| Author |
Message |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Sun Dec 07, 2008 4:10 am |
|
|
behind the glove box in my sierra cable tied to the bracket that the bonnet cable goes through there is a little black box
is that supposed to be there or is some weird thing the previous owner installed?
Cheers
_________________ [quote="Fluffy"] yeah right mate like Im gunna mov
|
|
|
|
 |
joeblow
Joined: Sat May 10, 2008 11:30 pm Posts: 3273 Location: melbourne
|
 Posted: Sun Dec 07, 2008 4:43 am |
|
|
if its on a widetrack its an emissions control module. yes, should be there.
_________________ builder of custom road legal zooks......and stuff.
|
|
|
|
 |
lump_a_charcoal

az supporter
Joined: Wed Feb 28, 2007 10:30 pm Posts: 4454 Location: Botany, NSW
Vehicle: MY2019 Jimny
|
 Posted: Sun Dec 07, 2008 2:54 pm |
|
|
Or if you have enemies it could be a bomb...
|
|
|
|
 |
Rockhopper
Joined: Sun Jun 22, 2008 11:30 pm Posts: 1265 Location: Chipping Norton
|
 Posted: Mon Dec 08, 2008 11:14 am |
|
joeblow wrote: if its on a widetrack its an emissions control module. yes, should be there.
What does an emission controls module do (apart from nothing) on a 1.3 carburettor powered car?? 
_________________ We're riding in the Ninky Nonk!
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Mon Dec 08, 2008 11:49 am |
|
|
turns the EGR and charcoal cannister purge on and off depending on what gear its in
|
|
|
|
 |
Rockhopper
Joined: Sun Jun 22, 2008 11:30 pm Posts: 1265 Location: Chipping Norton
|
 Posted: Tue Dec 09, 2008 12:53 am |
|
|
I would've thought that was vaccum related
_________________ We're riding in the Ninky Nonk!
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Tue Dec 09, 2008 1:03 am |
|
|
vacuum actuates it but it tells it when it can turn on, from memory it doesnt turn on in 4th and 5th so its doesnt loose power
those little vacuum solenoids on the inlet manifold are controlled by it
|
|
|
|
 |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Tue Dec 09, 2008 1:10 am |
|
|
does it do anything when using a non standard carbie?
_________________ [quote="Fluffy"] yeah right mate like Im gunna mov
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Tue Dec 09, 2008 1:30 am |
|
|
yes none of it is hooked to teh carby
|
|
|
|
 |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Tue Dec 09, 2008 1:42 am |
|
|
but what if the charcoal canister isn't hooked up to anything except the line from the fuel tank?
_________________ [quote="Fluffy"] yeah right mate like Im gunna mov
|
|
|
|
 |
|