[DMAC]

Is their an easy way to remove these little plastic thingys so I can fully strip the door?





Don't know why but I'm struggling with something that should be simple.

[Scrawny]

The lock one unclips from the rod then the rod can be pulled out. The other one may not come apart in one piece, can you disconnect it somewhere else?

[alien]

when i replaced my door handle i used needlenose pliers to destroy it to get it off... while trying to destroy it though it somehow pulled through unharmed! haha

[steak_knife]

alien wrote:

when i replaced my door handle i used needlenose pliers to destroy it to get it off... while trying to destroy it though it somehow pulled through unharmed! haha

Yep that sound's about right..

[want33s]

Dave for the first pic... Stick a large flat blade screwdriver between the black plastic and the rod and twist it. The rod will pull out of the red bit.

The second one you use a small flat blade and open the green clip and then pull the rod out of it.

[DMAC]

Thanks guys i was going about it the wrong way.
Frustrating sometimes when you know it should be simple but just not happening.