| Author |
Message |
Jord
Joined: Sun Jan 24, 2010 10:30 pm Posts: 196 Location: Perth, WA
Vehicle: 2012 Jimny, Locked both ends
|
 Posted: Sat Jun 05, 2010 11:59 am |
|
|
hi all,
just wondering what effect removing the front swaybar would have on a sierra, i know in landcruiser's it turns it into a real mission to drive, but what about with these little sierras?
Jordan
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Sat Jun 05, 2010 12:01 pm |
|
Take it off, take it for a spin & see what you think, then put it back on & tell us if you notice a difference. 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
gypsy

az supporter
Joined: Mon Oct 27, 2008 10:30 pm Posts: 1027 Location: north brisbane
Vehicle: lj81 stockman
|
 Posted: Sat Jun 05, 2010 12:02 pm |
|
|
take it off dont no y they have then on leafys
_________________ the wobble rocks
|
|
|
|
 |
Moph

az supporter
Joined: Sat May 19, 2007 11:30 pm Posts: 2535 Location: Perth
Vehicle: 93 Sierra
|
 Posted: Sat Jun 05, 2010 12:10 pm |
|
|
Makes a bit of difference if pushed hard around roundabouts etc but hardly anything to normal onroad driving. If you're driving normally you probably won't notice it.
|
|
|
|
 |
lordfury007
Joined: Mon Sep 28, 2009 11:30 pm Posts: 298 Location: Darwin, NT
|
 Posted: Sat Jun 05, 2010 12:13 pm |
|
|
I've pulled the front swaybar off a 98 Holden Rodeo, a 2000 Suzuki GV and my current 88 Sierra, and haven't really noticed the difference on any of them...
Then again, I'm not a crazy driver that likes to take corners at 120kph...
_________________ 1988 Suzuki Sierra (SJ50)
1.6L G16A (EFI) with Su
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Sat Jun 05, 2010 12:40 pm |
|
lordfury007 wrote: I've pulled the front swaybar off a 98 Holden Rodeo, a 2000 Suzuki GV and my current 88 Sierra, and haven't really noticed the difference on any of them...
Then again, I'm not a crazy driver that likes to take corners at 120kph...
I do, But i don't run any swaybars.
And alot of sierra's can't even do 120kph 
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
lordfury007
Joined: Mon Sep 28, 2009 11:30 pm Posts: 298 Location: Darwin, NT
|
 Posted: Sat Jun 05, 2010 7:44 pm |
|
BlueSuzy wrote: lordfury007 wrote: I've pulled the front swaybar off a 98 Holden Rodeo, a 2000 Suzuki GV and my current 88 Sierra, and haven't really noticed the difference on any of them...
Then again, I'm not a crazy driver that likes to take corners at 120kph... I do, But i don't run any swaybars. And alot of sierra's can't even do 120kph 
mine can 
_________________ 1988 Suzuki Sierra (SJ50)
1.6L G16A (EFI) with Su
|
|
|
|
 |
ando_zook94
Joined: Sun May 09, 2010 9:23 pm Posts: 263 Location: brissy
|
 Posted: Sat Jun 05, 2010 8:39 pm |
|
|
We just pulled the sway bar off our 94 (SJ70) and it has made little difference to the Handling, but made a big difference to the wheel exstension. Great for off road.
_________________ If in doubt power out!
|
|
|
|
 |
SuziBlu
Joined: Mon Sep 14, 2009 11:30 pm Posts: 4268 Location: Eyre Peninsula
|
 Posted: Sat Jun 05, 2010 8:41 pm |
|
lordfury007 wrote: BlueSuzy wrote: lordfury007 wrote: I've pulled the front swaybar off a 98 Holden Rodeo, a 2000 Suzuki GV and my current 88 Sierra, and haven't really noticed the difference on any of them...
Then again, I'm not a crazy driver that likes to take corners at 120kph... I do, But i don't run any swaybars. And alot of sierra's can't even do 120kph  mine can 
I don't think my lil suzi could do 120kph if it was dropped out of a helicopter at 10,000'
|
|
|
|
 |
89_tintop

az supporter
Joined: Fri Aug 07, 2009 11:30 pm Posts: 3159 Location: gold coast
|
 Posted: Sat Jun 05, 2010 9:23 pm |
|
SuziBlu wrote: lordfury007 wrote: BlueSuzy wrote: lordfury007 wrote: I've pulled the front swaybar off a 98 Holden Rodeo, a 2000 Suzuki GV and my current 88 Sierra, and haven't really noticed the difference on any of them...
Then again, I'm not a crazy driver that likes to take corners at 120kph... I do, But i don't run any swaybars. And alot of sierra's can't even do 120kph  mine can  I don't think my lil suzi could do 120kph if it was dropped out of a helicopter at 10,000'
somehing must be wrong then.. I can sit on 120 all day.. And still accelerate ( if you want to call it that) it's a little slow to accelerate from there but can still go faster
|
|
|
|
 |
SuziBlu
Joined: Mon Sep 14, 2009 11:30 pm Posts: 4268 Location: Eyre Peninsula
|
 Posted: Sat Jun 05, 2010 9:55 pm |
|
|
Seriously, I do not want to even think about that sort of speed in a short wheel base suzi, I would be shit scared, speed for me is a designed fast car, not a designed serious off roader.
Even if my suzi could go fast, 80-90 is fast enuf. Big wheels, big lift, no sway bar, naa fuk speed in that.
_________________ Bad decisions make good stories.
|
|
|
|
 |
lump_a_charcoal

az supporter
Joined: Wed Feb 28, 2007 10:30 pm Posts: 4454 Location: Botany, NSW
Vehicle: MY2019 Jimny
|
 Posted: Sat Jun 05, 2010 10:51 pm |
|
|
Anyway,
I have been driving mine without a swaybar for over 3 years...
|
|
|
|
 |
bazook

az supporter
Joined: Sat Jul 12, 2008 11:30 pm Posts: 1082 Location: brisbane logan
|
 Posted: Sat Jun 05, 2010 11:17 pm |
|
|
|
 |
reeceh

az supporter
Joined: Thu Apr 29, 2010 8:45 am Posts: 1230 Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's
|
 Posted: Sat Jun 05, 2010 11:50 pm |
|
|
negative maach3 in mine lol
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Sat Jun 05, 2010 11:56 pm |
|
Sorry lumpa  I got the noobs fighting to say mine is faster
Alot of people run no swaybar. Handling onroad is slightly changed. Slightly as in poofteenth of a bees dick.
Oh. And will be illegal. But no one will notice unless your called over the pits.
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
lump_a_charcoal

az supporter
Joined: Wed Feb 28, 2007 10:30 pm Posts: 4454 Location: Botany, NSW
Vehicle: MY2019 Jimny
|
 Posted: Sun Jun 06, 2010 12:03 am |
|
|
|
 |
alien
Joined: Wed Mar 24, 2010 10:30 pm Posts: 16343 Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.
|
 Posted: Sun Jun 06, 2010 12:10 am |
|
|
my old 1.3L engine with nothing but some exhaust work and 215/75r15's got me to 160km/hr (well, where it would be on the speedo if it was there) once... i even got the speeding fine to prove it!
That aside - i wasnt running a swaybar in mine either, understeered a bit more on sharp bends but nothing too drastic changed.
_________________ 
|
|
|
|
 |
31zook
Joined: Tue Mar 24, 2009 10:30 pm Posts: 9242 Location: maito
Vehicle: <3 Edna <3
|
 Posted: Sun Jun 06, 2010 12:26 am |
|
i don't run a sway bar on either of mine and i do 150.... and still more to go 
|
|
|
|
 |
eldo

az supporter
Joined: Sat May 30, 2009 11:30 pm Posts: 2770 Location: sunny coast
Vehicle: jimny
|
 Posted: Sun Jun 06, 2010 1:06 am |
|
|
mine got the death wobbles the other day in the wet and the front was understeering into a corner at 120km/h. stupid i know, it was on a down hill run and i was at that speed wfore i knew it, scared me alot
|
|
|
|
 |
Reevesy
Joined: Mon Apr 19, 2010 11:30 pm Posts: 6 Location: Albury
|
 Posted: Sun Jun 06, 2010 6:35 am |
|
|
Yeah, i pulled my sway bar out about a month ago.
Nothin changed at all, but i figured the hard-as-fuck springs were to blame.
Slightly more ?articulation? in ruts, but the shockers fully extend at about normal ride height anyway..
Haha, got the needle halfway through the M on KM/h. Downhill, naturally.
_________________ leaks, leaks, everywhere leaks.
|
|
|
|
 |
whincup

az supporter
Joined: Sat Apr 17, 2010 11:30 pm Posts: 1588 Location: Gracemere, QLD
Vehicle: '94 suzuki maruti
|
 Posted: Sun Jun 06, 2010 7:07 am |
|
|
fuck that. best ive ever done in mine is 120km/h downhill... mind you, 225,000km no rebuild, all stock under the hood, and thicker oil than most (seems to run smoother & quieter)
|
|
|
|
 |
alien
Joined: Wed Mar 24, 2010 10:30 pm Posts: 16343 Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.
|
 Posted: Sun Jun 06, 2010 7:12 am |
|
|
ahhh cmon you havent lived (or risked death?) unless you've taken a sierra off its speedo, just imagine: rocketing across the ground in a tin can with the aerodynamics of a loaf of bread and handling of a billy cart all the while being deafened by the howl of tyres, screaming engine and wailing gearbox =)
_________________ 
|
|
|
|
 |
dawsey
Joined: Fri Mar 19, 2010 10:30 pm Posts: 218 Location: perth
|
 Posted: Sun Jul 25, 2010 6:41 am |
|
|
after reading these posts, I take it the general consensus is .Im just lugging around 5kgs of steel for no reason..might take it off
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Sun Jul 25, 2010 7:54 am |
|
alien wrote: ahhh cmon you havent lived (or risked death?) unless you've taken a sierra off its speedo, just imagine: rocketing across the ground in a tin can with the aerodynamics of a loaf of bread and handling of a billy cart all the while being deafened by the howl of tyres, screaming engine and wailing gearbox =)
 I'm done.... 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
|