| Author |
Message |
mrw82

az supporter
Joined: Tue Jul 03, 2007 11:30 pm Posts: 1350 Location: stuck in a hole. not off road, just deception bay.
Vehicle: snotbox, 84 LWB sierra 1 litre
|
 Posted: Sat Mar 29, 2008 4:50 am |
|
|
I have just finished pulling the bottom load leaf from the rears of my LWB sierra. didn't want to make it too soft because its a ute and i need a bit of load carrying capacity still. (for camping and trips to the tip etc...) going for a galss house run on sunday so I will let you's know how it goes. hoping for a lot more flex, then i'll do the front end.
very easy job to do, but for anyone thinking of trying it clean up the u bolt threads as best as you can, i hit mine with a wire brush but didn't see the end of one of them was burred over, started to bind up and gave me a hell of a time. the rest were all easy as.
|
|
|
|
 |
CairnsZook

az supporter
Joined: Tue Jul 18, 2006 11:30 pm Posts: 872 Location: West Coast
Vehicle: Zookless
|
 Posted: Sat Mar 29, 2008 9:30 pm |
|
I just pulled another leaf out of the rear today. Now she is a dream to drive.
I have no rear seats in at the moment and rarely carry much either, so have no real need for load carrying capability. If the rear seats go back in, I'll probably put the leaves I pulled from the front into the rear, as they are a little shorter.
Can't wait to see how she goes off road. 
|
|
|
|
 |
GRPABT1
Joined: Mon Nov 19, 2007 10:30 pm Posts: 731 Location: Townsville
Vehicle: 88 SWB WT Sierra soft top ute
|
 Posted: Sat Mar 29, 2008 10:17 pm |
|
|
Has anyone ever run airbags or anything to suppliment the adverse cornering disability when going really soft? Cause I'm getting the shits trying not to bloody roll my zook lol.
|
|
|
|
 |
Damo

az supporter
Joined: Sat Jul 22, 2006 11:30 pm Posts: 4661 Location: Brisbane
|
 Posted: Sat Mar 29, 2008 10:32 pm |
|
GRPABT1 wrote: Has anyone ever run airbags or anything to suppliment the adverse cornering disability when going really soft? Cause I'm getting the shits trying not to bloody roll my zook lol.
I had some really soft springs in the back of mine at one stage, I was having the same probs as you and was thinking of putting a 1 litre swaybar in the back. I reckon it would work.
_________________ SJ50.4.LYF
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Sat Mar 29, 2008 10:34 pm |
|
|
I reckon it would be too stiff and oversteer city
I reckon if your leafs and shocks are so soft that body roll is scary you will fair shit yourself first time you are doing a steep rutted climb and bump and big rut
|
|
|
|
 |
GRPABT1
Joined: Mon Nov 19, 2007 10:30 pm Posts: 731 Location: Townsville
Vehicle: 88 SWB WT Sierra soft top ute
|
 Posted: Sun Mar 30, 2008 5:12 pm |
|
|
It's not scary bad just annoying, my other car is VN commodre built for circuit racing. So you can imagine how annoying it is going from that to the zook in the city. It's not bad enough to warrant me worrying about it now as there are other things alot further up the wish list but I was just thinking for the future.
|
|
|
|
 |
mrw82

az supporter
Joined: Tue Jul 03, 2007 11:30 pm Posts: 1350 Location: stuck in a hole. not off road, just deception bay.
Vehicle: snotbox, 84 LWB sierra 1 litre
|
 Posted: Mon Mar 31, 2008 9:11 pm |
|
|
well i didn't get to test mine off road on the weekend due to carby problems. so once i get that sorted out i'll let you know how it is. its definately softer on road though, but not too soft its still good to drive. (for a zook anyway)
|
|
|
|
 |
andrewa
Joined: Fri Aug 25, 2006 11:30 pm Posts: 278 Location: bundamba
|
 Posted: Sun Apr 06, 2008 6:43 pm |
|
ok guys, took my first step in sorting my suspension. replaced my extended shackles with std ones but left nolathane bushes. the result is a much better ride straight off. lost almost an inch in height but at least the zook handles better on road.
andrewa. 
|
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Sun Apr 06, 2008 6:46 pm |
|
did you take any leaves out yet? I remember you having about leaves in each pack 
|
|
|
|
 |
andrewa
Joined: Fri Aug 25, 2006 11:30 pm Posts: 278 Location: bundamba
|
 Posted: Mon Apr 07, 2008 1:01 am |
|
not yet steve. it takes me awhile to get things done but i eventually get there. 
|
|
|
|
 |
andrewa
Joined: Fri Aug 25, 2006 11:30 pm Posts: 278 Location: bundamba
|
 Posted: Wed Apr 30, 2008 1:50 am |
|
just a couple of pics of suspension flex since fitting std shackles. no leaves removed. tyres are cutting up with up travel now so might leave spring packs as they are for now.
cheers andrewa.
You do not have the required permissions to view the files attached to this post.
|
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Wed Apr 30, 2008 10:15 am |
|
flex looks ok andrew 
|
|
|
|
 |
Damo

az supporter
Joined: Sat Jul 22, 2006 11:30 pm Posts: 4661 Location: Brisbane
|
 Posted: Wed Apr 30, 2008 12:18 pm |
|
andrewa wrote: tyres are cutting up with up travel now so might leave spring packs as they are for now.
Maybe do a little trimming or just shim the bumpstops down a little.
_________________ SJ50.4.LYF
|
|
|
|
 |
andrewa
Joined: Fri Aug 25, 2006 11:30 pm Posts: 278 Location: bundamba
|
 Posted: Thu May 01, 2008 2:27 am |
|
might look at doing bodylift in near future as well when time and money allows.
andrew.
|
|
|
|
 |
CairnsZook

az supporter
Joined: Tue Jul 18, 2006 11:30 pm Posts: 872 Location: West Coast
Vehicle: Zookless
|
 Posted: Thu May 01, 2008 3:20 am |
|
Here's my front bumpstop spacer too. Just some box section I found at the local scrap yard, couple of holes drilled through it and longer bolts.

Last edited by CairnsZook on Sun Jul 26, 2009 9:57 pm, edited 1 time in total.
|
|
|
|
 |
seen
Joined: Mon Mar 03, 2008 10:30 pm Posts: 313 Location: ipswich
Vehicle: 30s front locker barwork
|
 Posted: Sat Aug 30, 2008 12:33 pm |
|
|
if i hav a 2inch lift should i extend my bumstops ccoz they dont hit on full flex
|
|
|
|
 |
Brett

az supporter
Joined: Tue May 27, 2008 11:30 pm Posts: 1791 Location: Central coast NSW
|
 Posted: Sat Aug 30, 2008 1:14 pm |
|
|
i'd be pulling a leaf so it does flex more and bumpstops
|
|
|
|
 |
seen
Joined: Mon Mar 03, 2008 10:30 pm Posts: 313 Location: ipswich
Vehicle: 30s front locker barwork
|
 Posted: Sun Aug 31, 2008 3:40 pm |
|
|
wat leaves do u reacon i pull out or wat hav other people been doin
|
|
|
|
 |
Brett

az supporter
Joined: Tue May 27, 2008 11:30 pm Posts: 1791 Location: Central coast NSW
|
 Posted: Sun Aug 31, 2008 7:11 pm |
|
|
the bottom leaf all round and just work it out from there.
|
|
|
|
 |
seen
Joined: Mon Mar 03, 2008 10:30 pm Posts: 313 Location: ipswich
Vehicle: 30s front locker barwork
|
 Posted: Mon Sep 01, 2008 9:24 pm |
|
|
i wouldnt pull the load leaf out the back should i
|
|
|
|
 |
Brett

az supporter
Joined: Tue May 27, 2008 11:30 pm Posts: 1791 Location: Central coast NSW
|
 Posted: Mon Sep 01, 2008 11:10 pm |
|
|
put a some pics up of your spring packs and it will be easyer to help you. most of the time the load leaf is the 1st to go.
|
|
|
|
 |
seen
Joined: Mon Mar 03, 2008 10:30 pm Posts: 313 Location: ipswich
Vehicle: 30s front locker barwork
|
 Posted: Mon Sep 01, 2008 11:38 pm |
|
|
okay i will take some tomorrow on the rear sprong hanger there is like a braket thing that stops the shackle if i took it of would that help down travel or do i hav to hav it there
|
|
|
|
 |
seen
Joined: Mon Mar 03, 2008 10:30 pm Posts: 313 Location: ipswich
Vehicle: 30s front locker barwork
|
 Posted: Wed Sep 03, 2008 10:39 pm |
|
|
here is a pic of my rear springs i hav 5 in the back n 4 in the front but i want to leave my front as is for now bcoz i am getin a winch n winch bar so i dont no how heavy that will be
|
|
|
|
 |
seen
Joined: Mon Mar 03, 2008 10:30 pm Posts: 313 Location: ipswich
Vehicle: 30s front locker barwork
|
 Posted: Wed Sep 03, 2008 11:07 pm |
|
|
here is those pics i hav 5 in the rea n 4 in the front but i want to leave the front as i am getin a winch real soon
You do not have the required permissions to view the files attached to this post.
|
|
|
|
 |
Brett

az supporter
Joined: Tue May 27, 2008 11:30 pm Posts: 1791 Location: Central coast NSW
|
 Posted: Wed Sep 03, 2008 11:59 pm |
|
|
yep pull the bottom leaf out.
|
|
|
|
 |
3cyl
Joined: Tue Jan 29, 2008 10:30 pm Posts: 2054 Location: Ipswich
|
 Posted: Thu Sep 04, 2008 8:42 pm |
|
|
Be careful that your U-bolts still do up properly ie: threads clean and still long enough when you remove leaves as your spring will get narrower and nuts need to run further up the U-bolts.
_________________ awesome only comes in 2 colours, camo & bare metal
|
|
|
|
 |
Damo

az supporter
Joined: Sat Jul 22, 2006 11:30 pm Posts: 4661 Location: Brisbane
|
 Posted: Thu Sep 04, 2008 8:45 pm |
|
|
While you have them out give them a cleanup. Royce had some tips about tuning leaf springs for better wheel travel, do a search on that.
_________________ SJ50.4.LYF
|
|
|
|
 |
|