[tom__]

Searched with no luck.

Can anyone tell me how to remove the window winder from the inside of the door on the sierra.

Thanks

[christover1]

It has a funny clip thing behind the plastic sleeve.
It locks into 2 grooves across the spline.
It should pull out fairly easy,
but it can disappear into the blue yonder and never be seen again

[christover1]

[zook95]

use pliers or something to get the circlip off and it will just pull of then

[atari4x4]

use the seat belt or a the edge of a tee shirt & slide the edge around between the door trim & the winder, yes it will fly across the shed.

[tom__]

i couldn't see a circlip. will have another look in a sec as the car is at work.

[tom__]

it appears there is no circlip there or even anywhere that on would sit. The handle just came straight off the spline with some gentle persuading.

Thanks for the help anyway.

[shakes]

christover1 wrote:

but it can disappear into the blue yonder and never be seen again

hence known as a jesus clip..
"jesus where the hell did that go?"

[cairns27]

a use an old T shirt or similar the clip should stay with the rag when removed you might need a small screw driver to get the rag under the plastic doever the pointer bits of the clip normally face towards the handle