the sand and blow up CV's
makes an unscientific operation a bit less stuffing around, nothing more
|
|
|
|
 |
lump_a_charcoal

az supporter
Joined: Wed Feb 28, 2007 10:30 pm Posts: 4454 Location: Botany, NSW
Vehicle: MY2019 Jimny
|
 Posted: Sun Nov 15, 2009 1:26 am |
|
|
With the Stauns too, there are two types - If it is for your zook, get the lower PSI ones I reckon.
One set does like 5-12PSI, the other does 12-18 or something...
|
|
|
|
 |
Bugsta
Joined: Fri Oct 30, 2009 10:30 pm Posts: 1754 Location: North Brisbane
|
 Posted: Sun Nov 15, 2009 1:30 am |
|
So I am not the only one sitting on my couch with the laptop surfing the zookers forum hey?
Perhaps I can work on a KITT inspired automatic deflation and inflation system that works with the push of a button.
OK, OK, for those who are just too young (Hey, I'm only 33!) KITT is the super smart tLKING AI car that David Hasslehoff, oops - The Hoff, used to drive around in the 80's series 'Knight Rider' saving the day.
_________________ If you can read this, please tip me back over
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Sun Nov 15, 2009 1:32 am |
|
Hummers already have that 
|
|
|
|
 |
Bugsta
Joined: Fri Oct 30, 2009 10:30 pm Posts: 1754 Location: North Brisbane
|
 Posted: Sun Nov 15, 2009 1:33 am |
|
Lump - The ones i have come across are 0-10, 5-30 and 15-55. i think 5-30 would be suitable for me.
Got a link for that Bush Ranger one?
is it anything like this one...
http://www.davesport.com/cgi-bin/davesport/ARB505.html
_________________ If you can read this, please tip me back over
|
|
|
|
 |
Polar_Bear
Joined: Sat Aug 12, 2006 11:30 pm Posts: 2511 Location: Adelaide SA
|
 Posted: Sun Nov 15, 2009 1:35 am |
|
royce wrote: Hummers already have that 
yeah but if you get a flat in one tyre, they all go down 
_________________ Go Hard, Trailer Home
|
|
|
|
 |
Mugwui
Joined: Tue Nov 04, 2008 10:30 pm Posts: 1241 Location: Antarctica!
|
 Posted: Sun Nov 15, 2009 1:54 am |
|
|
I just bought a new ARB one two weeks ago, and after seeing other people use all sorts of different brands, some good, some bad, I have fount the ARB to be fantasic. Pick the pressure you want and st them all the same. The only con I can come up with, is that you can only do one tyre at a time, but is still my pick of the bunch.
_________________ If your not breaking shit, try harder!!!
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Sun Nov 15, 2009 2:18 am |
|
I use a stick I find on the ground & a $12 gauge. 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
31zook
Joined: Tue Mar 24, 2009 10:30 pm Posts: 9242 Location: maito
Vehicle: <3 Edna <3
|
 Posted: Sun Nov 15, 2009 2:23 am |
|
steknig wrote: I use a stick I find on the ground & a $12 gauge. 
I went looking for a stick and lost my gauge... 
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Sun Nov 15, 2009 2:28 am |
|
31zook wrote: steknig wrote: I use a stick I find on the ground & a $12 gauge.  I went looking for a stick and lost my gauge... 
 peaceout
That's how I got the gauge I have now, looking for a stick! peaceout
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Sun Nov 15, 2009 2:33 am |
|
Mugwui wrote: I just bought a new ARB one two weeks ago, and after seeing other people use all sorts of different brands, some good, some bad, I have fount the ARB to be fantasic. Pick the pressure you want and st them all the same. The only con I can come up with, is that you can only do one tyre at a time, but is still my pick of the bunch.
x steking
you can lock this thread now...
_________________ You're just hating because you don't understand
|
|
|
|
 |
Bugsta
Joined: Fri Oct 30, 2009 10:30 pm Posts: 1754 Location: North Brisbane
|
 Posted: Sun Nov 15, 2009 2:46 am |
|
|
lock the thread - what does that mean?
_________________ If you can read this, please tip me back over
|
|
|
|
 |
31zook
Joined: Tue Mar 24, 2009 10:30 pm Posts: 9242 Location: maito
Vehicle: <3 Edna <3
|
 Posted: Sun Nov 15, 2009 2:48 am |
|
Bugsta wrote: lock the thread - what does that mean?
It means that the thread is shut off so you can view it but not reply.
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Sun Nov 15, 2009 2:59 am |
|
|
I bought one of the ARB ezy deflators & I can have all 4 tyres down to 8psi in the time it takes a mate to let one down to 12psi using a stick.
Every time I use it I wonder what I was doing for all those years... It's like using ratchet spanners for the first time, WTF did I actually turn that bolt 1/8th of a turn pulling the spanner off each time & going again!!!
The best thing about it is it's not set up for one pressure like the stauns & it was cheaper.
_________________ You're just hating because you don't understand
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Sun Nov 15, 2009 3:03 am |
|
|
Mmmmmmm, ratchet spanner's.
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
Bugsta
Joined: Fri Oct 30, 2009 10:30 pm Posts: 1754 Location: North Brisbane
|
 Posted: Sun Nov 15, 2009 3:03 am |
|
|
Why would you want to do that?
Other people may have useful information. Only been up 2 hrs.
_________________ If you can read this, please tip me back over
|
|
|
|
 |
Stuey

az supporter
Joined: Sat Feb 02, 2008 10:30 pm Posts: 621 Location: Perth, WA
Vehicle: 97 SV420/627 SWB Vitara
|
 Posted: Sun Nov 15, 2009 3:07 am |
|
|
I have both the staun and the ARB ezy deflator. Staun ones are ok but only give you one useable set pressure, unless you set the differently and use them independant of one another. I have mine set to a pressure of around 10 PSI. If I want anything other than that I use the ezy deflator (which is a fairly new purchase for me). Must say its a very good item and would suit most peoples tyre pressure needs.
_________________ Lifted, Locked & Loud. Expensive Little Toy...
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Sun Nov 15, 2009 3:07 am |
|
Bugsta wrote: Why would you want to do that?
Other people may have useful information. Only been up 2 hrs.
it's a figure of speach, the correct answer was posted...
I seconded it with the "x steking" (aka post whore) now it's been answered it can be shut & put to bed.
This thread will stay open as nothing gets locked on auszookers, sometimes something might filed in the big round filing cabinet called the bin.
_________________ You're just hating because you don't understand
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Sun Nov 15, 2009 3:09 am |
|
|
I've got Stauns and don't mind them. I've used the ARB one and think it's awesome, if I had spare cash I'd have one of them too.
|
|
|
|
 |
gregt
Joined: Wed Apr 09, 2008 11:30 pm Posts: 117 Location: umina
|
 Posted: Sun Nov 15, 2009 3:40 am |
|
|
bcf have a copy of the arb one for about 30 bucks. don,t know if they are any good i only saw it after i got my arb one whichis great
|
|
|
|
 |
Mugwui
Joined: Tue Nov 04, 2008 10:30 pm Posts: 1241 Location: Antarctica!
|
 Posted: Sun Nov 15, 2009 4:14 am |
|
|
Just looked at my recipt from two weeks ago, ARB EZY Deflator $60....
Well worth it.
_________________ If your not breaking shit, try harder!!!
|
|
|
|
 |
SuziBlu
Joined: Mon Sep 14, 2009 11:30 pm Posts: 4268 Location: Eyre Peninsula
|
 Posted: Sun Nov 15, 2009 12:13 pm |
|
|
I have strauns, so do all my mates.
I set mine for 6psi, never let me down.
_________________ Bad decisions make good stories.
|
|
|
|
 |
andrew88

az supporter
Joined: Fri Oct 02, 2009 11:30 pm Posts: 185 Location: south brissy
|
 Posted: Sun Nov 15, 2009 1:10 pm |
|
|
i got a arb ezy deflater. i love it. does not take long to let a tyre down.
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Sun Nov 15, 2009 1:44 pm |
|
SuziBlu wrote: I have strauns, so do all my mates.
I set mine for 6psi, never let me down.
Thay not ment to let YOU down, just ya tyre's 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
Bugsta
Joined: Fri Oct 30, 2009 10:30 pm Posts: 1754 Location: North Brisbane
|
 Posted: Sun Nov 15, 2009 2:04 pm |
|
|
Crikey 6psi.
Is that not a little low?
What type of country is that good for?
_________________ If you can read this, please tip me back over
|
|
|
|
 |
lump_a_charcoal

az supporter
Joined: Wed Feb 28, 2007 10:30 pm Posts: 4454 Location: Botany, NSW
Vehicle: MY2019 Jimny
|
 Posted: Sun Nov 15, 2009 2:11 pm |
|
SuziBlu wrote: I have strauns, so do all my mates.
I set mine for 6psi, never let me down.
Lol that's a glowing endorsement!
6 psi is OK for rocks, and dirt...
Remember it's only a Zook!
|
|
|
|
 |
31zook
Joined: Tue Mar 24, 2009 10:30 pm Posts: 9242 Location: maito
Vehicle: <3 Edna <3
|
 Posted: Sun Nov 15, 2009 2:42 pm |
|
|
yeah i run 8psi up front and 6psi in the rear... never had a problem
|
|
|
|
 |
SuziBlu
Joined: Mon Sep 14, 2009 11:30 pm Posts: 4268 Location: Eyre Peninsula
|
 Posted: Sun Nov 15, 2009 2:48 pm |
|
|
I run very soft sand mostly, so soft as is good.
I recon as if I set them at 6, an get in the shit, I can go down to 3 or so an get out, piece of cake.
After taking mates out an they see how well the strauns work, they all get them.
I have never used any other so cannot comment on them.
I just know, when I air down by hand, all the bloody valves are on the bottom, i break me back, and the flies give me the shits big time, this way, screw on, forget.
Every now and then, dunno, say 10 times I air down, I check with my digital gauge, but never a change of pressure.
_________________ Bad decisions make good stories.
|
|
|
|
 |
|