auszookers.com • View topic - moving diff forward

Board index » Talking About Stuff » Suzuki Talk

moving diff forward

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

hooki

az supporter

Joined: Mon Jul 21, 2008 11:30 pm
Posts: 1785
Location: perth, WA
Vehicle: 85' LWB Sierra, 01' S15

Posted: Mon Dec 08, 2008 9:45 am

hi guys,

will be installing the suspension in the car some time this week. I'm doing the 1/2 ruf and as a result i will have to move the diff forward. I think i have an idea about how to go about doing it but was just wondering if anyone had some photos of the actual drilling of the perch and other parts.

Damo

az supporter

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 4661
Location: Brisbane

Posted: Mon Dec 08, 2008 8:09 pm

hooki wrote:

As a matter of fact I do! Link to my members thread here.

You don't need a drill press though, I have done it before with a hand drill. It's probably best if you step up gradually if doing it with a hand drill. If you try and do it all in one hit it will most likely get your drill bit too hot and it will lose it's edge. It could also catch, which could stall the drill, or if your drill has enough torque rip your hand around and break your wrist! Just go steady and you'll be OK.

_________________
SJ50.4.LYF

hooki

az supporter

Joined: Mon Jul 21, 2008 11:30 pm
Posts: 1785
Location: perth, WA
Vehicle: 85' LWB Sierra, 01' S15

Posted: Mon Dec 08, 2008 10:26 pm

cheers damo. will i be able to do it without removing the diff like you have done?

_________________
79' LJ80 (sold) :(
95' & 97' sierra (sold)

Damo

az supporter

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 4661
Location: Brisbane

Posted: Tue Dec 09, 2008 12:46 am

hooki wrote:

cheers damo. will i be able to do it without removing the diff like you have done?

Yeah you should be able to.

_________________
SJ50.4.LYF

hooki

az supporter

Joined: Mon Jul 21, 2008 11:30 pm
Posts: 1785
Location: perth, WA
Vehicle: 85' LWB Sierra, 01' S15

Posted: Fri Dec 12, 2008 8:52 pm

ok, i'v moved the diff forward and all the suspension is in. Just wondering if i should get a drive shaft spacer as the spline in the shaft has come out heaps?

_________________
79' LJ80 (sold) :(
95' & 97' sierra (sold)

hooki

az supporter

Joined: Mon Jul 21, 2008 11:30 pm
Posts: 1785
Location: perth, WA
Vehicle: 85' LWB Sierra, 01' S15

Posted: Fri Dec 12, 2008 9:00 pm

heres a pic.

You do not have the required permissions to view the files attached to this post.

hooki

az supporter

Joined: Mon Jul 21, 2008 11:30 pm
Posts: 1785
Location: perth, WA
Vehicle: 85' LWB Sierra, 01' S15

Posted: Fri Dec 12, 2008 9:00 pm

also, who sells drive shaft spacers?

_________________
79' LJ80 (sold) :(
95' & 97' sierra (sold)

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Fri Dec 12, 2008 11:58 pm

def get ya self a spacer. about the same size as how far you moved the diff forward

_________________
B4T

Built by me to be driven like a rental

Bruce

az supporter

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 4003
Location: Brisbane

Posted: Sat Dec 13, 2008 12:18 pm

hooki wrote:

also, who sells drive shaft spacers?

"4WD USA" in Perth sell them mate :wink:

_________________
[quote="royce"] I wouldnt mind insulating my rear

zookernator

Joined: Sun Mar 16, 2008 10:30 pm
Posts: 813
Location: Tasmania

Posted: Sat Dec 13, 2008 4:27 pm

Go to a metal fab place and get a qoute.. very easy thing to make when you have the right tools.. reckon it would be HEAPS cheaper to go that way!

_________________
F&R ARB air lockers, lux diffs, 4 link coil rear,

Page 1 of 1

[ 10 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 363 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum