It is currently Wed Jul 22, 2026 10:44 pm
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 11 posts ] 
Author Message

Offline
az supporter
az supporter
User avatar

Joined: Mon Oct 06, 2008 10:30 pm
Posts: 689
Location: Adelaide

Post Posted: Sun Nov 30, 2008 2:11 am 
Reply with quote Top  
hiya guys. i got a steering box out of a wrecked sierra with no play in it. so thats better than my box with 2 1/2 inches of play in it.

getting it out of the wrecked sierra was a bastard, but because u tend 2 not give a stuff about anything, apart from the thing u want, its ok.

problem is. i cant disconnect the steering box arm, from the steering arm that connects to the left hand wheel.

i have removed the pin, and loosened the bolt to the top of the thread, then hit it from above. sprayed the crap out of it with rp7, but still cant get it off.

anyone got any advice on how to get it off? its the 1 thing stopping me from finishing the job. and im starting to get annoyed with it..

_________________
Download Sets @ http://www.johnpaul.3leggedcat.net

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun Aug 06, 2006 11:30 pm
Posts: 596
Location: Queanbeyan

Post Posted: Sun Nov 30, 2008 2:42 am 
Reply with quote Top  
Go to supercheap and buy a ball-joint separator. You will have it off in 30 seconds :wink:

_________________
Member of C.O.R 4x4

 Profile  

Offline
User avatar

Joined: Sat May 10, 2008 11:30 pm
Posts: 3273
Location: melbourne

Post Posted: Sun Nov 30, 2008 3:14 am 
Reply with quote Top  
Image

_________________
builder of custom road legal zooks......and stuff.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Oct 06, 2008 10:30 pm
Posts: 689
Location: Adelaide

Post Posted: Sun Nov 30, 2008 3:18 am 
Reply with quote Top  
ha, nice pic. sure i'll give that a go.

and if no luck. off to super cheap. i figured their would b a better way than what im doin. but im no mechanic. so wasn't sure.

_________________
Download Sets @ http://www.johnpaul.3leggedcat.net

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 4003
Location: Brisbane

Post Posted: Sun Nov 30, 2008 2:27 pm 
Reply with quote Top  
Now Now Joe, That's not a noob pic :-)

_________________
[quote="royce"] I wouldnt mind insulating my rear

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Aug 01, 2006 11:30 pm
Posts: 3459
Location: licking some windows
Vehicle: LJ20 LJ50

Post Posted: Sun Nov 30, 2008 2:46 pm 
Reply with quote Top  
hitting the side causes a shock load through the taper shaft

this causes it to drop off. But with a piarm they can be very tight. Sometimes you will need a pitman arm puller to remove it.

nobcad for those less technical


You do not have the required permissions to view the files attached to this post.

_________________
Camels have nice toes

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Oct 06, 2008 10:30 pm
Posts: 689
Location: Adelaide

Post Posted: Sun Nov 30, 2008 9:29 pm 
Reply with quote Top  
well it beat me. i cant get ther F*%ING thing off. so im gonna give the car 2 a mechanic. i bought a ball joint puller and lump hammer and thats not enough. its not the arm that comes directly off the steering box. its the arm that comes From that to the left wheel. thats the 1 i was trying 2 get off, and it just aint hapenin..

but thanks 4 tryin 2 help guys :-)

_________________
Download Sets @ http://www.johnpaul.3leggedcat.net

 Profile  

Offline
omnipotent being
omnipotent being
User avatar

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Post Posted: Sun Nov 30, 2008 9:34 pm 
Reply with quote Top  
swing the hammer harder, like really hard like you are trying to break it

you wont hurt anything even if you miss and smack the chassis a few times :)

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Oct 06, 2008 10:30 pm
Posts: 689
Location: Adelaide

Post Posted: Mon Dec 01, 2008 12:24 pm 
Reply with quote Top  
na i'v given up. when u have hit it that many times, sprayed it with WD40, left it overnight & smacked the shit out of it some more, & u got nowhere & have spent hours on it, its time 2 give up. so its going 2 the mechanic tuesday/wednesday. & hopefully when i get it back, i'll b able 2 go in a relatively straight line..

_________________
Download Sets @ http://www.johnpaul.3leggedcat.net

 Profile  

Offline
az supporter
az supporter

Joined: Tue May 27, 2008 11:30 pm
Posts: 1791
Location: Central coast NSW

Post Posted: Mon Dec 01, 2008 6:14 pm 
Reply with quote Top  
keep using wd 40 for a few days, it won't happen over night but it will over a few if you keep soaking it.

 Profile  

Offline
User avatar

Joined: Sat May 10, 2008 11:30 pm
Posts: 3273
Location: melbourne

Post Posted: Mon Dec 01, 2008 10:13 pm 
Reply with quote Top  
and stop tapping it like a girlie-man. :wink:

_________________
builder of custom road legal zooks......and stuff.

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

Jump to:  


Who is online

Users browsing this forum: Google [Bot], ProteinDrinker and 402 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours