auszookers.com • View topic - transfercase and heavy Clutch

Board index » Talking About Stuff » Suzuki Talk

transfercase and heavy Clutch

Page 1 of 1

[ 11 posts ]

Print view

Previous topic | Next topic

Author

Message

TryHard

Joined: Thu May 13, 2010 1:49 am
Posts: 1041
Location: Perth

Posted: Thu Jun 17, 2010 2:25 am

ok well i was thinkin of getting

Sierra 6.5.1 reduction gears for $749.00

..but im not sure how much it would cost to get put in ...and if i need a heavy clutch ...as well ..i will find out but does anyone have a rough idea of cost ?

jdk81

Joined: Sat Jul 18, 2009 11:30 pm
Posts: 2372
Location: Ballarat, VIC

Posted: Thu Jun 17, 2010 2:41 am

Lowrangeoffroad has 6.5 gears, and gear install suppliment kit for US$590, after shipping and exchange rate etc, it will be cheaper than buying here.

Install you can do yourself, not too difficult. For the cost of labour to install it, you could probably buy the required tools etc and do it yourself.

If your clutch doesnt need to be changed, I wouldnt bother.
If it does need to be changed, I would also change the rear main seal, and input and output seals on the gearbox while you are at it.
I put an exedy heavy duty clutch in mine. Lots of people say HD clutches break clutch cables, but mine hasn't broken yet (25,000 km later).

Ben_Sierra

az supporter

Joined: Wed Sep 30, 2009 11:30 pm
Posts: 4472
Location: Perth

Posted: Thu Jun 17, 2010 2:44 am

If you are reducing the gearing, you will be reduing the strain on the clutch, so an HD clutch would be IMO a waste of time and money...

_________________
I want my old sig back

TryHard

Joined: Thu May 13, 2010 1:49 am
Posts: 1041
Location: Perth

Posted: Thu Jun 17, 2010 2:57 am

Ben_Sierra wrote:

If you are reducing the gearing, you will be reduing the strain on the clutch, so an HD clutch would be IMO a waste of time and money...

ok thxs i got the clutch part worked out ...my 2nd question is what should i reduce it to if i still want to use it on road is a 6.5:1 Reduction Gears
good for road use ...

Ben_Sierra

az supporter

Joined: Wed Sep 30, 2009 11:30 pm
Posts: 4472
Location: Perth

Posted: Thu Jun 17, 2010 3:39 am

It all depends on tyre size...

_________________
I want my old sig back

TryHard

Joined: Thu May 13, 2010 1:49 am
Posts: 1041
Location: Perth

Posted: Thu Jun 17, 2010 3:54 am

Ben_Sierra wrote:

It all depends on tyre size...

im running 31s atm

Ben_Sierra

az supporter

Joined: Wed Sep 30, 2009 11:30 pm
Posts: 4472
Location: Perth

Posted: Thu Jun 17, 2010 4:00 am

6.5s and 31's would be a reasonable setup.

_________________
I want my old sig back

lump_a_charcoal

az supporter

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Posted: Thu Jun 17, 2010 4:22 am

That's what I run, it is fairly acceptable.

Ben_Sierra

az supporter

Joined: Wed Sep 30, 2009 11:30 pm
Posts: 4472
Location: Perth

Posted: Thu Jun 17, 2010 4:31 am

Although, of course, it depends on what sort of driving you do, both on and off road...

_________________
I want my old sig back

Rockhopper

Joined: Sun Jun 22, 2008 11:30 pm
Posts: 1265
Location: Chipping Norton

Posted: Thu Jun 17, 2010 7:48 am

That's what I also run. Will do 110km/h on freeway no probs.

_________________
We're riding in the Ninky Nonk!

lordfury007

Joined: Mon Sep 28, 2009 11:30 pm
Posts: 298
Location: Darwin, NT

Posted: Thu Jun 17, 2010 8:21 am

A good site that does the math for you is here

http://www.lepayne.com/gears.html

_________________
1988 Suzuki Sierra (SJ50)
1.6L G16A (EFI) with Su

Page 1 of 1

[ 11 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 71 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum