It is currently Sun Aug 02, 2026 3:05 pm
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 14 posts ] 
Author Message

Offline
az supporter
az supporter
User avatar

Joined: Wed Oct 07, 2009 10:30 pm
Posts: 329
Location: Bunbury, WA

Post Posted: Sat Jul 23, 2011 12:49 pm 
Reply with quote Top  
Today my vitara started making a weird whining noise. last week i had massive vibrations from the rear. I have the calmini 3" lift and i found my a frame in the rear the nut holding the diff in place had come loose i titghtened it up and all was good except i has still getting some loud sounds from the rear but today while driving i got a weird whining noise it would come in intermittently at no particular speed or gear. Has anyone with the calmini lift experienced this noise?

_________________
Vitara JX 1.6, straight through 2 1/4" exhaust, 2.

 Profile  

Offline
User avatar

Joined: Thu Apr 22, 2010 11:30 pm
Posts: 57
Location: sydney narrabeen

Post Posted: Sun Jul 24, 2011 7:47 am 
Reply with quote Top  
check tail shaft angle and then look at rear wheels bearings jack car up and put on stands first and put in drive let clutch out slowly and see if the nosie is from the axle area or centre of the diff

 Profile  

Offline
User avatar

Joined: Wed Dec 08, 2010 7:16 am
Posts: 941
Location: Shidoni!

Post Posted: Sun Jul 24, 2011 9:36 am 
Reply with quote Top  
i had a similar thing when i put my lift in, turns out rear wheel bearings were shot :)

_________________
Stocker

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Post Posted: Sun Jul 24, 2011 1:29 pm 
Reply with quote Top  
how much thread do you have showing on the heim joint?

_________________
You're just hating because you don't understand

 Profile WWW  

Offline
I live here!
I live here!
User avatar

Joined: Sat Jul 04, 2009 11:30 pm
Posts: 49041
Location: Rockingham W.A
Vehicle: JB74

Post Posted: Sun Jul 24, 2011 1:32 pm 
Reply with quote Top  
atari4x4 wrote:
how much thread do you have showing on the heim joint?


Last time i seen it it was screwed all the way in

_________________
Joe likes boobs ( . )( . ) ( ° )( ° )

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Post Posted: Sun Jul 24, 2011 1:33 pm 
Reply with quote Top  
yeah mine is pretty much the whole way in.

_________________
You're just hating because you don't understand

 Profile WWW  

Offline
I live here!
I live here!
User avatar

Joined: Sat Jul 04, 2009 11:30 pm
Posts: 49041
Location: Rockingham W.A
Vehicle: JB74

Post Posted: Sun Jul 24, 2011 1:36 pm 
Reply with quote Top  
Mine is 3/4 of the way out, if i screw it in any more i get a vibration from the tail shaft

_________________
Joe likes boobs ( . )( . ) ( ° )( ° )

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Apr 17, 2010 11:30 pm
Posts: 1874
Location: Perth

Post Posted: Sun Jul 24, 2011 1:50 pm 
Reply with quote Top  
Uni - Tailshaft, check for play in them Dave.

_________________
helloo

 Profile  

Offline
User avatar

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 16343
Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.

Post Posted: Sun Jul 24, 2011 1:55 pm 
Reply with quote Top  
whining sounds in my sierra is usually a wheel bearing, but its also accompanied by a vibration and a clunk on cornering...

_________________
Image

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Oct 07, 2009 10:30 pm
Posts: 329
Location: Bunbury, WA

Post Posted: Sun Jul 24, 2011 2:01 pm 
Reply with quote Top  
thanks guys yeah the unis are fine. my heim jont is 3/4 of the way out so my rear coils are pretty much straight. yeah i might check my bearings cause thats all i can think of

_________________
Vitara JX 1.6, straight through 2 1/4" exhaust, 2.

 Profile  

Offline
User avatar

Joined: Sat Aug 12, 2006 11:30 pm
Posts: 2511
Location: Adelaide SA

Post Posted: Sun Jul 24, 2011 2:09 pm 
Reply with quote Top  
just be careful how far that heim is screwed out...mine let go cos it was only in by 1/4 of the way :crazy:

_________________
Go Hard, Trailer Home

 Profile  

Offline
User avatar

Joined: Thu Jul 16, 2009 11:30 pm
Posts: 3600
Location: Wollongong NSW
Vehicle: LWB Sierra & XL7

Post Posted: Mon Jul 25, 2011 7:25 am 
Reply with quote Top  
Sometimes I get a whining sound in my car, but I just tell her to shut up.

_________________
'92 Vitara & Camper trailer

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Aug 12, 2006 11:30 pm
Posts: 6456
Location: Radelaide ofcourse!
Vehicle: Suzuki GV 03/ 2010 DDIS NGV

Post Posted: Mon Jul 25, 2011 9:43 am 
Reply with quote Top  
Polar_Bear wrote:
just be careful how far that heim is screwed out...mine let go cos it was only in by 1/4 of the way :crazy:


The hiding it copped at the narra 4wd event didnt help it? :lol:

_________________
Chop

Suzuki's are like Mogwai's, they multiply!

 Profile  

Offline
User avatar

Joined: Sat Aug 12, 2006 11:30 pm
Posts: 2511
Location: Adelaide SA

Post Posted: Mon Jul 25, 2011 12:40 pm 
Reply with quote Top  
Chop wrote:
Polar_Bear wrote:
just be careful how far that heim is screwed out...mine let go cos it was only in by 1/4 of the way :crazy:


The hiding it copped at the narra 4wd event didnt help it? :lol:


dont think it had anything to do with it :crazy:

_________________
Go Hard, Trailer Home

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 267 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours