| Author |
Message |
lukes_89
Joined: Fri Sep 25, 2009 11:30 pm Posts: 1204 Location: sunshine coast
|
 Posted: Tue Aug 10, 2010 9:27 am |
|
|
hey guys just got my car back ont he road today after doing a full vrs kit and all this other work and then half way home head gasket went and i think rings and everything else went with it. story of my life lately lol but what im wondering is what would i expect to pay if i were to do a full conversion including engine the ben t kit everything that would need to be done what do you think it would be in cost? just rough figures would be good its just an idea im throwing in the air atm.
|
|
|
|
 |
Rusho

Tubby Elfsdong
Joined: Sun Aug 02, 2009 11:30 pm Posts: 6501 Location: Northside, Brisbane
Vehicle: Coily Sierra
|
 Posted: Tue Aug 10, 2010 9:28 am |
|
|
2000-3000???
_________________ Shep is a closet jimny lover!!!!
|
|
|
|
 |
Rusho

Tubby Elfsdong
Joined: Sun Aug 02, 2009 11:30 pm Posts: 6501 Location: Northside, Brisbane
Vehicle: Coily Sierra
|
 Posted: Tue Aug 10, 2010 9:30 am |
|
|
Who did the work? i think I saw you driving this arvo also luke. Did some wierdo wave at you near the maccas at north lakes in a silver astra??
_________________ Shep is a closet jimny lover!!!!
Last edited by Rusho on Tue Aug 10, 2010 9:31 am, edited 1 time in total.
|
|
|
|
 |
Joe

I live here!
Joined: Sat Jul 04, 2009 11:30 pm Posts: 49041 Location: Rockingham W.A
Vehicle: JB74
|
 Posted: Tue Aug 10, 2010 9:31 am |
|
|
Whats a vrs?
Bummer about ya car mate
_________________ Joe likes boobs ( . )( . ) ( ° )( ° )
|
|
|
|
 |
Rusho

Tubby Elfsdong
Joined: Sun Aug 02, 2009 11:30 pm Posts: 6501 Location: Northside, Brisbane
Vehicle: Coily Sierra
|
 Posted: Tue Aug 10, 2010 9:33 am |
|
joseph wrote: Whats a vrs?
Valve regrind set I think it stands for. Head gasket, valve stem seals, cam seal, rocker cover gasket etc etc. Almost everything you need from the head gasket up
_________________ Shep is a closet jimny lover!!!!
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Tue Aug 10, 2010 9:42 am |
|
|
i'd be taking it back to the people that did the work, if they've just put a full VRS kit in maybe they forgot to torque the head properly or fitted the head gasket the wrong way & blocked a water jacket or something....
_________________ You're just hating because you don't understand
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Tue Aug 10, 2010 9:55 am |
|
or maybe a packet of gaskets doesnt fix a single god damn thing if you dont bother to check the serviceability of the head or black faces 
|
|
|
|
 |
Fatzook

az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
 Posted: Tue Aug 10, 2010 10:24 am |
|
Rusho wrote: 2000-3000???
If you do it yourself, I'd say $3k. Depends what you need to buy, and how much you get the motor etc for.
Engine conversions rarely go to plan, so make sure you have more money that what you hope to pay.
I charged $4500 drive in drive out for the last one I did. Suzisport used to charge $6K and use a shitty Link ECU. 
_________________ 2013 GV 1998 SV420 ute
|
|
|
|
 |
stockman

az supporter
Joined: Thu Nov 05, 2009 10:30 pm Posts: 5319 Location: Canberra
Vehicle: 4wd
|
 Posted: Tue Aug 10, 2010 10:45 am |
|
|
So the head was just done and it blew on the way home?
If so take the fucking thing back.
_________________ Watch out or you'll get sued.
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Tue Aug 10, 2010 10:55 am |
|
|
I read it as he just slipped a head gasket in himself
anyone proclaiming to be a mechanic isnt that stupid, likely would be incapable of remembering where work was anyway
|
|
|
|
 |
stockman

az supporter
Joined: Thu Nov 05, 2009 10:30 pm Posts: 5319 Location: Canberra
Vehicle: 4wd
|
 Posted: Tue Aug 10, 2010 10:59 am |
|
|
My bad.
If you still want to sell it either get it fixed or get a cheap replacement engine to drop in.
If you want to man up get a 1.6 (maybe look at getting someone to do it) then keep it.
If you put a 1.6 in it and try to sell it, you won't get your money back.
_________________ Watch out or you'll get sued.
|
|
|
|
 |
matty87
Joined: Sun Oct 25, 2009 10:30 pm Posts: 794 Location: the wild west
Vehicle: 1987 sierra tray back buggy
|
 Posted: Tue Aug 10, 2010 11:31 pm |
|
|
i dont wanna give you the impression that a conversion will be cheap but they dont have to cost that much. if your willing to wait you can pick up a damaged car from a damaged vehicles auction for next to nothing (i got 1 for 600 bucks) the adapter plate etc bout 300 max and a bit of other shit. I know these guys on here know thier stuff but a g16b into a sierra is easy.
|
|
|
|
 |
Rusho

Tubby Elfsdong
Joined: Sun Aug 02, 2009 11:30 pm Posts: 6501 Location: Northside, Brisbane
Vehicle: Coily Sierra
|
 Posted: Tue Aug 10, 2010 11:41 pm |
|
matty87 wrote: i dont wanna give you the impression that a conversion will be cheap but they dont have to cost that much. if your willing to wait you can pick up a damaged car from a damaged vehicles auction for next to nothing (i got 1 for 600 bucks) the adapter plate etc bout 300 max and a bit of other shit. I know these guys on here know thier stuff but a g16b into a sierra is easy.
What did you do for your fuel setup?? Cost?? Miscellaneous expenditure??
_________________ Shep is a closet jimny lover!!!!
|
|
|
|
 |
matty87
Joined: Sun Oct 25, 2009 10:30 pm Posts: 794 Location: the wild west
Vehicle: 1987 sierra tray back buggy
|
 Posted: Wed Aug 11, 2010 12:35 am |
|
Rusho wrote: matty87 wrote: i dont wanna give you the impression that a conversion will be cheap but they dont have to cost that much. if your willing to wait you can pick up a damaged car from a damaged vehicles auction for next to nothing (i got 1 for 600 bucks) the adapter plate etc bout 300 max and a bit of other shit. I know these guys on here know thier stuff but a g16b into a sierra is easy. What did you do for your fuel setup?? Cost?? Miscellaneous expenditure??
fuel setup from the car i brought (baleno) total cost 1200 bucks total for everything.
|
|
|
|
 |
lukes_89
Joined: Fri Sep 25, 2009 11:30 pm Posts: 1204 Location: sunshine coast
|
 Posted: Wed Aug 11, 2010 1:15 am |
|
|
hey guys the old man done the gasket as he has done allot of them in his time and had a mechanic do brakes and timing. i figured it was you rusho and you know whats even worse i just pulled into the servo and filled with 98 and all and got to big fish and bang. so on a tow truck back to north lakes and if i do the g16b i will be keeping it.
|
|
|
|
 |
Rusho

Tubby Elfsdong
Joined: Sun Aug 02, 2009 11:30 pm Posts: 6501 Location: Northside, Brisbane
Vehicle: Coily Sierra
|
 Posted: Wed Aug 11, 2010 1:32 am |
|
|
_________________ Shep is a closet jimny lover!!!!
|
|
|
|
 |
lukes_89
Joined: Fri Sep 25, 2009 11:30 pm Posts: 1204 Location: sunshine coast
|
 Posted: Wed Aug 11, 2010 1:42 am |
|
hahaha at the moment your tempting me hahaha.  you were driving your zook yesturday werent you?
|
|
|
|
 |
Rusho

Tubby Elfsdong
Joined: Sun Aug 02, 2009 11:30 pm Posts: 6501 Location: Northside, Brisbane
Vehicle: Coily Sierra
|
 Posted: Wed Aug 11, 2010 2:33 am |
|
lukes_89 wrote: hahaha at the moment your tempting me hahaha.  you were driving your zook yesturday werent you?
I drive it everyday  Reliable old girl 
_________________ Shep is a closet jimny lover!!!!
|
|
|
|
 |
lauby

az supporter
Joined: Sat Dec 05, 2009 10:30 pm Posts: 254 Location: Gold Coast
Vehicle: 91 Sierra
|
 Posted: Wed Aug 11, 2010 2:41 am |
|
lukes_89 wrote: half way home head gasket went and i think rings and everything else went with it
are you saying the engine is cactus ? maybe confirm the problem, could be a lot cheaper than you think to fix !
|
|
|
|
 |
lukes_89
Joined: Fri Sep 25, 2009 11:30 pm Posts: 1204 Location: sunshine coast
|
 Posted: Wed Aug 11, 2010 3:15 am |
|
|
yeh i havnt had much f a chance to see really whats happened i just know the head gasket went on the drivers side as it dropped all the oil and ou can see where it ran down the block frm the head.
|
|
|
|
 |
|