auszookers.com • View topic - cleaning out the shed updated 30/9

Board index » Shift It And Find It » Getting rid of stuff

cleaning out the shed updated 30/9

Page 1 of 2

[ 33 posts ]

Go to page 1, 2 Next

Print view

Previous topic | Next topic

Author

Message

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Mon Aug 09, 2010 8:32 am

Time to have a bit of a clean up

vitara 1.6 clutch cable. good condition. just a tear in the rubber on the bottom. $ 15
Drover Headlights n frames X4 $10 each
Vitara steering column with barrel and key $20
Sierra petrol tank $40
Custom rear bar and tow bar suit 2 inch body lift with LED tail lights $100
Vitar dash loom and switches $10
sierra steering box x2 $65 each
WT rear centre. perfect condition $250
NT front centre $100
rear seat out of WT $80
1.3 airbox $20
2 1/2 inch stainless snorkel. made for 1.6 conversion $200
1 ltr transfer case. no switch. $80
1 ltr front tail shaft $40
1.3 spindles and hubs $50 for a pair.

Got more stuff lying around. let me know what you need. have a few sierras here im wrecking. if you need anythin let me know. Stuff located in ballarat Vic, will post smaller items

You do not have the required permissions to view the files attached to this post.

Last edited by finlay113 on Thu Sep 30, 2010 8:14 am, edited 7 times in total.

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Mon Aug 09, 2010 8:33 am

Snake racing stuff and custom bar is to suit sierra

ajsr

az supporter

Joined: Sun Dec 28, 2008 10:30 pm
Posts: 3712
Location: melb

Posted: Mon Aug 09, 2010 8:35 am

ill take the starter if its good
cheers andrew

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Mon Aug 09, 2010 8:37 am

No worries. Starter was fine

rpmwrx

az supporter

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 1303
Location: Geelong
Vehicle: JK Jeep, Sierra & Raptor

Posted: Mon Aug 09, 2010 8:37 am

i may be interested in the rear bar...

would you be able to post some pics?

thanks...

Ross

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Mon Aug 09, 2010 8:39 am

Yeah I'll put a pic up shortly

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Mon Aug 09, 2010 9:31 am

some pics
roll bar to suit high top $180 SOLD
wheel bearing kit. pretty sure it suits NT $40
vitara dash $40

You do not have the required permissions to view the files attached to this post.

Last edited by finlay113 on Thu Sep 23, 2010 5:29 am, edited 1 time in total.

819FKA

Joined: Sun Apr 18, 2010 11:30 pm
Posts: 192
Location: Brisbane Northside

Posted: Mon Aug 09, 2010 10:20 am

pics of high steer arm???

_________________
819FKA has Been UNLEASHED

neofitou

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 1088
Location: Melbourne
Vehicle: 00 Jimny, 63 Haffy

Posted: Mon Aug 09, 2010 10:21 am

Got any wide track diffs (end to end) in those sierras you are wrecking?

bogfrog

az supporter

Joined: Mon Dec 29, 2008 10:30 pm
Posts: 596
Location: Mt Evelyn Vic

Posted: Mon Aug 09, 2010 10:22 am

Snake racing tail shaft spacer $30

WT or NT spacing? thickness?

_________________
Bitumen...Another waste of public funds!

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Mon Aug 09, 2010 10:25 am

819FKA wrote:

pics of high steer arm???

the snake racing high steer is a whole new casting. knuckle and steering arm. dont habve pics. have a look on the snake racign website. or i can take some tomorrow.

the tail shaft spacer is approx 10-11mm. out of a narrow track. but its got 2 sets of wholes. the other wholes are bigger so ill check if it mates up to a WT shaft for you. ill measure prop tomorrow.

and both the sierras are NT sorry

bogfrog

az supporter

Joined: Mon Dec 29, 2008 10:30 pm
Posts: 596
Location: Mt Evelyn Vic

Posted: Mon Aug 09, 2010 10:27 am

Cool

i'll take the spacer then cheers, PM comin' your way! :wink:

_________________
Bitumen...Another waste of public funds!

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Mon Aug 09, 2010 10:31 am

no worries

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Tue Aug 10, 2010 1:36 am

bump. need room in the shed

birko

az supporter

Joined: Sun Jun 07, 2009 11:30 pm
Posts: 573
Location: Perth WA

Posted: Tue Aug 10, 2010 9:50 am

Wt dash cluster?

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Tue Aug 10, 2010 9:58 am

Both vehicles areNT

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Wed Aug 11, 2010 2:36 am

snakre racing high steer kit is same as this $950 from snake racing

You do not have the required permissions to view the files attached to this post.

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Sat Aug 14, 2010 11:37 am

Bump

pinz6x6

Joined: Thu Jul 23, 2009 11:30 pm
Posts: 36
Location: ballarat, VIC

Posted: Sat Aug 14, 2010 11:54 am

Have you got a pair of doors and windscreen surround?

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Sat Aug 14, 2010 12:28 pm

I have a cOuple of doors. Not real good though. No window surround

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Tue Aug 17, 2010 4:27 am

price updates. still got lots of spares to get rid off. let me know what you need

imatt

Joined: Tue May 25, 2010 9:04 am
Posts: 72
Location: Ballan

Posted: Wed Aug 18, 2010 10:59 am

Do you have an ignition barrel and key for sierra/drover? Also do you have a timing belt cover for 1.3l in good cond?
Cheers Matt

_________________
1985 Holden Drover, soon to be modified

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Wed Aug 18, 2010 1:05 pm

no barrel n keys. im pretty sure i have a timing cover. ill check tomorrow

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Thu Sep 23, 2010 5:19 am

bump

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Thu Sep 30, 2010 8:16 am

bummp

maloo11

Joined: Tue Jul 27, 2010 6:17 am
Posts: 232
Location: NSW

Posted: Thu Sep 30, 2010 9:09 am

Steering boxes in good order?

_________________
91Sierra; 2in lift; 2inBL; 6.5s; 31muds;

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Thu Sep 30, 2010 9:17 am

Yeah mate

redrocketsj50

az supporter

Joined: Wed May 19, 2010 9:20 am
Posts: 268
Location: Sale victoria

Posted: Thu Sep 30, 2010 12:49 pm

how much posted for the snorkle to 3850 sale ,victoria

_________________
Sj80,31 claws, lift, winch, 6.5

Proxy

az supporter

Joined: Wed Sep 22, 2010 3:06 am
Posts: 248
Location: Giralang, ACT
Vehicle: 1995 Suzuki Vitara JX LWB G16B

Posted: Fri Oct 15, 2010 8:04 pm

my steering's no good when the wheel is in the middle, would a steering box cure this as the steering is fine otherwise,

if so would you post to WA 6104?

cheers

_________________
89 Sierra (Crashed)
95 Vitara (Current)

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Fri Oct 15, 2010 8:44 pm

Proxy wrote:

my steering's no good when the wheel is in the middle, would a steering box cure this as the steering is fine otherwise,

if so would you post to WA 6104?

cheers

Have you tried to tighten the adjusting screw on top of the box? and whats your steering damper like?

B4T

_________________
B4T

Built by me to be driven like a rental

Page 1 of 2

[ 33 posts ]

Go to page 1, 2 Next

Board index » Shift It And Find It » Getting rid of stuff

Who is online

Users browsing this forum: No registered users and 10 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum