| Author |
Message |
dave07

az supporter
Joined: Wed Oct 07, 2009 10:30 pm Posts: 329 Location: Bunbury, WA
|
 Posted: Sat Jul 23, 2011 12:49 pm |
|
|
Today my vitara started making a weird whining noise. last week i had massive vibrations from the rear. I have the calmini 3" lift and i found my a frame in the rear the nut holding the diff in place had come loose i titghtened it up and all was good except i has still getting some loud sounds from the rear but today while driving i got a weird whining noise it would come in intermittently at no particular speed or gear. Has anyone with the calmini lift experienced this noise?
_________________ Vitara JX 1.6, straight through 2 1/4" exhaust, 2.
|
|
|
|
 |
tszook
Joined: Thu Apr 22, 2010 11:30 pm Posts: 57 Location: sydney narrabeen
|
 Posted: Sun Jul 24, 2011 7:47 am |
|
|
check tail shaft angle and then look at rear wheels bearings jack car up and put on stands first and put in drive let clutch out slowly and see if the nosie is from the axle area or centre of the diff
|
|
|
|
 |
stocker
Joined: Wed Dec 08, 2010 7:16 am Posts: 941 Location: Shidoni!
|
 Posted: Sun Jul 24, 2011 9:36 am |
|
i had a similar thing when i put my lift in, turns out rear wheel bearings were shot 
_________________ Stocker
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Sun Jul 24, 2011 1:29 pm |
|
|
how much thread do you have showing on the heim joint?
_________________ You're just hating because you don't understand
|
|
|
|
 |
Joe

I live here!
Joined: Sat Jul 04, 2009 11:30 pm Posts: 49041 Location: Rockingham W.A
Vehicle: JB74
|
 Posted: Sun Jul 24, 2011 1:32 pm |
|
atari4x4 wrote: how much thread do you have showing on the heim joint?
Last time i seen it it was screwed all the way in
_________________ Joe likes boobs ( . )( . ) ( ° )( ° )
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Sun Jul 24, 2011 1:33 pm |
|
|
yeah mine is pretty much the whole way in.
_________________ You're just hating because you don't understand
|
|
|
|
 |
Joe

I live here!
Joined: Sat Jul 04, 2009 11:30 pm Posts: 49041 Location: Rockingham W.A
Vehicle: JB74
|
 Posted: Sun Jul 24, 2011 1:36 pm |
|
|
Mine is 3/4 of the way out, if i screw it in any more i get a vibration from the tail shaft
_________________ Joe likes boobs ( . )( . ) ( ° )( ° )
|
|
|
|
 |
Lockie666

az supporter
Joined: Sat Apr 17, 2010 11:30 pm Posts: 1874 Location: Perth
|
 Posted: Sun Jul 24, 2011 1:50 pm |
|
|
Uni - Tailshaft, check for play in them Dave.
_________________ helloo
|
|
|
|
 |
alien
Joined: Wed Mar 24, 2010 10:30 pm Posts: 16343 Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.
|
 Posted: Sun Jul 24, 2011 1:55 pm |
|
|
whining sounds in my sierra is usually a wheel bearing, but its also accompanied by a vibration and a clunk on cornering...
_________________ 
|
|
|
|
 |
dave07

az supporter
Joined: Wed Oct 07, 2009 10:30 pm Posts: 329 Location: Bunbury, WA
|
 Posted: Sun Jul 24, 2011 2:01 pm |
|
|
thanks guys yeah the unis are fine. my heim jont is 3/4 of the way out so my rear coils are pretty much straight. yeah i might check my bearings cause thats all i can think of
_________________ Vitara JX 1.6, straight through 2 1/4" exhaust, 2.
|
|
|
|
 |
Polar_Bear
Joined: Sat Aug 12, 2006 11:30 pm Posts: 2511 Location: Adelaide SA
|
 Posted: Sun Jul 24, 2011 2:09 pm |
|
just be careful how far that heim is screwed out...mine let go cos it was only in by 1/4 of the way 
_________________ Go Hard, Trailer Home
|
|
|
|
 |
buzbox
Joined: Thu Jul 16, 2009 11:30 pm Posts: 3600 Location: Wollongong NSW
Vehicle: LWB Sierra & XL7
|
 Posted: Mon Jul 25, 2011 7:25 am |
|
|
Sometimes I get a whining sound in my car, but I just tell her to shut up.
|
|
|
|
 |
Chop

az supporter
Joined: Sat Aug 12, 2006 11:30 pm Posts: 6456 Location: Radelaide ofcourse!
Vehicle: Suzuki GV 03/ 2010 DDIS NGV
|
 Posted: Mon Jul 25, 2011 9:43 am |
|
Polar_Bear wrote: just be careful how far that heim is screwed out...mine let go cos it was only in by 1/4 of the way 
The hiding it copped at the narra 4wd event didnt help it? 
_________________ Chop
Suzuki's are like Mogwai's, they multiply!
|
|
|
|
 |
Polar_Bear
Joined: Sat Aug 12, 2006 11:30 pm Posts: 2511 Location: Adelaide SA
|
 Posted: Mon Jul 25, 2011 12:40 pm |
|
Chop wrote: Polar_Bear wrote: just be careful how far that heim is screwed out...mine let go cos it was only in by 1/4 of the way  The hiding it copped at the narra 4wd event didnt help it? 
dont think it had anything to do with it 
_________________ Go Hard, Trailer Home
|
|
|
|
 |
|