auszookers.com • View topic - transfer case rear output seal replacement

Board index » Talking About Stuff » Suzuki Talk

transfer case rear output seal replacement

Page 1 of 1

[ 11 posts ]

Print view

Previous topic | Next topic

Author

Message

whincup

az supporter

Joined: Sat Apr 17, 2010 11:30 pm
Posts: 1588
Location: Gracemere, QLD
Vehicle: '94 suzuki maruti

Posted: Sat Jul 31, 2010 1:09 am

ive done quite a bit of searching, looking for some information... my rear output seal on my transfer case needs replacing, but nowhere local sells the 28mm socket needed to remove the nut on the flange...

im going to get a mechanic to do it, only because i dont have the right size socket. is it as simple as: remove the nut, remove the flange and the seal is right there? ive read both yes and no to that... im just trying to work out rough cost of it...

Merk

Joined: Wed Sep 02, 2009 11:30 pm
Posts: 111
Location: Rockhampton, QLD

Posted: Sat Jul 31, 2010 1:17 am

Yep, depending on the condition of your case, the flange and nut may be quite hard to get off. You'll most probably need a breaker bar to crack the nut and a bearing puller to get the flange off if your doing it yourself.

89_tintop

az supporter

Joined: Fri Aug 07, 2009 11:30 pm
Posts: 3159
Location: gold coast

Posted: Sat Jul 31, 2010 1:26 am

Yeh mate it uss that simple...

the nut may be tight and the flange may be tight. But that is all.fairly simple job.

_________________
http://auszookers.com/index.php?name=Forums&file=v

whincup

az supporter

Joined: Sat Apr 17, 2010 11:30 pm
Posts: 1588
Location: Gracemere, QLD
Vehicle: '94 suzuki maruti

Posted: Sat Jul 31, 2010 1:52 am

ahh sweet. mite jst call mechanic monday... thanks for the help!

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Sat Jul 31, 2010 2:07 am

you could do it in 15mins, just get a rattle gun and it will come off no worries...

foolsp33d

Joined: Tue Mar 11, 2008 10:30 pm
Posts: 2123
Location: Deep Inside Jamies Mouth
Vehicle: Clown Car..

Posted: Sat Jul 31, 2010 2:39 am

31zook wrote:

you could do it in 15mins, just get a rattle gun and it will come off no worries...

yes.. but as mentioned by the OP....

[quote=''wincup'']nowhere local sells the 28mm socket needed to remove the nut on the flange... [/quote]

any decent mechanic will have the required socket.. flick em a 6 pack and see if they will loan it to you... or if you wanted to order it off the net...
http://www.getprice.com.au/ULTIMATE-3-4 ... 739559.htm
37 buckaroos...

_________________
Roads... Where we're going we dont need Roads....

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Sat Jul 31, 2010 10:15 pm

foolsp33d wrote:

31zook wrote:

you could do it in 15mins, just get a rattle gun and it will come off no worries...

yes.. but as mentioned by the OP....

[quote=''wincup'']nowhere local sells the 28mm socket needed to remove the nut on the flange...

any decent mechanic will have the required socket.. flick em a 6 pack and see if they will loan it to you... or if you wanted to order it off the net...
http://www.getprice.com.au/ULTIMATE-3-4 ... 739559.htm
37 buckaroos...[/quote]

OP?

mrw82

az supporter

Joined: Tue Jul 03, 2007 11:30 pm
Posts: 1350
Location: stuck in a hole. not off road, just deception bay.
Vehicle: snotbox, 84 LWB sierra 1 litre

Posted: Sun Aug 01, 2010 4:34 am

the nut is 27mm not 28.

whincup

az supporter

Joined: Sat Apr 17, 2010 11:30 pm
Posts: 1588
Location: Gracemere, QLD
Vehicle: '94 suzuki maruti

Posted: Sun Aug 01, 2010 7:52 am

mrw82 wrote:

the nut is 27mm not 28.

service manual i have off the internet says 28mm... does anyone know if it was the same across all sierra's?

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Sun Aug 01, 2010 7:56 am

31zook wrote:

OP?

OP = Original Poster

_________________
2013 GV
1998 SV420 ute

whincup

az supporter

Joined: Sat Apr 17, 2010 11:30 pm
Posts: 1588
Location: Gracemere, QLD
Vehicle: '94 suzuki maruti

Posted: Sun Aug 01, 2010 7:58 am

whincup wrote:

mrw82 wrote:

the nut is 27mm not 28.

service manual i have off the internet says 28mm... does anyone know if it was the same across all sierra's?

no actually my service manual doesnt say what size to use... i read it here, its step four:

http://zukioffroad.com/Tech_Library/tra ... nstall.htm

Page 1 of 1

[ 11 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 736 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum