auszookers.com • View topic - steel housing mod for 92 vit

Board index » Talking About Stuff » Suzuki Talk

steel housing mod for 92 vit

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

tszook

Joined: Thu Apr 22, 2010 11:30 pm
Posts: 57
Location: sydney narrabeen

Posted: Thu Jul 21, 2011 1:09 am

vitara steel house for 92 vit whats needed

Brett

az supporter

Joined: Tue May 27, 2008 11:30 pm
Posts: 1791
Location: Central coast NSW

Posted: Thu Jul 21, 2011 3:07 am

Have a search, there is plenty on here about it.

Put a little effort in and people will help you out

RIKSTR

az supporter

Joined: Sun Apr 26, 2009 11:30 pm
Posts: 1278
Location: Canberra

Posted: Thu Jul 21, 2011 3:41 am

The housing, everything else will bolt up.

jimbo_jones

az supporter

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 4361
Location: gong
Vehicle: 2015 Jimny, LJ50, Maruti

Posted: Thu Jul 21, 2011 6:13 am

buzbox did his not to long ago after breaking 2 alloy ones I was there of one of them

_________________
www.illawarrasuzuki4wdclub.webs.com

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Thu Jul 21, 2011 6:17 am

RIKSTR wrote:

The housing, everything else will bolt up.

isn't bolting it up is the easy bit, pretty sure there is more to it than that.

_________________
You're just hating because you don't understand

skyman

Joined: Wed Nov 17, 2010 2:06 pm
Posts: 1328
Location: Yakima, wa (us)

Posted: Thu Jul 21, 2011 8:54 am

tszook wrote:

vitara steel house for 92 vit whats needed

Beer, and plenty of it too. :blink:

fire60

Joined: Sat Oct 16, 2010 2:02 am
Posts: 96
Location: Wellington NZ

Posted: Thu Jul 21, 2011 8:56 am

I did this mod a couple of years ago. Changed axle and diff housings to steel. fairly easy, you have to pull the axles out, be carefull not to damage the seals in the donor housing when you put the axles back or you will have an oil leak that you will only discover when it is all back together. Some oil on the seals before sliding axles in will help.

fire60

Joined: Sat Oct 16, 2010 2:02 am
Posts: 96
Location: Wellington NZ

Posted: Thu Jul 21, 2011 8:56 am

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Thu Jul 21, 2011 9:06 am

do you have to worry about changing the diff ratio's?

_________________
You're just hating because you don't understand

fire60

Joined: Sat Oct 16, 2010 2:02 am
Posts: 96
Location: Wellington NZ

Posted: Fri Jul 22, 2011 8:22 pm

Ratios depend on what you are using it for, but make sure that the new diff is the same as the old one or the rear. You may have to swap over the crown wheel and pinion to do this.

Page 1 of 1

[ 10 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 257 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum