auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

vitara on 31's

Page 1 of 1

[ 15 posts ]

Print view

Previous topic | Next topic

Author

Message

Brett

az supporter

Joined: Tue May 27, 2008 11:30 pm
Posts: 1791
Location: Central coast NSW

Posted: Sun Jan 16, 2011 10:14 am

well i got bored and thought i'd get ready one of the vitaras at work for the 31's. here is how i went.

started but cutting the rear guards and folding them up, pulled the front bumper of because it had no chance of turning with it on.

You do not have the required permissions to view the files attached to this post.

Brett

az supporter

Joined: Tue May 27, 2008 11:30 pm
Posts: 1791
Location: Central coast NSW

Posted: Sun Jan 16, 2011 10:20 am

how it sits on the 31's with no lift, no front bar.

i'll putting a extended bump stop in the rear that will about 25- 30 mm as its just staring to rub and has about 10 mm till the bump stops touches.

the front clears the outside guard but just touches the fire wall and inside where the plastic guard liner was bolted to. this is lock to lock and i was quite surprised that it does not need grinding. front is on the bump stops so a hammer will fix the inner and wall.

You do not have the required permissions to view the files attached to this post.

Last edited by Brett on Sun Jan 16, 2011 10:24 am, edited 1 time in total.

95sierra

Joined: Thu Dec 30, 2010 10:36 am
Posts: 65
Location: Brisbane

Posted: Sun Jan 16, 2011 10:23 am

Nice mate. Looks the goods!

Zach

Joe

I live here!

Joined: Sat Jul 04, 2009 11:30 pm
Posts: 49041
Location: Rockingham W.A
Vehicle: JB74

Posted: Sun Jan 16, 2011 11:34 am

Will look good with a front bar on

_________________
Joe likes boobs ( . )( . ) ( ° )( ° )

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Sun Jan 16, 2011 7:14 pm

X2 joe, looks low and fat

jesse_vit

az supporter

Joined: Wed Sep 22, 2010 8:57 am
Posts: 324
Location: Gold Coast
Vehicle: stock yellow vit.

Posted: Mon Jan 17, 2011 7:13 am

how do they go with the gearing?
or have you changed the gearing drom stock?

Brett

az supporter

Joined: Tue May 27, 2008 11:30 pm
Posts: 1791
Location: Central coast NSW

Posted: Mon Jan 17, 2011 9:14 am

the car is a auto, but to tell you the truth it drives better( gearing) than the other one i have on 235 that is a manual

stocker

Joined: Wed Dec 08, 2010 7:16 am
Posts: 941
Location: Shidoni!

Posted: Mon Jan 17, 2011 9:23 am

:S whats the difference in gearing ratio's between Auto and manual???

_________________
Stocker

shandy92

az supporter

Joined: Tue Nov 25, 2008 10:30 pm
Posts: 5066
Location: perth, Australia

Posted: Mon Jan 17, 2011 12:29 pm

awesome job, wouldnt mind doing this to mine one day...one day.

what did u do with the inner guards? any photos of the inners would be great

cheers
Mitch

Brett

az supporter

Joined: Tue May 27, 2008 11:30 pm
Posts: 1791
Location: Central coast NSW

Posted: Mon Jan 17, 2011 4:59 pm

i'll grab some this arvo but all i did was get a 2 pound hammer and asked it nicely to move out of the way

shandy92

az supporter

Joined: Tue Nov 25, 2008 10:30 pm
Posts: 5066
Location: perth, Australia

Posted: Tue Jan 18, 2011 6:48 am

Brett wrote:

i'll grab some this arvo but all i did was get a 2 pound hammer and asked it nicely to move out of the way

ahaha is that a nice way of saying that you abused the crap out of it?
doesnt the inner guard clip in? i thought it did, just wondering where its clipped to now? or have i got it completely wrong?

Mitch

Brett

az supporter

Joined: Tue May 27, 2008 11:30 pm
Posts: 1791
Location: Central coast NSW

Posted: Tue Jan 18, 2011 7:26 am

the inner plastic bit is in the bin. the inner guard that the plastic clips on to is what i took the hammer to

shandy92

az supporter

Joined: Tue Nov 25, 2008 10:30 pm
Posts: 5066
Location: perth, Australia

Posted: Tue Jan 18, 2011 7:42 am

Brett wrote:

the inner plastic bit is in the bin. the inner guard that the plastic clips on to is what i took the hammer to

ahaha ok makes more sense. pics please

shandy92

az supporter

Joined: Tue Nov 25, 2008 10:30 pm
Posts: 5066
Location: perth, Australia

Posted: Mon Jan 24, 2011 10:15 am

any chance of those pics??

got_bar_work

Joined: Sat May 15, 2010 8:30 pm
Posts: 2214
Location: Brisbane
Vehicle: SQ625

Posted: Mon Jan 24, 2011 9:52 pm

When I did my front i folded the inner lip flat out in to the void then folded the outer skin in to the void then just screwed the plastic bit back on
Can't even tell it's been done

Page 1 of 1

[ 15 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 640 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum