auszookers.com • View topic - Do 1.3 extractors fit a 1.6

Board index » Talking About Stuff » Suzuki Talk

Do 1.3 extractors fit a 1.6

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

squirezook

Joined: Wed Aug 27, 2008 11:30 pm
Posts: 300
Location: Brisbane southside

Posted: Mon Dec 14, 2009 4:11 pm

as above
thanks

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Mon Dec 14, 2009 4:22 pm

1.3 carb, efi or twincamefi

1.6 carb or efi

??

_________________

BlueSuzy wrote:

I'm over the G16b's.

squirezook

Joined: Wed Aug 27, 2008 11:30 pm
Posts: 300
Location: Brisbane southside

Posted: Mon Dec 14, 2009 4:27 pm

BlueSuzy wrote:

1.3 carb, efi or twincamefi

1.6 carb or efi

??

1.3 carb to 1.6 carb
sorry

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Mon Dec 14, 2009 5:56 pm

I have heard they fit. I have never done it.

Only difference it should be is the head height will be alittle taller.

_________________

BlueSuzy wrote:

I'm over the G16b's.

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Mon Dec 14, 2009 7:32 pm

squirezook wrote:

BlueSuzy wrote:

1.3 carb, efi or twincamefi

1.6 carb or efi

??

1.3 carb to 1.6 carb
sorry

Yes.

squirezook

Joined: Wed Aug 27, 2008 11:30 pm
Posts: 300
Location: Brisbane southside

Posted: Mon Dec 14, 2009 7:54 pm

Thanks for the replies.
I thought they were the same. I cracked one pipe right through where 4 goes into one. can only weld where you can get to . :cry:

I think a flex joint would be a good idear straight after extractors. Any one else done that?

zuk85

Joined: Sun Jul 05, 2009 11:30 pm
Posts: 656
Location: Sunshine coast
Vehicle: 07 vvt jimny

Posted: Mon Dec 14, 2009 11:22 pm

squirezook wrote:

Thanks for the replies.
I thought they were the same. I cracked one pipe right through where 4 goes into one. can only weld where you can get to . :cry:

I think a flex joint would be a good idear straight after extractors. Any one else done that?

your crazy.... i like you

but your crazy ha ha ha ha

_________________
sorry CHOP

Jimny's Are taking Over

squirezook

Joined: Wed Aug 27, 2008 11:30 pm
Posts: 300
Location: Brisbane southside

Posted: Mon Dec 14, 2009 11:53 pm

zuk85 wrote:

squirezook wrote:

Thanks for the replies.
I thought they were the same. I cracked one pipe right through where 4 goes into one. can only weld where you can get to . :cry:

I think a flex joint would be a good idear straight after extractors. Any one else done that?

your crazy.... i like you

but your crazy ha ha ha ha

Have you not seen one? Here have a look
Meant to take the load off the extractors from the rest of exhaust.

http://cgi.ebay.com.au/NEW-2-STAINLESS- ... 2e91651dbf

Hybrid

az supporter

Joined: Mon Apr 21, 2008 11:30 pm
Posts: 1095
Location: Bulimba, Brisbane
Vehicle: '92 Sierra

Posted: Tue Dec 15, 2009 12:46 pm

Mine runs a flex joint. It helps me out because my system runs tight up against the body and chassis to get around a long range tank. I'd be surprised though if you cracked your headers due to the weight of the rest of your system. Theres a support not far back from where the headers join the pipe.

squirezook

Joined: Wed Aug 27, 2008 11:30 pm
Posts: 300
Location: Brisbane southside

Posted: Tue Dec 15, 2009 2:48 pm

Hybrid wrote:

I hit something hard and it broke the first support (rubber mount) and cracked one pipe clean through. I reckon a flex joint may have prevented that. Gota sort out the front springs, way to rigid..

Page 1 of 1

[ 10 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Beery, Google [Bot] and 560 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum