auszookers.com • View topic - Grand Vitara Front Diff Centre

Board index » Shift It And Find It » Getting rid of stuff

Grand Vitara Front Diff Centre

Page 1 of 1

[ 29 posts ]

Print view

Previous topic | Next topic

Author

Message

buzbox

Joined: Thu Jul 16, 2009 11:30 pm
Posts: 3600
Location: Wollongong NSW
Vehicle: LWB Sierra & XL7

Posted: Wed Jul 07, 2010 12:08 am

Grand Vitara front Diff Centre and other bits and pieces incl ring and pinion.

These are left over's from my GV Steel diff swap, The pinion that is in the alloy housing is a GV pinion. The diff dude started to put the GV gear back into the alloy housing when he wasn't suppose to, so it would need to be pressed out. It comes with a few other bits and pieces to make it all complete.

$150

_________________
'92 Vitara & Camper trailer

tanshi

az supporter

Joined: Tue Jan 09, 2007 10:30 pm
Posts: 7717
Location: Brisbane

Posted: Wed Jul 07, 2010 12:33 am

any chance you can do a tooth count on the ring and pinion please?

buzbox

Joined: Thu Jul 16, 2009 11:30 pm
Posts: 3600
Location: Wollongong NSW
Vehicle: LWB Sierra & XL7

Posted: Wed Jul 07, 2010 12:49 am

Pinion = 10
Ring = 43

On the reciept from Suzifour wreckers it says 4.3 = 43x10 to suit '98 Grand Vitara

There appears to be very little to no wear on it. Chances are it's never been engaged into 4wd.

Here are some photo's before being removed from the steel housing.

_________________
'92 Vitara & Camper trailer

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Wed Jul 07, 2010 1:26 am

Whats with the hose?

_________________

BlueSuzy wrote:

I'm over the G16b's.

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Wed Jul 07, 2010 1:39 am

BlueSuzy wrote:

Whats with the hose?

Vacuum actuator cause GV's don't have locking hubs.

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Wed Jul 07, 2010 3:14 am

ooohh ok

_________________

BlueSuzy wrote:

I'm over the G16b's.

DarkHorse

az supporter

Joined: Wed Apr 14, 2010 11:30 pm
Posts: 5413
Vehicle: 08 SV650

Posted: Wed Jul 07, 2010 2:28 pm

Slightly tangiential, but where did you get the diff swap done? Somewhere down in the 'gong? I'm starting to think about where to get mine done...

buzbox

Joined: Thu Jul 16, 2009 11:30 pm
Posts: 3600
Location: Wollongong NSW
Vehicle: LWB Sierra & XL7

Posted: Thu Jul 08, 2010 8:05 am

Joe at Wollongong diesil & 4WD di mine, but any gearbox or diff specialist can do it.

_________________
'92 Vitara & Camper trailer

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Thu Jul 08, 2010 9:50 am

want33s wrote:

BlueSuzy wrote:

Whats with the hose?

Vacuum actuator cause GV's don't have locking hubs.

Nope, cv;'s constantly spin & it lock's in the diff center, that's why we put man hub's on, to stop the bugger's spinning..

_________________
I used to be indecisive,
now I'm not so sure.....

buzbox

Joined: Thu Jul 16, 2009 11:30 pm
Posts: 3600
Location: Wollongong NSW
Vehicle: LWB Sierra & XL7

Posted: Fri Jul 09, 2010 12:17 am

I also have a spare pair of those, I've put them up for sale too.

_________________
'92 Vitara & Camper trailer

buzbox

Joined: Thu Jul 16, 2009 11:30 pm
Posts: 3600
Location: Wollongong NSW
Vehicle: LWB Sierra & XL7

Posted: Wed Sep 08, 2010 7:53 am

Up you go..

_________________
'92 Vitara & Camper trailer

royce

omnipotent being

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Posted: Wed Sep 08, 2010 10:08 am

where is Bugsta and the other dude looking for a 4.3 ratio

buzbox

Joined: Thu Jul 16, 2009 11:30 pm
Posts: 3600
Location: Wollongong NSW
Vehicle: LWB Sierra & XL7

Posted: Wed Sep 08, 2010 10:18 am

Dunno where Bugsta is but the other dude has sent me a PM

$OLD Payment pending

_________________
'92 Vitara & Camper trailer

CairnsZook

az supporter

Joined: Tue Jul 18, 2006 11:30 pm
Posts: 872
Location: West Coast
Vehicle: Zookless

Posted: Wed Sep 08, 2010 10:29 am

The other dude is me

And I'm still looking for one more!

DSzuke

Joined: Mon Jun 22, 2009 11:30 pm
Posts: 108
Location: Orange

Posted: Thu Sep 09, 2010 7:04 am

CairnsZook wrote:

The other dude is me

And I'm still looking for one more!

are you after a 4.3 R&P?

I think I have one. (I did the swap but can't remember what I did with it)

CairnsZook

az supporter

Joined: Tue Jul 18, 2006 11:30 pm
Posts: 872
Location: West Coast
Vehicle: Zookless

Posted: Thu Sep 09, 2010 7:57 am

Thats cool, I've already got one lined up.

Bugsta might want it though.

DSzuke

Joined: Mon Jun 22, 2009 11:30 pm
Posts: 108
Location: Orange

Posted: Thu Sep 09, 2010 9:13 am

I'm pretty sure I have the whole centre including r&p sitting in the garage somewhere if someone needs one.

Can't see myself using it.

DarkHorse

az supporter

Joined: Wed Apr 14, 2010 11:30 pm
Posts: 5413
Vehicle: 08 SV650

Posted: Thu Sep 09, 2010 9:24 am

As of mid next week I will have the internals from an 01 GV V6 Manual available for anyone who wants it.

TZAR

az supporter

Joined: Tue Aug 01, 2006 11:30 pm
Posts: 3459
Location: licking some windows
Vehicle: LJ20 LJ50

Posted: Thu Sep 09, 2010 9:47 am

DarkHorse wrote:

As of mid next week I will have the internals from an 01 GV V6 Manual available for anyone who wants it.

Shep was after one I think

_________________
Camels have nice toes

Bugsta

Joined: Fri Oct 30, 2009 10:30 pm
Posts: 1754
Location: North Brisbane

Posted: Fri Sep 10, 2010 11:10 am

Here I am

Just seen the link Royce posted.

Obviously the housing being GV, it won't suit, but I take it the ring and pinion gears are interchangable with Jimny?

_________________
If you can read this, please tip me back over

Bugsta

Joined: Fri Oct 30, 2009 10:30 pm
Posts: 1754
Location: North Brisbane

Posted: Fri Sep 10, 2010 11:11 am

DarkHorse wrote:

As of mid next week I will have the internals from an 01 GV V6 Manual available for anyone who wants it.

What's the ratio?

_________________
If you can read this, please tip me back over

DarkHorse

az supporter

Joined: Wed Apr 14, 2010 11:30 pm
Posts: 5413
Vehicle: 08 SV650

Posted: Fri Sep 10, 2010 12:52 pm

Whatever stock is for 01 GV V6 manual - 4.3?

buzbox

Joined: Thu Jul 16, 2009 11:30 pm
Posts: 3600
Location: Wollongong NSW
Vehicle: LWB Sierra & XL7

Posted: Fri Sep 10, 2010 8:23 pm

It would be the same as this one advertised.

_________________
'92 Vitara & Camper trailer

Bugsta

Joined: Fri Oct 30, 2009 10:30 pm
Posts: 1754
Location: North Brisbane

Posted: Sat Sep 11, 2010 6:41 am

buzbox wrote:

It would be the same as this one advertised.

Sorry missed it till now.

Just got confirmation that the rear diffn compnents from a GV or ANY Vitara will not fit a jimny, and hence, not a Sierra. What a shame, thought I had a solution.

_________________
If you can read this, please tip me back over

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Sat Sep 11, 2010 6:42 am

Bugsta wrote:

buzbox wrote:

It would be the same as this one advertised.

Sorry missed it till now.

Just got confirmation that the rear diffn compnents from a GV or ANY Vitara will not fit a jimny, and hence, not a Sierra. What a shame, thought I had a solution.

No shit??
That's probly why EVERY ONE has told you FRONT vit diff..

_________________
I used to be indecisive,
now I'm not so sure.....

royce

omnipotent being

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Posted: Sat Sep 11, 2010 6:43 am

what are you on about? we are talking about GV FRONT here

Bugsta

Joined: Fri Oct 30, 2009 10:30 pm
Posts: 1754
Location: North Brisbane

Posted: Sat Sep 11, 2010 7:05 am

ok cool.

Is Dark Horse's a front or rear?

_________________
If you can read this, please tip me back over

buzbox

Joined: Thu Jul 16, 2009 11:30 pm
Posts: 3600
Location: Wollongong NSW
Vehicle: LWB Sierra & XL7

Posted: Sat Sep 11, 2010 7:43 am

Maybe send him a PM to hear it from the dark horses mouth. :lol:

I'm sure he's doing the same as what I've done. Steel diff swap, GV Diff leftover's, the same as what I've pictured above.

_________________
'92 Vitara & Camper trailer

DarkHorse

az supporter

Joined: Wed Apr 14, 2010 11:30 pm
Posts: 5413
Vehicle: 08 SV650

Posted: Sat Sep 11, 2010 12:48 pm

Yup - front diff housing swap - alloy to steel. GV internals and splinters of 1.6 alloy housing will be left over!

PM replied Bugsta.

Page 1 of 1

[ 29 posts ]

Board index » Shift It And Find It » Getting rid of stuff

Who is online

Users browsing this forum: No registered users and 21 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum