It is currently Sat Aug 01, 2026 11:34 pm
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 49 posts ]  Go to page Previous  1, 2
Author Message

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Fri Apr 29, 2011 11:21 am 
Reply with quote Top  
Someone told me that by putting a snorkel on i would get better economy but im getting the opposite. I just love hearing the throaty induction noise so any chance of economy is out the window :thefinger:

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Post Posted: Fri Apr 29, 2011 9:38 pm 
Reply with quote Top  
Built4thrashing wrote:
Someone told me that by putting a snorkel on i would get better economy but im getting the opposite. I just love hearing the throaty induction noise so any chance of economy is out the window :thefinger:


that's cause the ATS (air temp sen) is now getting colder air running across it, if you move it further up the intake you should be able to get it close to what it was..

_________________
I used to be indecisive,
now I'm not so sure.....

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Feb 17, 2010 10:30 pm
Posts: 178
Location: Adelaide

Post Posted: Sat Apr 30, 2011 1:57 am 
Reply with quote Top  
DR_JOSH wrote:
Awesome, they are only asking $8000 for it, so I will be sure to have a good double check over everything when I go back there tomorrow.

Cheers for your help


,Righto not buying that one, just took it for a test drive. Gave it a bit of stick down a back street, went alright but noticed it was blowing smoke up the top end, thought maybe it was just steem as it was cold and had just started raining but when I stopped to give the misses a drive I noticed it was still smoking at idle, so I got down and gave it a sniff. Yup it's burning oil at idle.

OffTo the next one we go, a 98 model for the same price

 Profile  

Offline
az supporter
az supporter

Joined: Thu Mar 26, 2009 10:30 pm
Posts: 10453
Location: Perth, Australia
Vehicle: Jeep

Post Posted: Sat Apr 30, 2011 4:13 am 
Reply with quote Top  
DR_JOSH wrote:
DR_JOSH wrote:
Awesome, they are only asking $8000 for it, so I will be sure to have a good double check over everything when I go back there tomorrow.

Cheers for your help


,Righto not buying that one, just took it for a test drive. Gave it a bit of stick down a back street, went alright but noticed it was blowing smoke up the top end, thought maybe it was just steem as it was cold and had just started raining but when I stopped to give the misses a drive I noticed it was still smoking at idle, so I got down and gave it a sniff. Yup it's burning oil at idle.

Off To the next one we go, a 98 model for the same price


Ahhh ok, well good decision... a 98 for the same price as a 02... i would be getting that price reduced... :wink: :D

 Profile WWW  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Sat Apr 30, 2011 6:37 am 
Reply with quote Top  
A 98 model is easier to mod. No abs or airbags to worry about.

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
az supporter
az supporter

Joined: Thu Mar 26, 2009 10:30 pm
Posts: 10453
Location: Perth, Australia
Vehicle: Jeep

Post Posted: Sat Apr 30, 2011 6:54 am 
Reply with quote Top  
Built4thrashing wrote:
A 98 model is easier to mod. No abs or airbags to worry about.


Agreed, the earlier models are easier to mod... maybe try and find a 2000 model, pretty sure they were the last not to have airbags... my 01 only has airbags, no ABS... cant imagine what the new GV's are like to mod, if you can find mods for them... :lol: :wink:

 Profile WWW  

Offline
az supporter
az supporter
User avatar

Joined: Wed Feb 17, 2010 10:30 pm
Posts: 178
Location: Adelaide

Post Posted: Sat Apr 30, 2011 7:27 am 
Reply with quote Top  
Not worried at all about mods, plus that '02 model was cheaper then all the rest on the market here in SA by a few grand, it shows why.

The 98 we looked at was really nice, drove better then the '02 shifted gears nicer and felt a lot smoother on the road, the interior was just friggin ugly. Still going to keep looking

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Sat Apr 30, 2011 8:09 am 
Reply with quote Top  
MacBear wrote:
Built4thrashing wrote:
A 98 model is easier to mod. No abs or airbags to worry about.


Agreed, the earlier models are easier to mod... maybe try and find a 2000 model, pretty sure they were the last not to have airbags... my 01 only has airbags, no ABS... cant imagine what the new GV's are like to mod, if you can find mods for them... :lol: :wink:


You can get front nudge bars, bull bars, winch bars, suspension lifts, snorkels, racks, side steps even dual battery kits. Ive got a 2008 model and have done a 45mm lift and fitted 225/75/16 BFG all terians.


My 2000 GV still shits all over it off road.

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun May 03, 2009 11:30 pm
Posts: 646
Location: Melbourne

Post Posted: Sun May 01, 2011 11:57 am 
Reply with quote Top  
MacBear wrote:
Built4thrashing wrote:
A 98 model is easier to mod. No abs or airbags to worry about.


Agreed, the earlier models are easier to mod... maybe try and find a 2000 model, pretty sure they were the last not to have airbags... my 01 only has airbags, no ABS... cant imagine what the new GV's are like to mod, if you can find mods for them... :lol: :wink:


I have an '01 model - has air bags but no abs.....don't see air bags being a problem though as i dont intend to fit a body lift. If your not interested in a body lift then it shouldn't make any difference. :wink:

_________________
My Grand Vitara

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Mon May 02, 2011 7:38 am 
Reply with quote Top  
Air bags can be a problem if fitting a bullbar or fitting/making a winch bar. Not all winch bars are airbag compatable and the ones that are cost a small fortune.

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun May 03, 2009 11:30 pm
Posts: 646
Location: Melbourne

Post Posted: Mon May 02, 2011 1:24 pm 
Reply with quote Top  
ahhh...yeah...forgot about that :roll: :lol:

Not everyone's worried about that though :wink: :lol:

_________________
My Grand Vitara

 Profile  

Offline
User avatar

Joined: Tue Nov 04, 2008 10:30 pm
Posts: 1241
Location: Antarctica!

Post Posted: Wed May 18, 2011 11:35 pm 
Reply with quote Top  
I haven't worked out my actual economy yet, but I drove my V6 99 GV from Brisbane to Shepparton yesterday with the back seats down and fully loaded to the roof and even with all of the mods including snorkel, 5.12's, 265/70R16 AT's and body lift etc etc, I still managed to get 630km out of a full tank.
I'm impressed!

_________________
If your not breaking shit, try harder!!!


Last edited by Mugwui on Thu May 19, 2011 1:56 am, edited 1 time in total.
 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Thu May 19, 2011 12:41 am 
Reply with quote Top  
That's awesome. Maybe I should leave my window shut and crank the stereo up so I can't hear the induction noise.

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Feb 17, 2010 10:30 pm
Posts: 178
Location: Adelaide

Post Posted: Tue May 31, 2011 9:38 pm 
Reply with quote Top  
Well finally made a purchase after looking at about 8 different cars, ended up with a 98 model. Picking it up tomorrow, ended up buying a dealer car and I hate buying from dealers but it was the best one we looked at in our price range and atleast it comes with a 3 month warranty

cheers for all the help

Image

Image

Probably the only one we looked at that didnt have severely yellow headlights. Although they did have a slight tinge, Can these be pulled apart and cleaned up?
Image

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun Dec 28, 2008 10:30 pm
Posts: 1017
Location: Perth
Vehicle: 2004 SQ625 GV

Post Posted: Tue May 31, 2011 11:18 pm 
Reply with quote Top  
I find mine tarnish after a while so I use some plastic polish on the outside of them. No need to pull them apart.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Thu Mar 04, 2010 10:30 pm
Posts: 411
Location: Kununurra WA ^ Top End
Vehicle: 2001 Jimny M13A

Post Posted: Tue May 31, 2011 11:49 pm 
Reply with quote Top  
Try some PlastX on your headlights.

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Wed Jun 01, 2011 5:39 am 
Reply with quote Top  
Welcome to the GV owners club. That looks exactly like mine did when i bought it. The earlier GV's are alot easier to mod. no ABS or airbags.


Good choice.

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
az supporter
az supporter

Joined: Thu Mar 26, 2009 10:30 pm
Posts: 10453
Location: Perth, Australia
Vehicle: Jeep

Post Posted: Wed Jun 01, 2011 6:05 am 
Reply with quote Top  
gregdixon wrote:
I find mine tarnish after a while so I use some plastic polish on the outside of them. No need to pull them apart.


Mine fade as well, there are new ones on ebay, for $80 each... but i just use a metal polish, found it works by accident, when i was polishing my nudge bar, it works well, so i will just keep using that ! :D

 Profile WWW  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Thu Jun 02, 2011 6:21 am 
Reply with quote Top  
Those ones on ebay are for LH Drive models and are not ADR compliant. I asked the question when i needed some for mine to get it RWC.

_________________
B4T


Built by me to be driven like a rental

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 49 posts ]  Go to page Previous  1, 2

Jump to:  


Who is online

Users browsing this forum: No registered users and 1232 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours