It is currently Mon Aug 03, 2026 6:12 am
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 37 posts ]  Go to page 1, 2  Next
Author Message

Offline
User avatar

Joined: Thu May 13, 2010 1:49 am
Posts: 1041
Location: Perth

Post Posted: Sat Jul 16, 2011 9:09 am 
Reply with quote Top  
Hey looking at Finding a Set of Hilux Diffs What should u be looking for ..

year Wise Diff Ratio Wise .. Planing on putting 37s on it with 1.3 engine ..

will most likely Change engine later on Chears thanks :)

 Profile  

Offline
User avatar

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Post Posted: Sat Jul 16, 2011 9:11 am 
Reply with quote Top  
i would think that for 37s ya might as well start with something a bit stronger then hilux diffs

_________________
JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Nov 02, 2009 10:30 pm
Posts: 315
Location: Ballina

Post Posted: Sat Jul 16, 2011 9:12 am 
Reply with quote Top  
Are you Running the 1.3 transfer ?

 Profile  

Offline
User avatar

Joined: Thu May 13, 2010 1:49 am
Posts: 1041
Location: Perth

Post Posted: Sat Jul 16, 2011 9:19 am 
Reply with quote Top  
4wheeljive wrote:
Are you Running the 1.3 transfer ?


yes with the 6.5s

 Profile  

Offline
User avatar

Joined: Thu May 13, 2010 1:49 am
Posts: 1041
Location: Perth

Post Posted: Sat Jul 16, 2011 9:20 am 
Reply with quote Top  
shep wrote:
i would think that for 37s ya might as well start with something a bit stronger then hilux diffs


was planning on putting longfields or Dirty30s in it .. should be fine i would think .? ..

can i do this ?

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Post Posted: Sat Jul 16, 2011 9:31 am 
Reply with quote Top  
TryHard wrote:
shep wrote:
i would think that for 37s ya might as well start with something a bit stronger then hilux diffs


was planning on putting longfields or Dirty30s in it .. should be fine i would think .? ..

can i do this ?


I think that will be borderline Ok. You will still snap the odd longy with 37's.

_________________
2013 GV
1998 SV420 ute

 Profile  

Offline
I live here!
I live here!
User avatar

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Post Posted: Sat Jul 16, 2011 9:35 am 
Reply with quote Top  
MK/MQ Patrol? Don't they have offset rear diff too

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Post Posted: Sat Jul 16, 2011 9:36 am 
Reply with quote Top  
Scrawn wrote:
MK/MQ Patrol? Don't they have offset rear diff too


Yes but gearing options aren't as good as the lux diffs. :(

_________________
2013 GV
1998 SV420 ute

 Profile  

Offline
User avatar

Joined: Thu May 13, 2010 1:49 am
Posts: 1041
Location: Perth

Post Posted: Sat Jul 16, 2011 9:39 am 
Reply with quote Top  
Fatzook wrote:
Scrawn wrote:
MK/MQ Patrol? Don't they have offset rear diff too


Yes but gearing options aren't as good as the lux diffs. :(


:( well still i think i might go the lux diffs for now
what year does it need to be out off

 Profile  

Offline
User avatar

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Post Posted: Sat Jul 16, 2011 9:51 am 
Reply with quote Top  
i doubt you will break a longfield just with the 1.3

It can be done obviously, but you would have to be flogging the crapper out of it at full lock binded up etc.

Hilux diffs will be plenty strong enough for 37's. Alot of comp hilux's run 40's and bigger motors and they are fine.

 Profile  

Offline
User avatar

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 16343
Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.

Post Posted: Sat Jul 16, 2011 9:56 am 
Reply with quote Top  
don't you need a bundera rear to make it work?

_________________
Image

 Profile  

Offline
User avatar

Joined: Thu May 13, 2010 1:49 am
Posts: 1041
Location: Perth

Post Posted: Sat Jul 16, 2011 9:57 am 
Reply with quote Top  
canberramav wrote:
i doubt you will break a longfield just with the 1.3

It can be done obviously, but you would have to be flogging the crapper out of it at full lock binded up etc.

Hilux diffs will be plenty strong enough for 37's. Alot of comp hilux's run 40's and bigger motors and they are fine.


good to know :) i thought i herd people run 40s on them ..

still need some info on what ratios what year hilux to grab them out off

 Profile  

Offline
User avatar

Joined: Tue Jul 05, 2011 1:36 am
Posts: 170
Location: Home

Post Posted: Sat Jul 16, 2011 9:58 am 
Reply with quote Top  
hilux or patrol diffs (GU or GQ) I a looking at doing the same to mine...

 Profile  

Offline
User avatar

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Post Posted: Sat Jul 16, 2011 10:00 am 
Reply with quote Top  
The bundera lines up better so will have better driveshaft angle and in turn less prone to vibrations.

Is this for a rego/road car or trail only?

 Profile  

Offline
User avatar

Joined: Thu May 13, 2010 1:49 am
Posts: 1041
Location: Perth

Post Posted: Sat Jul 16, 2011 10:03 am 
Reply with quote Top  
canberramav wrote:
The bundera lines up better so will have better driveshaft angle and in turn less prone to vibrations.

Is this for a rego/road car or trail only?


Trail only

 Profile  

Offline
User avatar

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Post Posted: Sat Jul 16, 2011 10:13 am 
Reply with quote Top  
Look at 60 series diffs. Nice and strong and available. Good aftermarket options as well.

Dont bother with Nissan stuff. More $ to have built up and not as strong.

 Profile  

Offline
User avatar

Joined: Thu May 13, 2010 1:49 am
Posts: 1041
Location: Perth

Post Posted: Sat Jul 16, 2011 10:42 am 
Reply with quote Top  
canberramav wrote:
Look at 60 series diffs. Nice and strong and available. Good aftermarket options as well.

Dont bother with Nissan stuff. More $ to have built up and not as strong.


ok il look into it .. i will most likely some hilux diffs because i can get a set of them for next to nothing

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Nov 02, 2009 10:30 pm
Posts: 315
Location: Ballina

Post Posted: Sat Jul 16, 2011 11:19 am 
Reply with quote Top  
I have lux diffs on the road and the drive line would be a he'll of a lot better if the diff center lined up. The ratio is a 4.3 center, with the 1.3 transfer with no gears and 33s it is good and drivable for a daily on the road but a comp rig I would be chasing 5.1 diff center

 Profile  

Offline
I live here!
I live here!
User avatar

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 7681
Location: Brisbane
Vehicle: 75 Cruiser

Post Posted: Sat Jul 16, 2011 8:56 pm 
Reply with quote Top  
Look for the diffs where the front has bracing, not sure what year, might be late 80s early 90s?

and get 5.29 diff ratio :D

 Profile  

Offline
User avatar

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Post Posted: Sat Jul 16, 2011 9:55 pm 
Reply with quote Top  
The higher ratio you go the smaller your diff pinion is = weaker diff

4.88 and 6.5 transfer is enough for 37 inch tyres in any scenario. Too much even if your not doing rocks.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Oct 27, 2008 10:30 pm
Posts: 490
Location: Rosevears Tas

Post Posted: Sat Jul 16, 2011 10:08 pm 
Reply with quote Top  
canberramav wrote:
Look at 60 series diffs. Nice and strong and available. Good aftermarket options as well.

Dont bother with Nissan stuff. More $ to have built up and not as strong.


Wrong an wrong

60 series and Hilux use the same cv joints

Patrol diffs have always been known to be stronger than Landcruiser
There will be more aftermarket stuff for the Landcruiser stuff but that is because they require more beefing, oh and the fact that the Patrol was never available in the states

 Profile  

Offline
User avatar

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Post Posted: Sat Jul 16, 2011 10:25 pm 
Reply with quote Top  
Not wrong

Didnt say that hilux and 60's use different CV's?? I know they are the same.

Yes GU diffs may be stronger out of the box? So what? Its pretty marginal anyway from what ive read.They are still not strong enough for comp work.

Throw some chromo into your GU diffs = $1800, chromo hubs = $400+

Landcruiser/Hilux stuff can be built stronger and for less than half the price.
Around $800 will get you Longfileds with warranty.

GU stuff no warranty and not as strong.

 Profile  

Offline
I live here!
I live here!
User avatar

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 7681
Location: Brisbane
Vehicle: 75 Cruiser

Post Posted: Sat Jul 16, 2011 10:33 pm 
Reply with quote Top  
canberramav wrote:
pretty marginal anyway from what ive read..


Is the pinion size pretty marginal too? How many people have broken them?

I honestly don't know, but when i looked at my 5.29 gears, they looked the same as 4.88.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Oct 27, 2008 10:30 pm
Posts: 490
Location: Rosevears Tas

Post Posted: Sat Jul 16, 2011 10:54 pm 
Reply with quote Top  
OK so why would YOU (not ment to be rude, just a question directed at your opinion) not stick with the hilux diffs

canberramav wrote:
i doubt you will break a longfield just with the 1.3

It can be done obviously, but you would have to be flogging the crapper out of it at full lock binded up etc.

Hilux diffs will be plenty strong enough for 37's. Alot of comp hilux's run 40's and bigger motors and they are fine.


plus's that I see. Very cheap to buy and most likley have 4.88 ratios, better ground clearance, cheap Longfields etc.. you can buy kits to fit into the sierra (for those umong us how like to talk the talk but not walk the walk..)

Minus's Its not suzuki stuff and that is frowned apon by many on this forum

And on the Toyota v Nissan axle debate. in stock form Nissan is stronger.... marginal or not and we are talking in this instance of a 1.3L engine :D

 Profile  

Offline
User avatar

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Post Posted: Sat Jul 16, 2011 11:01 pm 
Reply with quote Top  
I would just stick with the Hilux diffs. They are fine.

I recommended he look at the 60's before he mentioned he can get the hilux ones cheap.

60's put the rear diff in a better position though unless you get a bundera diff.

A 1.3 engine will bust stock GU stuff no worries at all. Especially with 37' stickies. (In a comp or similar terrain)

Generally with the stuff we drive to put into perspective.......We put a standard 60 CV in one of our zooks and it lasted 10 minutes. We had previoulsy been driving all day with the longfield.

 Profile  

Offline
User avatar

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Post Posted: Sat Jul 16, 2011 11:05 pm 
Reply with quote Top  
Steve
I ran 5.29 in my 60 diffs and they were fine.

I just think for the 37 tyres you only need to run a 4.88

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Oct 27, 2008 10:30 pm
Posts: 490
Location: Rosevears Tas

Post Posted: Sat Jul 16, 2011 11:46 pm 
Reply with quote Top  
canberramav wrote:
I would just stick with the Hilux diffs. They are fine.

I recommended he look at the 60's before he mentioned he can get the hilux ones cheap.


fair enough

canberramav wrote:
A 1.3 engine will bust stock GU stuff no worries at all. Especially with 37' stickies. (In a comp or similar terrain)

Generally with the stuff we drive to put into perspective.......We put a standard 60 CV in one of our zooks and it lasted 10 minutes. We had previoulsy been driving all day with the longfield.


Rock crawling I presume? not much of that goes on down this way :cry:

My Hilux diff has been fine for the last 7 years, mine spec cv's tough

and my patrol's front end is still fine, time will tell though i suppose. Like I said not much "rock crawling" going on down this way. Would love to get your way for a bit and check out what happens :D

 Profile  

Offline
User avatar

Joined: Tue Jan 12, 2010 10:30 pm
Posts: 2801
Location: Perth

Post Posted: Sun Jul 17, 2011 2:52 am 
Reply with quote Top  
I would go Lux diffs over Patrols because they are easier and cheaper on aftermarket parts, when you start looking at comps and sticky tyres.

4.88 came out in the petrol luxs in all years, I think. 4.88's and the 6.5 should be fine for the setup you currently have. If you are looking at upgrading or seriously comping it I would look for a diesel or surf diff, 4.5, 4.1 etc as you can then run aftermarket 5.29's in them which are no weaker then the stock lower numbered gears. The stock 4.8's and stock 5.29's run a thinner/weaker ring gear and more centred pinion then the aftermarket gears which is why you cant fit the aftermarket ones in those centres. See link below.

http://www.westcoastcrawlers.com.au/php ... diff+gears

 Profile  

Offline
User avatar

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Post Posted: Sun Jul 17, 2011 6:18 am 
Reply with quote Top  
Are there enough comps in WA to take a car off the road for? Do you have access to lots of private property?

It gets pretty boring to have a very capable car you can only drive for a few hours a year because it can only be driven on comps.

Just a thought.

A less capable car you can drive more is heaps more fun than a trail car that's sitting in the shed.

Steve.

 Profile  

Offline
User avatar

Joined: Thu May 13, 2010 1:49 am
Posts: 1041
Location: Perth

Post Posted: Sun Jul 17, 2011 6:36 am 
Reply with quote Top  
Red89 wrote:
I would go Lux diffs over Patrols because they are easier and cheaper on aftermarket parts, when you start looking at comps and sticky tyres.

4.88 came out in the petrol luxs in all years, I think. 4.88's and the 6.5 should be fine for the setup you currently have. If you are looking at upgrading or seriously comping it I would look for a diesel or surf diff, 4.5, 4.1 etc as you can then run aftermarket 5.29's in them which are no weaker then the stock lower numbered gears. The stock 4.8's and stock 5.29's run a thinner/weaker ring gear and more centred pinion then the aftermarket gears which is why you cant fit the aftermarket ones in those centres. See link below.

http://www.westcoastcrawlers.com.au/php ... diff+gears

thanks so much for that info :)

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 37 posts ]  Go to page 1, 2  Next

Jump to:  


Who is online

Users browsing this forum: Google [Bot] and 903 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours