[diver_dingo]

Does anyone know if there are long range fuel tanks available for 92 swb vitaras? also fuel tank protection plates? with the help of a few rocks i have reduced the fuel capacity of mine...

[Joe]

diver_dingo wrote:

Does anyone know if there are long range fuel tanks available for 92 swb vitaras? also fuel tank protection plates? with the help of a few rocks i have reduced the fuel capacity of mine...

Afaik they dont make them any more witch sucks cause i want one aswell
For a bash plate have a look in here TSOR

[atari4x4]

Polar_Bear has one in his "resto" vit I think it's a long ranger, maybe give them a buzz to see if they'll make one for you.

[Joe]

atari4x4 wrote:

Polar_Bear has one in his "resto" vit I think it's a long ranger, maybe give them a buzz to see if they'll make one for you.

The white one or the new one

Its not on there web site, they only list ones for sierras

[atari4x4]

Joe wrote:

atari4x4 wrote:

Polar_Bear has one in his "resto" vit I think it's a long ranger, maybe give them a buzz to see if they'll make one for you.

The white one or the new one

Its not on there web site, they only list ones for sierras

the white one... aka the Coona or the UFP (Un Finished Project)

[diver_dingo]

might just have to knock somethin up myself. should be a bit of fun, ill have a crack at a cut-and-shut job with another one the same

[Chop]

Brown davis

http://www.browndavis.com.au/navtankmodels.html#suzuki

But i'd say when you hear the costs of long range tanks you'll change ya mind!

Chop

[Bucket]

Chop wrote:

Brown davis

http://www.browndavis.com.au/navtankmodels.html#suzuki

But i'd say when you hear the costs of long range tanks you'll change ya mind!

Chop

Yeah, but at least you know what your getting is a quality product.

[shandy92]

i had a look at Long range tanks, for an additional 20L, you had to pay $900ish.

or you could get a 20L jerry can for roughly $20 and get the same thing. sure it takes up a bit off space, but i think its worth it for save $900.

Mitch

[gregdixon]

Does any one know if the older 5 door vit tanks are the same as a GV SQ625? I would like to get a LR tank and they have one listed for the older vits

[Fatzook]

gregdixon wrote:

Does any one know if the older 5 door vit tanks are the same as a GV SQ625? I would like to get a LR tank and they have one listed for the older vits

No.

AFAIK the SQ tanks are a supid looking thing with weird mounts ets.

The SE416W LWb tanks will fit between the rails, but are very shallow, and very long and wide, so they take up heaps of space without giving much capacity. (55L??)

The SV tanks will also fit under an SQ, but they will be the same shape roughly and the same capacity.( mounts would need to be fabricated to fit any of these tanks to an SQ.

[appsie]

im with the jerry can option and maybe a jerry holder out back.....but im a tight ass.

[gregdixon]

Fatzook wrote:

gregdixon wrote:

Does any one know if the older 5 door vit tanks are the same as a GV SQ625? I would like to get a LR tank and they have one listed for the older vits

No.

AFAIK the SQ tanks are a supid looking thing with weird mounts ets.

The SE416W LWb tanks will fit between the rails, but are very shallow, and very long and wide, so they take up heaps of space without giving much capacity. (55L??)

The SV tanks will also fit under an SQ, but they will be the same shape roughly and the same capacity.( mounts would need to be fabricated to fit any of these tanks to an SQ.

I will stick with jerry's then

[Fatzook]

Sorry, just to clarify.

With some custom mounts you may be able to get an SE416W long range tank under an SQ LWB. But it will most definately foul on the rear axle of an SQ SWB.

I'd get some accurate measurements from the manufacturer before you do anything else.

[Fatzook]

If you can manufacture the mounts PROPERLY yourself, then it may be a viable option. Otherwise this will cost you a truck load for nothing more than a $20 jerry can offers.

[ajsr]

diver_dingo wrote:

might just have to knock somethin up myself. should be a bit of fun, ill have a crack at a cut-and-shut job with another one the same

I used to weld tanks for brown davis, trust me you cant just knock one up without dramas.
I also vote jerry can