auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

steering box

Page 1 of 1

[ 14 posts ]

Print view

Previous topic | Next topic

Author

Message

Nagz

Joined: Tue Nov 02, 2010 4:22 am
Posts: 231
Location: Sydney

Posted: Thu Dec 23, 2010 11:48 pm

hey guys im half way thru doing my steering box but i cant get the steering arm to come off. does any one have any tips for me .....im thinking about just cuttin the stupid thing off with the grinder ..... im also pissed at it lol.

Any help would be great.

tanshi

az supporter

Joined: Tue Jan 09, 2007 10:30 pm
Posts: 7717
Location: Brisbane

Posted: Thu Dec 23, 2010 11:53 pm

the pitman arm?

buy a puller. they can be a bitch to get off.

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Thu Dec 23, 2010 11:55 pm

Pitman arm puller.
Bearing puller.
Hyd bearing puller.

Tapping whith a hammer helps with these options

Heat also helps with these options

Or if you have a spare off already, grind a slot in the shit one, Then BFH

_________________

BlueSuzy wrote:

I'm over the G16b's.

Nagz

Joined: Tue Nov 02, 2010 4:22 am
Posts: 231
Location: Sydney

Posted: Fri Dec 24, 2010 12:03 am

whats a pitman puller worth

tanshi

az supporter

Joined: Tue Jan 09, 2007 10:30 pm
Posts: 7717
Location: Brisbane

Posted: Fri Dec 24, 2010 12:08 am

super cheap.

the price will vary

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Fri Dec 24, 2010 12:15 am

Did you know you can shop online? http://www.supercheapauto.com.au/online ... ?pid=12554

_________________

BlueSuzy wrote:

I'm over the G16b's.

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Fri Dec 24, 2010 12:20 am

Get a heavy lump hammer and hit the edge of the pitman arm around where the tappered shaft of the ball joint is. Don't hit the joint, just hit the end of the pitman arm. The shock loading may free it up. You won't need to put your back into it, but 10 or 20 good firm hits should see it come free. If that fails, you'll need a tie rod puller :cry:

_________________
2013 GV
1998 SV420 ute

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Fri Dec 24, 2010 12:53 am

OH i read it as pitman arm. LOL

Normally a big bit of bar down through engine bay and a good hammer will knock it out. May damage thread alittle if your hitting the thread. but its just the end. Fix with a file.

_________________

BlueSuzy wrote:

I'm over the G16b's.

neofitou

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 1088
Location: Melbourne
Vehicle: 00 Jimny, 63 Haffy

Posted: Fri Dec 24, 2010 1:36 am

At $52 you might be better off getting a bearing puller, they arent much more and are more flexible. I used borrowed one several times when doing my power steering. did the job well.

Nagz

Joined: Tue Nov 02, 2010 4:22 am
Posts: 231
Location: Sydney

Posted: Fri Dec 24, 2010 2:30 am

thanks heaps for the help lads, ended up going for the pitman arm and also went and got the puller, all up i think 3.5 hrs lol i couldnt beleive it i have changed gearboxes quicker than that. Was also going to do the diff breathers, but i cant be F#%ed

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Fri Dec 24, 2010 3:56 am

BlueSuzy wrote:

OH i read it as pitman arm. LOL

Normally a big bit of bar down through engine bay and a good hammer will knock it out. May damage thread alittle if your hitting the thread. but its just the end. Fix with a file.

Me too...

_________________
I used to be indecisive,
now I'm not so sure.....

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Fri Dec 24, 2010 4:51 am

ah so it was the pitman arm.. :lol:

_________________

BlueSuzy wrote:

I'm over the G16b's.

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Fri Dec 24, 2010 4:55 am

BlueSuzy wrote:

ah so it was the pitman arm.. :lol:

That has to come off to "re-build" the box....

_________________
I used to be indecisive,
now I'm not so sure.....

Nagz

Joined: Tue Nov 02, 2010 4:22 am
Posts: 231
Location: Sydney

Posted: Fri Dec 24, 2010 7:45 pm

wow its like driving a different car now hahahahah ....except my steering wheel is on the piss

Page 1 of 1

[ 14 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 414 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum