| Author |
Message |
mayday
Joined: Sat Oct 27, 2007 11:30 pm Posts: 30 Location: Perth
|
 Posted: Tue Jan 04, 2011 7:59 am |
|
|
Just went to buy a fuel filter for the zook but repco's books has the normal plastic filter listed but it's actually metal and totally different size etc. Any one else have this problem? I got the closest one he could find but it's a different diameter. Plus it was $52!!
Cheers
_________________ 96 Coily
|
|
|
|
 |
Rusho

Tubby Elfsdong
Joined: Sun Aug 02, 2009 11:30 pm Posts: 6501 Location: Northside, Brisbane
Vehicle: Coily Sierra
|
 Posted: Tue Jan 04, 2011 8:09 am |
|
mayday wrote: Just went to buy a fuel filter for the zook but repco's books has the normal plastic filter listed but it's actually metal and totally different size etc. Any one else have this problem? I got the closest one he could find but it's a different diameter. Plus it was $52!!
Cheers
Hope you kept the reciept?? Take it back and just get a cheap plastic inline filter. I removed the one from the rear and placed the plastic one closer to the carby in the engine bay. The idiot at Repco should have suggested that rather than selling you a $52 filter 
_________________ Shep is a closet jimny lover!!!!
|
|
|
|
 |
mayday
Joined: Sat Oct 27, 2007 11:30 pm Posts: 30 Location: Perth
|
 Posted: Tue Jan 04, 2011 8:17 am |
|
|
Yeah I might take it back in the morn. So you think I should just use the normal placky filter and zip tie it to the chassis?
_________________ 96 Coily
|
|
|
|
 |
Rusho

Tubby Elfsdong
Joined: Sun Aug 02, 2009 11:30 pm Posts: 6501 Location: Northside, Brisbane
Vehicle: Coily Sierra
|
 Posted: Tue Jan 04, 2011 8:30 am |
|
I did this...
You get the idea  I think i just joined mine straight through where the factory type filter went
_________________ Shep is a closet jimny lover!!!!
|
|
|
|
 |
31zook
Joined: Tue Mar 24, 2009 10:30 pm Posts: 9242 Location: maito
Vehicle: <3 Edna <3
|
 Posted: Tue Jan 04, 2011 8:41 am |
|
a 92 corolla has the filler come in from the bottom and the exit on the side like a sierra, so it's an even better fit 
|
|
|
|
 |
coily96

az supporter
Joined: Wed May 05, 2010 11:50 am Posts: 823 Location: Beenleigh
Vehicle: Coil Sierra
|
 Posted: Tue Jan 04, 2011 8:49 am |
|
|
|
 |
mayday
Joined: Sat Oct 27, 2007 11:30 pm Posts: 30 Location: Perth
|
 Posted: Tue Jan 04, 2011 2:56 pm |
|
|
Thanks for the help guys. I'm just going to fit the plastic filter in the orig position for now as i'm going up the coast tomorrow. Then might siet it up in the bay when I get back. Damn coilies and non interchangeable bits!
_________________ 96 Coily
|
|
|
|
 |
Taylor74
Joined: Fri Dec 24, 2010 10:26 am Posts: 198 Location: Perth WA
|
 Posted: Tue Jan 04, 2011 11:57 pm |
|
|
SJ80s went to an EFI style filter, which going on all the carby issues that zuks can have due to dirty fuel was a good ides, The $10 plastic filter works much like rice strainer compaired to the EFI style the coily uses.
Suzistore sells the correct filter for $44
_________________ Suzuki is my way of life.
|
|
|
|
 |
Teracis
Joined: Sat Dec 11, 2010 10:03 pm Posts: 2261 Location: Gold Coast
Vehicle: Daisy
|
 Posted: Wed Jan 05, 2011 5:49 am |
|
Speaking of fuel filters, how do you guys think one of the removable/replaceable cartridge type watertrap/fuel filters would go on a carbied sierra?
Something like this Supercheap Ryco Marine Filter
I wouldn't buy it from there because it doesn't come with the fittings. I used to have something similar in my jetski which I bought from cheapa auto spares and it was good, I have something similar in the boat and when I put that in the boat mechanic told me that it would be causing the trouble I was having with my jetski (not sucking through properly as it's only a 2cyl 750cc) and I thought I'd see what you guys think about the 1300 sucking through a decent filter like that.
I only ask because the trouble I'd been having with my zook was due to water in the fuel. Fuel is pretty crap nowdays and it'd be nice to have a serious filter on there.
|
|
|
|
 |
|